Skip to contentSkip to conversation

s2ram autowake regression is still there in 2.6.21-rc4-git

DISCUSSION Pavel Machek 2 participants 3 messages Mar 20, 2007

lore
Share & tools
lore
#0 lore raw

Hi!

Run this script. The s2ram at the end of it will wakeup immediately after going to sleep, bad. I tried reproducing it with smaller version, but was not too successful.
Pavel

#!/bin/bash
killall klogd

echo -n "testing refrigerator (testproc)..."
echo testproc > /sys/power/disk
echo disk > /sys/power/state
echo "okay"

sleep 2
echo -n "testing drivers (test)..."
echo test > /sys/power/disk
echo disk > /sys/power/state
echo "okay"

sleep 2
echo -n "testing swsusp (reboot)..."
echo reboot > /sys/power/disk
echo disk > /sys/power/state
echo "okay"

sleep 2
echo -n "testing s2ram..."
s2ram
echo "okay"

sleep 2
echo -n "testing swsusp (shutdown)..."
echo shutdown > /sys/power/disk
echo disk > /sys/power/state
echo "okay"

sleep 2
echo -n "testing swsusp (platform)..."
echo platform > /sys/power/disk
echo disk > /sys/power/state
echo "okay"

sleep 2
echo -n "testing s2ram..."
s2ram
echo "okay"

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#1 lore raw

Hi!

Quoted 3 lines

Run this script. The s2ram at the end of it will wakeup immediately after going to sleep, bad. I tried reproducing it with smaller version, but was not too successful.

Actually

Quoted 10 lines

sleep 2
echo -n "testing swsusp (platform)..."
echo platform > /sys/power/disk
echo disk > /sys/power/state
echo "okay"

sleep 2
echo -n "testing s2ram..."
s2ram
echo "okay"

...this is enough to trigger it. I've done my testing on x60, FWIW.

Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#2 lore raw
Quoted 14 lines · Pavel Machek

Hi!

Quoted 3 lines

Run this script. The s2ram at the end of it will wakeup immediately after going to sleep, bad. I tried reproducing it with smaller version, but was not too successful.

Actually

Quoted 6 lines

sleep 2
echo -n "testing swsusp (platform)..."
echo platform > /sys/power/disk
echo disk > /sys/power/state
echo "okay"

Quoted 6 lines
Quoted 4 lines

sleep 2
echo -n "testing s2ram..."
s2ram
echo "okay"

...this is enough to trigger it. I've done my testing on x60, FWIW.

Please try the consolidated ACPI patch that is currently staged for release to upstream:
http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6.21/acpi-release-20070126-2.6.21-rc4.diff.gz
comming soon to a mirror near you:-)

thanks,
-Len