PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses')
Hi,
dmesg told me to report this to LKML.
Have a nice day..
dmesg-with-assign-busses renamed from dmesg-without-assign-busses +4 -7
@@ -43,9 +43,9 @@ ACPI: DSDT (v001 ACER TM290 0x00000006 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 20000000 (gap: 1f000000:e0b80000) -Detected 1398.876 MHz processor. +Detected 1398.857 MHz processor. Built 1 zonelists. Total pages: 125969 -Kernel command line: BOOT_IMAGE=2.6.20.4 ro root=301 lapic video=intelb acpi_serialize +Kernel command line: BOOT_IMAGE=2.6.20.4 ro root=301 lapic video=intelb acpi_serialize pci=assign-busses ACPI: serialize enabled Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC!
@@ -67,7 +67,7 @@ .data : 0xc03f9a69 - 0xc05282e0 (1210 kB) .text : 0xc0100000 - 0xc03f9a69 (3046 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. -Calibrating delay using timer specific routine.. 2799.36 BogoMIPS (lpj=5598724) +Calibrating delay using timer specific routine.. 2799.36 BogoMIPS (lpj=5598732) Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K
@@ -96,8 +96,6 @@ 0000:00:1f.1: trying to change BAR2 from 0000 to 0170 0000:00:1f.1: trying to change BAR3 from 0000 to 0374 PCI: Transparent bridge - 0000:00:1e.0 -PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses') -Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
@@ -229,9 +227,8 @@ Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:01:04.0, mfunc 0x00111c12, devctl 0x46 -Yenta: ISA IRQ mask 0x0848, PCI irq 10 +Yenta: ISA IRQ mask 0x0840, PCI irq 10 Socket status: 30000006 -Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05 pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff pcmcia: parent PCI bridge Memory window: 0xa0000000 - 0xafffffff
Linux version 2.6.20.4 (root@geek) (gcc version 4.1.2) #1 Sat Mar 31 17:55:27 CEST 2007 BIOS-provided physical RAM map:
sanitize start
sanitize endcopy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAMcopy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001eef0000 end: 000000001eff0000 type: 1 copy_e820_map() type is E820_RAMcopy_e820_map() start: 000000001eff0000 size: 000000000000ffc0 end: 000000001effffc0 type: 3 copy_e820_map() start: 000000001effffc0 size: 0000000000000040 end: 000000001f000000 type: 4 copy_e820_map() start: 00000000ffb80000 size: 0000000000080000 end: 00000000ffc00000 type: 2 copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001eff0000 (usable)
BIOS-e820: 000000001eff0000 - 000000001effffc0 (ACPI data)
BIOS-e820: 000000001effffc0 - 000000001f000000 (ACPI NVS)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
495MB LOWMEM available.
Entering add_active_range(0, 0, 126960) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 126960
early_node_map[1] active PFN ranges
0: 0 -> 126960
On node 0 totalpages: 126960
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 959 pages used for memmap
Normal zone: 121905 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 OID_00 ) @ 0x000e6010
ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x1effa5b0
ACPI: FADT (v001 COMPAL DCL51_00 0x00000100 _CSI 0x00010101) @ 0x1efffb00
ACPI: BOOT (v001 INSYDE BOOT_000 0x00000001 _CSI 0x00010101) @ 0x1efffb90
ACPI: DBGP (v001 INSYDE DBGP_000 0x00000001 _CSI 0x00010101) @ 0x1efffbc0
ACPI: SSDT (v001 INSYDE GV3Ref 0x00002000 INTL 0x20021002) @ 0x1effa5f0
ACPI: DSDT (v001 ACER TM290 0x00000006 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 20000000 (gap: 1f000000:e0b80000)
Detected 1398.857 MHz processor.
Built 1 zonelists. Total pages: 125969
Kernel command line: BOOT_IMAGE=2.6.20.4 ro root=301 lapic video=intelb acpi_serialize pci=assign-busses
ACPI: serialize enabled
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0561000 soft=c0560000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 498060k/507840k available (3046k kernel code, 9228k reserved, 1210k data, 196k init, 0k highmem) virtual kernel memory layout:
fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
vmalloc : 0xdf800000 - 0xfffb5000 ( 519 MB)
lowmem : 0xc0000000 - 0xdeff0000 ( 495 MB)
.init : 0xc052a000 - 0xc055b000 ( 196 kB)
.data : 0xc03f9a69 - 0xc05282e0 (1210 kB)
.text : 0xc0100000 - 0xc03f9a69 (3046 kB)Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2799.36 BogoMIPS (lpj=5598732)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00002040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
Checking 'hlt' instruction... OK.
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe9824, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1300-133f claimed by ICH4 GPIO
0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
0000:00:1f.1: trying to change BAR2 from 0000 to 0170
0000:00:1f.1: trying to change BAR3 from 0000 to 0374
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *5
ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 23
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[e0001800-e0001fff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 2, cardbus bridge: 0000:01:04.0
IO window: 0000c400-0000c4ff
IO window: 0000c800-0000c8ff
PREFETCH window: a0000000-a3ffffff
MEM window: e4000000-e7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: c000-dfff
MEM window: e0000000-efffffff
PREFETCH window: a0000000-afffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x37 set to 0x80
Machine check exception polling timer started.
Installing knfsd (copyright (C) 1996 [email protected]).
NTFS driver 2.1.28 [Flags: R/O].
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
Using specific hotkey driver
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Detected 16252K stolen memory.
agpgart: AGP aperture is 128M @ 0xb0000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[drm] Initialized i915 1.6.0 20060119 on minor 0
PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
[drm] Initialized i915 1.6.0 20060119 on minor 1
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
intelfb: 00:02.0: Intel(R) 855GM, aperture size 128MB, stolen memory 16252kB
intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
intelfb: Initial video mode is 1024x768-16@60.
intelfb: Changing the video mode is not supported.
Console: switching to colour frame buffer device 128x48
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0xc000, 00:02:3f:13:30:7d, IRQ 10
eth0: Identified 8139 chip type 'RTL-8101'
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pioProbing IDE interface ide0...
hda: TOSHIBA MK4025GAS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f4244000e8b]
hdc: Slimtype COMBO LSC-24082K, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ieee1394: raw1394: /dev/raw1394 device initialized
Yenta: CardBus bridge found at 0000:01:04.0 [1025:003d]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:01:04.0, mfunc 0x00111c12, devctl 0x46
Yenta: ISA IRQ mask 0x0840, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff
pcmcia: parent PCI bridge Memory window: 0xa0000000 - 0xafffffff
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64ehci_hcd 0000:00:1d.7: EHCI Host Controllerehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf0080000ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64uhci_hcd 0000:00:1d.0: UHCI Host Controlleruhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.1 to 64uhci_hcd 0000:00:1d.1: UHCI Host Controlleruhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001600
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64uhci_hcd 0000:00:1d.2: UHCI Host Controlleruhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001700
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblpdrivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Microsoft Microsoft IntelliMouse� Explorer as /class/input/input4
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Explorer] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhiddrivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected] Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
input: PS/2 Mouse as /class/input/input5
input: AlpsPS/2 ALPS GlidePoint as /class/input/input6
input: AT Translated Set 2 keyboard as /class/input/input7 intel8x0_measure_ac97_clock: measured 56003 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ALSA device list:
#0: Intel 82801DB-ICH4 with ALC202 at 0xf0080400, irq 10
#1: Intel 82801DB-ICH4 Modem at 0xe300, irq 10nf_conntrack version 0.5.0 (3967 buckets, 31736 max)
IPv4 over IPv4 tunneling driverip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
IrCOMM protocol (Dag Brattli)
Testing NMI watchdog ... OK.
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
Time: acpi_pm clocksource has been installed.
ACPI: (supports S0 S1 S3 S4 S5)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 196k freed
EXT3 FS on hda1, internal journal
Adding 500464k swap on /dev/hda2. Priority:-1 extents:1 across:500464k kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link downADDRCONF(NETDEV_UP): eth0: link is not ready
Linux version 2.6.20.4 (root@geek) (gcc version 4.1.2) #1 Sat Mar 31 17:55:27 CEST 2007 BIOS-provided physical RAM map:
sanitize start
sanitize endcopy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAMcopy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001eef0000 end: 000000001eff0000 type: 1 copy_e820_map() type is E820_RAMcopy_e820_map() start: 000000001eff0000 size: 000000000000ffc0 end: 000000001effffc0 type: 3 copy_e820_map() start: 000000001effffc0 size: 0000000000000040 end: 000000001f000000 type: 4 copy_e820_map() start: 00000000ffb80000 size: 0000000000080000 end: 00000000ffc00000 type: 2 copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001eff0000 (usable)
BIOS-e820: 000000001eff0000 - 000000001effffc0 (ACPI data)
BIOS-e820: 000000001effffc0 - 000000001f000000 (ACPI NVS)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
495MB LOWMEM available.
Entering add_active_range(0, 0, 126960) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 126960
early_node_map[1] active PFN ranges
0: 0 -> 126960
On node 0 totalpages: 126960
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 959 pages used for memmap
Normal zone: 121905 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 OID_00 ) @ 0x000e6010
ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x1effa5b0
ACPI: FADT (v001 COMPAL DCL51_00 0x00000100 _CSI 0x00010101) @ 0x1efffb00
ACPI: BOOT (v001 INSYDE BOOT_000 0x00000001 _CSI 0x00010101) @ 0x1efffb90
ACPI: DBGP (v001 INSYDE DBGP_000 0x00000001 _CSI 0x00010101) @ 0x1efffbc0
ACPI: SSDT (v001 INSYDE GV3Ref 0x00002000 INTL 0x20021002) @ 0x1effa5f0
ACPI: DSDT (v001 ACER TM290 0x00000006 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 20000000 (gap: 1f000000:e0b80000)
Detected 1398.876 MHz processor.
