Skip to contentSkip to conversation

MOUT PCI(E)424

DISCUSSION Fons Adriaensen 2 participants 2 messages Jan 25, 2007

lore
Share & tools
lore
#0 lore raw

Is the MOTU PCI(E) 424 supported by ALSA ?

It's not in the matrix on the ALSA site, so the answer is probably 'no'. Any alternatives ? We need 24 analog outputs at 96 kHz, and a few inputs.

TIA,

Signature · 10 lines
FA

Lascia la spina, cogli la rosa.


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
#1 lore raw
Quoted 4 lines · Fons Adriaensen

Is the MOTU PCI(E) 424 supported by ALSA ?

It's not in the matrix on the ALSA site, so the answer is probably 'no'. Any alternatives ? We need 24 analog outputs at 96 kHz, and a few inputs.

RME HDSP MADI card? That can handle 32 ins and 32 outs at 96kHz, but getting signals in and out of MADI format is expensive (eg. RME ADI-648 plus 3 x 8-channel 96kHz ADAT interfaces).

The only other alternative AFAIK is to use 3 x 8-channel cards (eg. M-Audio Delta 1010(LT) synced via S/PDIF), but you can probably forget about low-latency operation with jackd if you do that - pcm_multi and -rt kernel didn't work together with jackd last time I tried (big xruns on SMP, lockup on UP).

John

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV