Skip to contentSkip to conversation

wistron button support for fujitsu-siemens Amilo D88x0

PATCH In review Michael Leun 4 participants 10 messages Feb 5, 2007 – Feb 7, 2007

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 wistron button support for fujitsu-siemens Amilo D88x0

Hello,

works just fine for me on a Amilo D8820.

wistron_btns.c renamed from wistron_btns.c.orig +20 -0
@@ -306,6 +306,17 @@
 	{ KE_END, 0 }
 };
 
+static struct key_entry keymap_fs_amilo_d88x0[] = {
+	{ KE_KEY, 0x01, KEY_HELP },
+	{ KE_KEY, 0x08, KEY_MUTE },
+	{ KE_KEY, 0x31, KEY_MAIL },
+	{ KE_KEY, 0x36, KEY_WWW },
+	{ KE_KEY, 0x11, KEY_PROG1 },
+	{ KE_KEY, 0x12, KEY_PROG2 },
+	{ KE_KEY, 0x13, KEY_PROG3 },
+	{ KE_END, 0 }
+};
+
 /*
  * If your machine is not here (which is currently rather likely), please send
  * a list of buttons and their key codes (reported when loading this module
@@ -339,6 +350,15 @@
 		},
 		.driver_data = keymap_acer_travelmate_240
 	},
+	{
+		.callback = dmi_matched,
+		.ident = "Fujitsu Siemens Amilo D88x0",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO D"),
+		},
+		.driver_data = keymap_fs_amilo_d88x0
+	},
 	{ NULL, }
 };
 
# dmidecode 2.8
SMBIOS 2.31 present.
35 structures occupying 1157 bytes.
Table at 0x000E8E30.

Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Phoenix Technologies LTD
Version: R01-A1F
Release Date: 06/02/2003
Address: 0xE29D0
Runtime Size: 120368 bytes
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed ESCD support is available Boot from CD is supported ACPI is supported
USB legacy is supported
AGP is supported
Smart battery is supported BIOS boot specification is supported

Handle 0x0001, DMI type 1, 25 bytes System Information

	Manufacturer: FUJITSU SIEMENS
	Product Name: AMILO D        
	Version: -1             
	Serial Number: 1234567890                    
	UUID: EEB04FA0-09C4-11D8-B9F5-EE823498EF08
	Wake-up Type: Power Switch

Handle 0x0002, DMI type 2, 8 bytes Base Board Information
Manufacturer: FUJITSU SIEMENS Product Name: AMILO D
Version: Rev.SB
Serial Number: None

Handle 0x0003, DMI type 3, 17 bytes Chassis Information
Manufacturer: FUJITSU SIEMENS
Type: Notebook
Lock: Not Present
Version: N/A
Serial Number: 1234567890123 Asset Tag: ABCDEFGHIJKLM Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00001234

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: U1
Type: Central Processor
Family: Pentium 4
Manufacturer: GenuineIntel
ID: 27 0F 00 00 FF F9 EB BF
Signature: Type 0, Family 15, Model 2, Stepping 7 Flags:
FPU (Floating-point unit on-chip) VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension) MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported) SEP (Fast system call)
MTRR (Memory type range registers) PGE (Page global enable)
MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table)
PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Pentium(
Voltage: 1.3 V
External Clock: Unknown
Max Speed: 2400 MHz
Current Speed: 2800 MHz
Status: Populated, Enabled
Upgrade: Slot 1
L1 Cache Handle: 0x0008
L2 Cache Handle: 0x0009
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified

Handle 0x0005, DMI type 5, 20 bytes Memory Controller Information
Error Detecting Method: None Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 512 MB Maximum Total Memory Size: 1024 MB Supported Speeds:
70 ns
60 ns
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V Associated Memory Slots: 2
0x0006
0x0007
Enabled Error Correcting Capabilities:
Unknown

Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: M1
Bank Connections: 0 1
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK

Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: M2
Bank Connections: 2 3
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK

Handle 0x0008, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1 Operational Mode: Write Back
Location: Internal
Installed Size: 20 KB
Maximum Size: 20 KB
Supported SRAM Types:
Burst
Pipeline Burst Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: None System Type: Other
Associativity: Other

Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Single-bit ECC System Type: Unified
Associativity: Other

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: Serial 1 External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN3
Internal Connector Type: 25 Pin Dual Inline (pin 26 cut) External Reference Designator: Parallel External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN1 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: PS/2 Port Type: Keyboard Port

Handle 0x000D, DMI type 8, 9 bytes Port Connector Information
Internal Reference Designator: CN1 Internal Connector Type: None External Reference Designator: Mouse External Connector Type: PS/2 Port Type: Mouse Port

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN5 Internal Connector Type: None External Reference Designator: USB External Connector Type: Access Bus (USB) Port Type: USB

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN6 Internal Connector Type: None External Reference Designator: USB External Connector Type: Access Bus (USB) Port Type: USB

Handle 0x0010, DMI type 8, 9 bytes Port Connector Information
Internal Reference Designator: CN26 Internal Connector Type: None External Reference Designator: MODEM External Connector Type: RJ-11 Port Type: Modem Port

Handle 0x0011, DMI type 8, 9 bytes Port Connector Information
Internal Reference Designator: U49 Internal Connector Type: None External Reference Designator: LAN External Connector Type: RJ-45 Port Type: Network Port

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN24 Internal Connector Type: None
External Reference Designator: LINE-IN JACK External Connector Type: Mini Jack (headphones) Port Type: Audio Port

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN24 Internal Connector Type: None
External Reference Designator: HEADPHONE-OUT JACK External Connector Type: Mini Jack (headphones) Port Type: Audio Port

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN2 Internal Connector Type: None
External Reference Designator: EXTERNAL DISPLAY External Connector Type: DB-15 female Port Type: Video Port

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN2 Internal Connector Type: None External Reference Designator: IEEE 1394 External Connector Type: IEEE 1394 Port Type: Firewire (IEEE P1394)

Handle 0x0016, DMI type 9, 13 bytes System Slot Information
Designation: CARDBUS A
Type: 32-bit PC Card (PCMCIA) Current Usage: Available
Length: Other
ID: Adapter 0, Socket 1 Characteristics:
5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported PME signal is supported

Handle 0x0017, DMI type 9, 13 bytes System Slot Information
Designation: CARDBUS B
Type: 32-bit PC Card (PCMCIA) Current Usage: Available
Length: Other
ID: Adapter 0, Socket 2 Characteristics:
5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported PME signal is supported

Handle 0x0018, DMI type 10, 8 bytes On Board Device 1 Information
Type: Video
Status: Enabled
Description: ATI M9000
On Board Device 2 Information
Type: Sound
Status: Enabled
Description: SIS 7012

Handle 0x0019, DMI type 11, 5 bytes OEM Strings

	String 1: 1
	String 2: 1234567890

Handle 0x001A, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.

Handle 0x001B, DMI type 16, 15 bytes Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None Maximum Capacity: 1 GB
Error Information Handle: Not Provided Number Of Devices: 2

Handle 0x001C, DMI type 17, 27 bytes Memory Device
Array Handle: 0x001B
Error Information Handle: Not Provided Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 2
Locator: M1
Bank Locator: Bank 0
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified
Part Number: Not Specified

Handle 0x001D, DMI type 17, 27 bytes Memory Device
Array Handle: 0x001B
Error Information Handle: Not Provided Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 2
Locator: M2
Bank Locator: Bank 1
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified
Part Number: Not Specified

Handle 0x001E, DMI type 19, 15 bytes Memory Array Mapped Address

	Starting Address: 0x00000000000
	Ending Address: 0x0007FFFFFFF
	Range Size: 2 GB
	Physical Array Handle: 0x001B
	Partition Width: 0

Handle 0x001F, DMI type 20, 19 bytes Memory Device Mapped Address

	Starting Address: 0x00000000000
	Ending Address: 0x0003FFFFFFF
	Range Size: 1 GB
	Physical Device Handle: 0x001C
	Memory Array Mapped Address Handle: 0x001E
	Partition Row Position: 1

Handle 0x0020, DMI type 20, 19 bytes Memory Device Mapped Address

	Starting Address: 0x00040000000
	Ending Address: 0x0007FFFFFFF
	Range Size: 1 GB
	Physical Device Handle: 0x001D
	Memory Array Mapped Address Handle: 0x001E
	Partition Row Position: 1

Handle 0x0021, DMI type 32, 20 bytes System Boot Information
Status: <OUT OF SPEC>

Handle 0x0022, DMI type 127, 4 bytes End Of Table

Signature · 3 lines
MfG,

Michael Leun
#1 lore raw
Quoted 4 lines · On Mon, 5 Feb 2007 10:35:21 +0100 Michael Leun <[email protected]> wrote:

Hello,

works just fine for me on a Amilo D8820.

Posted old version of patch...

--- linux-2.6.20/drivers/input/misc/wistron_btns.c.orig

2007-02-04 19:44:54.000000000 +0100 +++

linux-2.6.20/drivers/input/misc/wistron_btns.c 2007-02-05
10:05:47.000000000 +0100 @@ -335,6 +335,17 @@ { KE_END, 0 },
};

+static struct key_entry keymap_fs_amilo_d88x0[] = {
+ { KE_KEY, 0x01, KEY_HELP },
+ { KE_KEY, 0x08, KEY_MUTE },
+ { KE_KEY, 0x31, KEY_MAIL },
+ { KE_KEY, 0x36, KEY_WWW },
+ { KE_KEY, 0x11, KEY_PROG1 },
+ { KE_KEY, 0x12, KEY_PROG2 },
+ { KE_KEY, 0x13, KEY_PROG3 },
+ { KE_END, 0 }
+};
+
/*
* If your machine is not here (which is currently rather likely),
please send
* a list of buttons and their key codes (reported when loading this
module @@ -413,6 +424,15 @@
},
.driver_data = keymap_wistron_ms2111
},
+ {
+ .callback = dmi_matched,
+ .ident = "Fujitsu Siemens Amilo D88x0",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO D"),
+ },
+ .driver_data = keymap_fs_amilo_d88x0
+ },
{ NULL, }
};

Signature · 3 lines
MfG,

Michael Leun
maintainer
#2 lore raw
Quoted 8 lines · Michael Leun
Quoted 4 lines · On Mon, 5 Feb 2007 10:35:21 +0100 Michael Leun <[email protected]> wrote:

Hello,

works just fine for me on a Amilo D8820.

Michael,

Could you please resend your patch with "Signed-off-by: ..." line and I will apply it.

Thanks!

Signature · 1 line
Dmitry
#3 lore raw

Hello Dmitry,

Quoted 2 lines · On Tue, 6 Feb 2007 11:37:44 -0500 "Dmitry Torokhov"…

Could you please resend your patch with "Signed-off-by: ..." line and I will apply it.

Yes, of course.

Wistron button support for fujitsu-siemens Amilo D88x0 - works just fine for me on a Amilo D8820.

drivers/input/misc/wistron_btns.c renamed from drivers/input/misc/wistron_btns.c.orig +20 -0
@@ -335,6 +335,17 @@
 	{ KE_END,  0 },
 };
 
+static struct key_entry keymap_fs_amilo_d88x0[] = {
+	{ KE_KEY, 0x01, KEY_HELP },
+	{ KE_KEY, 0x08, KEY_MUTE },
+	{ KE_KEY, 0x31, KEY_MAIL },
+	{ KE_KEY, 0x36, KEY_WWW },
+	{ KE_KEY, 0x11, KEY_PROG1 },
+	{ KE_KEY, 0x12, KEY_PROG2 },
+	{ KE_KEY, 0x13, KEY_PROG3 },
+	{ KE_END, 0 }
+};
+
 /*
  * If your machine is not here (which is currently rather likely), please send
  * a list of buttons and their key codes (reported when loading this module
@@ -413,6 +424,15 @@
 		},
 		.driver_data = keymap_wistron_ms2111
 	},
+	{
+		.callback = dmi_matched,
+		.ident = "Fujitsu Siemens Amilo D88x0",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO D"),
+		},
+		.driver_data = keymap_fs_amilo_d88x0
+	},
 	{ NULL, }
 };
 
Signature · 3 lines
MfG,

Michael Leun
#4 lore raw
Quoted 2 lines · Michael Leun

Wistron button support for fujitsu-siemens Amilo D88x0 - works just fine for me on a Amilo D8820.

Hm. Is there really no PNP id that tends to be associated with this wistron hardware? Fujitsu (at least) seem to be quite good at exposing a lot of their magic hardware that way.

Signature · 1 line
Matthew Garrett | [email protected]
#5 lore raw

Hello,

Quoted 6 lines · On Tue, 6 Feb 2007 20:07:49 +0000 Matthew Garrett <[email protected]> wrote:
Quoted 2 lines

Wistron button support for fujitsu-siemens Amilo D88x0 - works just fine for me on a Amilo D8820.

Hm. Is there really no PNP id that tends to be associated with this wistron hardware? Fujitsu (at least) seem to be quite good at exposing a lot of their magic hardware that way.

Sorry, I do not know and I do not know how to find out. If there is any testing I should do on my machine I will happily do that, but you would have to tell me what to do.

Signature · 3 lines
MfG,

Michael Leun
#6 lore raw
Quoted 9 lines · Michael Leun
Quoted 3 lines · On Tue, 6 Feb 2007 20:07:49 +0000 Matthew Garrett <[email protected]> wrote:

Hm. Is there really no PNP id that tends to be associated with this wistron hardware? Fujitsu (at least) seem to be quite good at exposing a lot of their magic hardware that way.

Sorry, I do not know and I do not know how to find out. If there is any testing I should do on my machine I will happily do that, but you would have to tell me what to do.

cat /sys/bus/pnp/devices/*/id should give a list of the available IDs.

Signature · 1 line
Matthew Garrett | [email protected]
#7 lore raw
Quoted 11 lines · On Wed, 7 Feb 2007 09:58:07 +0000 Matthew Garrett <[email protected]> wrote:
Quoted 8 lines · Michael Leun
Quoted 3 lines · Matthew Garrett

Hm. Is there really no PNP id that tends to be associated with this wistron hardware? Fujitsu (at least) seem to be quite good at exposing a lot of their magic hardware that way.

Sorry, I do not know and I do not know how to find out. If there is any testing I should do on my machine I will happily do that, but you would have to tell me what to do.

cat /sys/bus/pnp/devices/*/id should give a list of the available IDs.

ml@xenia:~> cat /sys/bus/pnp/devices/*/id
PNP0a03
PNP0200
PNP0b00
PNP0800
PNP0c02
PNP0c04
PNP0303
PNP0f13
PNP0700
PNP0400
PNP0501

OK, it does, but what to do with them?

