Cleanup of CHSC event handling.
Subsystems (2)
From: Peter Oberparleiter <[email protected]>
[S390] Cleanup of CHSC event handling.
Change CHSC event handling to be more easily extensible.
Signed-off-by Peter Oberparleiter <[email protected]>
Signed-off-by Martin Schwidefsky <[email protected]>
---
drivers/s390/cio/chsc.c | 232 +++++++++++++++++++++++------------------------- 1 files changed, 112 insertions(+), 120 deletions(-)
drivers/s390/cio/chsc.c +112 -120
@@ -461,144 +461,136 @@ __get_chpid_from_lir(void *data)return (u16) (lir->indesc[0 ]&0x000000ff ); } -int -chsc_process_crw (void ) +struct chsc_sei_area { +struct chsc_header request; +u32 reserved1; +u32 reserved2; +u32 reserved3; +struct chsc_header response; +u32 reserved4; +u8 flags; +u8 vf;/* validity flags */ +u8 rs;/* reporting source */ +u8 cc;/* content code */ +u16 fla;/* full link address */ +u16 rsid;/* reporting source id */ +u32 reserved5; +u32 reserved6; +u8 ccdf[4096 -16 -24 ];/* content-code dependent field */ +/* ccdf has to be big enough for a link-incident record */ +} __attribute__ ((packed)); + +static int chsc_process_sei_link_incident (struct chsc_sei_area *sei_area) +{ +int chpid; + +CIO_CRW_EVENT (4 ,"chsc: link incident (rs=%02x, rs_id=%04x)\n" , + sei_area->rs, sei_area->rsid); +if (sei_area->rs !=4 ) +return 0 ; + chpid =__get_chpid_from_lir (sei_area->ccdf); +if (chpid <0 ) +CIO_CRW_EVENT (4 ,"chsc: link incident - invalid LIR\n" ); +else +s390_set_chpid_offline (chpid); + +return 0 ; +} + +static int chsc_process_sei_res_acc (struct chsc_sei_area *sei_area) { -int chpid, ret;struct res_acc_data res_data; -struct { -struct chsc_header request; -u32 reserved1; -u32 reserved2; -u32 reserved3; -struct chsc_header response; -u32 reserved4; -u8 flags; -u8 vf;/* validity flags */ -u8 rs;/* reporting source */ -u8 cc;/* content code */ -u16 fla;/* full link address */ -u16 rsid;/* reporting source id */ -u32 reserved5; -u32 reserved6; -u32 ccdf[96 ];/* content-code dependent field */ -/* ccdf has to be big enough for a link-incident record */ - } __attribute__ ((packed)) *sei_area; +struct device *dev; +int status; +int rc; + +CIO_CRW_EVENT (4 ,"chsc: resource accessibility event (rs=%02x, " +"rs_id=%04x)\n" , sei_area->rs, sei_area->rsid); +if (sei_area->rs !=4 ) +return 0 ; +/* allocate a new channel path structure, if needed */ + status =get_chp_status (sei_area->rsid); +if (status <0 ) +new_channel_path (sei_area->rsid); +else if (!status) +return 0 ; + dev =get_device (&css[0 ]->chps[sei_area->rsid]->dev); +memset (&res_data,0 ,sizeof (struct res_acc_data )); + res_data.chp =to_channelpath (dev); +if ((sei_area->vf &0xc0 ) !=0 ) { + res_data.fla = sei_area->fla; +if ((sei_area->vf &0xc0 ) ==0xc0 ) +/* full link address */ + res_data.fla_mask =0xffff ; +else +/* link address */ + res_data.fla_mask =0xff00 ; + } + rc =s390_process_res_acc (&res_data); +put_device (dev); + +return rc; +} + +static int chsc_process_sei (struct chsc_sei_area *sei_area) +{ +int rc; + +/* Check if we might have lost some information. */ +if (sei_area->flags &0x40 ) +CIO_CRW_EVENT (2 ,"chsc: event overflow\n" ); +/* which kind of information was stored? */ + rc =0 ; +switch (sei_area->cc) { +case 1 :/* link incident*/ + rc =chsc_process_sei_link_incident (sei_area); +break ; +case 2 :/* i/o resource accessibiliy */ + rc =chsc_process_sei_res_acc (sei_area); +break ; +default :/* other stuff */ +CIO_CRW_EVENT (4 ,"chsc: unhandled sei content code %d\n" , + sei_area->cc); +break ; + } + +return rc; +} + +int chsc_process_crw (void ) +{ +struct chsc_sei_area *sei_area; +int ret; +int rc;if (!sei_page)return 0 ; -/* -* build the chsc request block for store event information -* and do the call -* This function is only called by the machine check handler thread, -* so we don't need locking for the sei_page. -*/ +/* Access to sei_page is serialized through machine check handler +* thread, so no need for locking. */ sei_area = sei_page;CIO_TRACE_EVENT (2 ,"prcss" ); ret =0 ;do { -int ccode, status; -struct device *dev;memset (sei_area,0 ,sizeof (*sei_area)); -memset (&res_data,0 ,sizeof (struct res_acc_data )); sei_area->request.length =0x0010 ; sei_area->request.code =0x000e ; +if (chsc (sei_area)) +break ; - ccode =chsc (sei_area); -if (ccode >0 ) -return 0 ; - -switch (sei_area->response.code) { -/* for debug purposes, check for problems */ -case 0x0001 : -CIO_CRW_EVENT (4 ,"chsc_process_crw: event information " -"successfully stored\n" ); -break ;/* everything ok */ -case 0x0002 : -CIO_CRW_EVENT (2 , -"chsc_process_crw: invalid command!\n" ); -return 0 ; -case 0x0003 : -CIO_CRW_EVENT (2 ,"chsc_process_crw: error in chsc " -"request block!\n" ); -return 0 ; -case 0x0005 : -CIO_CRW_EVENT (2 ,"chsc_process_crw: no event " -"information stored\n" ); -return 0 ; -default : -CIO_CRW_EVENT (2 ,"chsc_process_crw: chsc response %d\n" , +if (sei_area->response.code ==0x0001 ) { +CIO_CRW_EVENT (4 ,"chsc: sei successful\n" ); + rc =chsc_process_sei (sei_area); +if (rc) + ret = rc; + }else { +CIO_CRW_EVENT (2 ,"chsc: sei failed (rc=%04x)\n" , sei_area->response.code); -return 0 ; - } - -/* Check if we might have lost some information. */ -if (sei_area->flags &0x40 ) -CIO_CRW_EVENT (2 ,"chsc_process_crw: Event information " -"has been lost due to overflow!\n" ); - -if (sei_area->rs !=4 ) { -CIO_CRW_EVENT (2 ,"chsc_process_crw: reporting source " -"(%04X) isn't a chpid!\n" , - sei_area->rsid); -continue ; - } - -/* which kind of information was stored? */ -switch (sei_area->cc) { -case 1 :/* link incident*/ -CIO_CRW_EVENT (4 ,"chsc_process_crw: " -"channel subsystem reports link incident," -" reporting source is chpid %x\n" , - sei_area->rsid); - chpid =__get_chpid_from_lir (sei_area->ccdf); -if (chpid <0 ) -CIO_CRW_EVENT (4 ,"%s: Invalid LIR, skipping\n" , - __FUNCTION__); -else -s390_set_chpid_offline (chpid); -break ; - -case 2 :/* i/o resource accessibiliy */ -CIO_CRW_EVENT (4 ,"chsc_process_crw: " -"channel subsystem reports some I/O " -"devices may have become accessible\n" ); -pr_debug ("Data received after sei: \n" ); -pr_debug ("Validity flags: %x\n" , sei_area->vf); - -/* allocate a new channel path structure, if needed */ - status =get_chp_status (sei_area->rsid); -if (status <0 ) -new_channel_path (sei_area->rsid); -else if (!status) -break ; - dev =get_device (&css[0 ]->chps[sei_area->rsid]->dev); - res_data.chp =to_channelpath (dev); -pr_debug ("chpid: %x" , sei_area->rsid); -if ((sei_area->vf &0xc0 ) !=0 ) { - res_data.fla = sei_area->fla; -if ((sei_area->vf &0xc0 ) ==0xc0 ) { -pr_debug (" full link addr: %x" , - sei_area->fla); - res_data.fla_mask =0xffff ; - }else { -pr_debug (" link addr: %x" , - sei_area->fla); - res_data.fla_mask =0xff00 ; - } - } - ret =s390_process_res_acc (&res_data); -pr_debug ("\n\n" ); -put_device (dev); -break ; - -default :/* other stuff */ -CIO_CRW_EVENT (4 ,"chsc_process_crw: event %d\n" , - sei_area->cc); + ret =0 ;break ; } }while (sei_area->flags &0x80 ); +return ret; }