Logitech diNovo Desktop: keyboard keys and Mouse buttons
Hello all,
I have a logitech diNovo desktop and connect it directly to my bluetooth adapter in my laptop. I noticed that the F11, F12 and the Refresh button do not work and are not reported by xev. However, hciconfig shows an increase in the RX bytes and acl counters. Does this mean that the keyboard transmits data to the computer? I want to find out if the keyboard is transmitting a keycode, can someone point me to some resources that tell me how to listen in on the traffic.
I have a similar issue with the mouse buttons, i.e. that they report the same buttons to xev and an evtest program. I want to figure out how to see what the mouse is actually reporting.
Thanks you,
Christoph Burger-Scheidlin
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Christoph,
Quoted 11 lines
I have a logitech diNovo desktop and connect it directly to my bluetooth adapter in my laptop. I noticed that the F11, F12 and the Refresh button do not work and are not reported by xev. However, hciconfig shows an increase in the RX bytes and acl counters. Does this mean that the keyboard transmits data to the computer? I want to find out if the keyboard is transmitting a keycode, can someone point me to some resources that tell me how to listen in on the traffic.
I have a similar issue with the mouse buttons, i.e. that they report the same buttons to xev and an evtest program. I want to figure out how to see what the mouse is actually reporting.
when you call hidd and it shows boot-protocol, then this is no wonder. You need a Linux kernel with HID report mode enabled HIDP module. You might wanna try the latest 2.6.21-rc5 kernel.
Regards
Marcel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Quoted 6 lines · Marcel Holtmann
Quoted 2 lines
[Logitech diNovo Keyboard does not report Fn+F11, Fn+F12 and Refresh to xev, the mouse does not report all buttons]
when you call hidd and it shows boot-protocol, then this is no wonder. You need a Linux kernel with HID report mode enabled HIDP module. You might wanna try the latest 2.6.21-rc5 kernel.
Currently I am running 2.6.20 (with Ubuntu patches) with the mh1 patch applied to it. I am not sure, if the keyboard is in boot-protocol mode. The syslog message is:
hidd[3632]: New HID device 00:07:61:3C:31:3C (Logitech Bluetooth Keyboard),
hidd reports:
00:07:61:3C:31:3C Logitech Bluetooth Keyboard [046d:b307] connected
Since my original email, I have figured out that the mouse problem is mainly due to using the /dev/input/mice interface, however, even when switching to evdev, the buttons above and below my scroll wheel do report the same button press (button 4 and 5 respectively).
I have attached dumps made with hcidump of the traffic of all my mouse buttons and of the keys that are not working in the hope that this information is useful.
Christoph
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Christoph,
Quoted 16 lines
Quoted 6 lines
Quoted 2 lines
[Logitech diNovo Keyboard does not report Fn+F11, Fn+F12 and Refresh to xev, the mouse does not report all buttons]
when you call hidd and it shows boot-protocol, then this is no wonder. You need a Linux kernel with HID report mode enabled HIDP module. You might wanna try the latest 2.6.21-rc5 kernel.
Currently I am running 2.6.20 (with Ubuntu patches) with the mh1 patch applied to it. I am not sure, if the keyboard is in boot-protocol mode. The syslog message is:
hidd[3632]: New HID device 00:07:61:3C:31:3C (Logitech Bluetooth Keyboard),
hidd reports:
00:07:61:3C:31:3C Logitech Bluetooth Keyboard [046d:b307] connected
Quoted 8 lines
Since my original email, I have figured out that the mouse problem is mainly due to using the
/dev/input/miceinterface, however, even when switching to evdev, the buttons above and below my scroll wheel do report the same button press (button 4 and 5 respectively).I have attached dumps made with hcidump of the traffic of all my mouse buttons and of the keys that are not working in the hope that this information is useful.
the binary dumps are not really useful. Make them with "hcidump -X -V" and copy only the text into an email with comments.
However it looks like you are using the HID report mode and so any non interpreted key code is a problem of the HID subsystem. This means that this email actually should be send to LKML. To make sense out of it you have to include the HID descriptor. Use sdptool to get it.
Regards
Marcel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users