Looking around there shows that some of them cover kbd, psaux, parport, and serial.

ml@xenia:/sys/bus/pnp/devices> for i in *; do ls -l $i/; done insgesamt 0

-r--r--r-- 1 root root 4096  7. Feb 11:27 id
-r--r--r-- 1 root root 4096  7. Feb 11:27 options
drwxr-xr-x 2 root root    0  7. Feb 11:28 power
-rw-r--r-- 1 root root 4096  7. Feb 11:27 resources
lrwxrwxrwx 1 root root    0  7. Feb 11:27 subsystem -> ../../../bus/pnp
--w------- 1 root root 4096  7. Feb 11:27 uevent
insgesamt 0
-r--r--r-- 1 root root 4096  7. Feb 11:27 id
-r--r--r-- 1 root root 4096  7. Feb 11:28 options
drwxr-xr-x 2 root root    0  7. Feb 11:28 power
-rw-r--r-- 1 root root 4096  7. Feb 11:28 resources
lrwxrwxrwx 1 root root    0  7. Feb 11:28 subsystem -> ../../../bus/pnp
--w------- 1 root root 4096  7. Feb 11:28 uevent
insgesamt 0
-r--r--r-- 1 root root 4096  7. Feb 11:27 id
-r--r--r-- 1 root root 4096  7. Feb 11:28 options
drwxr-xr-x 2 root root    0  7. Feb 11:28 power
-rw-r--r-- 1 root root 4096  7. Feb 11:28 resources
lrwxrwxrwx 1 root root    0  7. Feb 11:28 subsystem -> ../../../bus/pnp
--w------- 1 root root 4096  7. Feb 11:28 uevent
insgesamt 0
-r--r--r-- 1 root root 4096  7. Feb 11:27 id
-r--r--r-- 1 root root 4096  7. Feb 11:28 options
drwxr-xr-x 2 root root    0  7. Feb 11:28 power
-rw-r--r-- 1 root root 4096  7. Feb 11:28 resources
lrwxrwxrwx 1 root root    0  7. Feb 11:28 subsystem -> ../../../bus/pnp
--w------- 1 root root 4096  7. Feb 11:28 uevent
insgesamt 0
lrwxrwxrwx 1 root root    0  7. Feb 11:28 driver -> ../../../bus/pnp/drivers/system
-r--r--r-- 1 root root 4096  7. Feb 11:27 id
-r--r--r-- 1 root root 4096  7. Feb 11:28 options
drwxr-xr-x 2 root root    0  7. Feb 11:28 power
-rw-r--r-- 1 root root 4096  7. Feb 11:28 resources
lrwxrwxrwx 1 root root    0  7. Feb 11:28 subsystem -> ../../../bus/pnp
--w------- 1 root root 4096  7. Feb 11:28 uevent
insgesamt 0
-r--r--r-- 1 root root 4096  7. Feb 11:27 id
-r--r--r-- 1 root root 4096  7. Feb 11:28 options
drwxr-xr-x 2 root root    0  7. Feb 11:28 power
-rw-r--r-- 1 root root 4096  7. Feb 11:28 resources
lrwxrwxrwx 1 root root    0  7. Feb 11:28 subsystem -> ../../../bus/pnp
--w------- 1 root root 4096  7. Feb 11:28 uevent
insgesamt 0
lrwxrwxrwx 1 root root    0  7. Feb 11:28 driver -> ../../../bus/pnp/drivers/i8042 kbd
-r--r--r-- 1 root root 4096  7. Feb 11:27 id
-r--r--r-- 1 root root 4096  7. Feb 11:28 options
drwxr-xr-x 2 root root    0  7. Feb 11:28 power
-rw-r--r-- 1 root root 4096  7. Feb 11:28 resources
lrwxrwxrwx 1 root root    0  7. Feb 11:28 subsystem -> ../../../bus/pnp
--w------- 1 root root 4096  7. Feb 11:28 uevent
insgesamt 0
lrwxrwxrwx 1 root root    0  7. Feb 11:28 driver -> ../../../bus/pnp/drivers/i8042 aux
-r--r--r-- 1 root root 4096  7. Feb 11:27 id
-r--r--r-- 1 root root 4096  7. Feb 11:28 options
drwxr-xr-x 2 root root    0  7. Feb 11:28 power
-rw-r--r-- 1 root root 4096  7. Feb 11:28 resources
lrwxrwxrwx 1 root root    0  7. Feb 11:28 subsystem -> ../../../bus/pnp
--w------- 1 root root 4096  7. Feb 11:28 uevent
insgesamt 0
-r--r--r-- 1 root root 4096  7. Feb 11:27 id
-r--r--r-- 1 root root 4096  7. Feb 11:28 options
drwxr-xr-x 2 root root    0  7. Feb 11:28 power
-rw-r--r-- 1 root root 4096  7. Feb 11:28 resources
lrwxrwxrwx 1 root root    0  7. Feb 11:28 subsystem -> ../../../bus/pnp
--w------- 1 root root 4096  7. Feb 11:28 uevent
insgesamt 0
lrwxrwxrwx 1 root root    0  7. Feb 11:28 driver -> ../../../bus/pnp/drivers/parport_pc
-r--r--r-- 1 root root 4096  7. Feb 11:27 id
-r--r--r-- 1 root root 4096  7. Feb 11:28 options
drwxr-xr-x 2 root root    0  7. Feb 11:28 power
-rw-r--r-- 1 root root 4096  7. Feb 11:28 resources
lrwxrwxrwx 1 root root    0  7. Feb 11:28 subsystem -> ../../../bus/pnp
--w------- 1 root root 4096  7. Feb 11:28 uevent
insgesamt 0
lrwxrwxrwx 1 root root    0  7. Feb 11:28 driver -> ../../../bus/pnp/drivers/serial
-r--r--r-- 1 root root 4096  7. Feb 11:27 id
-r--r--r-- 1 root root 4096  7. Feb 11:28 options
drwxr-xr-x 2 root root    0  7. Feb 11:28 power
-rw-r--r-- 1 root root 4096  7. Feb 11:28 resources
lrwxrwxrwx 1 root root    0  7. Feb 11:28 subsystem -> ../../../bus/pnp
drwxr-xr-x 3 root root    0  7. Feb 11:28 ttyS0
--w------- 1 root root 4096  7. Feb 11:28 uevent
Signature · 3 lines
MfG,

Michael Leun
#8 lore raw
Quoted 4 lines · Michael Leun

ml@xenia:~> cat /sys/bus/pnp/devices/*/id
PNP0a03
PNP0200
PNP0b00

Quoted 8 lines

PNP0800
PNP0c02
PNP0c04
PNP0303
PNP0f13
PNP0700
PNP0400
PNP0501

Hmm, yeah, none of those seem useful. Shame.

Signature · 1 line
Matthew Garrett | [email protected]
#9 lore raw
In reply to Michael Leun
Quoted 9 lines · Michael Leun
Quoted 6 lines · On Wed, 7 Feb 2007 09:58:07 +0000 Matthew Garrett <[email protected]> wrote:
Quoted 5 lines · Michael Leun
Quoted 3 lines · Matthew Garrett

Hm. Is there really no PNP id that tends to be associated with this wistron hardware? Fujitsu (at least) seem to be quite good at exposing a lot of their magic hardware that way.

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

Sorry, I do not know and I do not know how to find out. If there is any testing I should do on my machine I will happily do that, but you would have to tell me what to do.

cat /sys/bus/pnp/devices/*/id should give a list of the available IDs.

ml@xenia:~> cat /sys/bus/pnp/devices/*/id

This list doesn't look promising.

PNP0a03 - PCI bus
PNP0200 - AT DMA controller
PNP0b00 - AT real-time clock
PNP0800 - AT-style speaker sound
PNP0c02 - Motherboard resources
PNP0c04 - Math coprocessor
PNP0303 - IBM enhanced keyboard (101/102-key, PS/2 mouse support) PNP0f13 - PS/2 port for PS/2-style mice
PNP0700 - PC standard floppy disk controller
PNP0400 - Standard LPT printer port
PNP0501 - 16550A-compatible COM port

Signature · 2 lines
Andrey Panin		| Linux and UNIX system administrator
[email protected]		| PGP key: wwwkeys.pgp.net