Built 1 zonelists. Total pages: 125969
Kernel command line: BOOT_IMAGE=2.6.20.4 ro root=301 lapic video=intelb acpi_serialize
ACPI: serialize enabled
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0561000 soft=c0560000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 498060k/507840k available (3046k kernel code, 9228k reserved, 1210k data, 196k init, 0k highmem) virtual kernel memory layout:
fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
vmalloc : 0xdf800000 - 0xfffb5000 ( 519 MB)
lowmem : 0xc0000000 - 0xdeff0000 ( 495 MB)
.init : 0xc052a000 - 0xc055b000 ( 196 kB)
.data : 0xc03f9a69 - 0xc05282e0 (1210 kB)
.text : 0xc0100000 - 0xc03f9a69 (3046 kB)Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2799.36 BogoMIPS (lpj=5598724)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00002040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
Checking 'hlt' instruction... OK.
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe9824, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1300-133f claimed by ICH4 GPIO
0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
0000:00:1f.1: trying to change BAR2 from 0000 to 0170
0000:00:1f.1: trying to change BAR3 from 0000 to 0374
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *5
ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 23
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[e0001800-e0001fff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 2, cardbus bridge: 0000:01:04.0
IO window: 0000c400-0000c4ff
IO window: 0000c800-0000c8ff
PREFETCH window: a0000000-a3ffffff
MEM window: e4000000-e7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: c000-dfff
MEM window: e0000000-efffffff
PREFETCH window: a0000000-afffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x37 set to 0x80
Machine check exception polling timer started.
Installing knfsd (copyright (C) 1996 [email protected]).
NTFS driver 2.1.28 [Flags: R/O].
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
Using specific hotkey driver
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Detected 16252K stolen memory.
agpgart: AGP aperture is 128M @ 0xb0000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[drm] Initialized i915 1.6.0 20060119 on minor 0
PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
[drm] Initialized i915 1.6.0 20060119 on minor 1
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
intelfb: 00:02.0: Intel(R) 855GM, aperture size 128MB, stolen memory 16252kB
intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
intelfb: Initial video mode is 1024x768-16@60.
intelfb: Changing the video mode is not supported.
Console: switching to colour frame buffer device 128x48
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0xc000, 00:02:3f:13:30:7d, IRQ 10
eth0: Identified 8139 chip type 'RTL-8101'
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pioProbing IDE interface ide0...
hda: TOSHIBA MK4025GAS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f4244000e8b]
hdc: Slimtype COMBO LSC-24082K, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ieee1394: raw1394: /dev/raw1394 device initialized
Yenta: CardBus bridge found at 0000:01:04.0 [1025:003d]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:01:04.0, mfunc 0x00111c12, devctl 0x46
Yenta: ISA IRQ mask 0x0848, PCI irq 10
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff
pcmcia: parent PCI bridge Memory window: 0xa0000000 - 0xafffffff
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64ehci_hcd 0000:00:1d.7: EHCI Host Controllerehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf0080000ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64uhci_hcd 0000:00:1d.0: UHCI Host Controlleruhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.1 to 64uhci_hcd 0000:00:1d.1: UHCI Host Controlleruhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001600
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64uhci_hcd 0000:00:1d.2: UHCI Host Controlleruhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001700
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblpdrivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Microsoft Microsoft IntelliMouse� Explorer as /class/input/input4
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Explorer] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhiddrivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected] Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
input: PS/2 Mouse as /class/input/input5
input: AlpsPS/2 ALPS GlidePoint as /class/input/input6
input: AT Translated Set 2 keyboard as /class/input/input7 intel8x0_measure_ac97_clock: measured 56003 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ALSA device list:
#0: Intel 82801DB-ICH4 with ALC202 at 0xf0080400, irq 10
#1: Intel 82801DB-ICH4 Modem at 0xe300, irq 10nf_conntrack version 0.5.0 (3967 buckets, 31736 max)
IPv4 over IPv4 tunneling driverip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
IrCOMM protocol (Dag Brattli)
Testing NMI watchdog ... OK.
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
Time: acpi_pm clocksource has been installed.
ACPI: (supports S0 S1 S3 S4 S5)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 196k freed
EXT3 FS on hda1, internal journal
Adding 500464k swap on /dev/hda2. Priority:-1 extents:1 across:500464k kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link downADDRCONF(NETDEV_UP): eth0: link is not ready
lspci-with-assign-busses renamed from lspci-without-assign-busses +3 -3
@@ -23,8 +23,8 @@ 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) Subsystem: Acer Incorporated [ALI] Unknown device 003d Flags: fast devsel - Memory at 20000000 (32-bit, prefetchable) [disabled] [size=128M] - Memory at 28000000 (32-bit, non-prefetchable) [disabled] [size=512K] + Memory at 20000000 (32-bit, prefetchable) [size=128M] + Memory at 28000000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
@@ -105,7 +105,7 @@ 01:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) Subsystem: Intel Corporation Unknown device 2701 - Flags: bus master, medium devsel, latency 128, IRQ 10 + Flags: bus master, medium devsel, latency 128, IRQ 11 Memory at e0000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied>
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, fast devsel, latency 0
Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, fast devsel, latency 0
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, fast devsel, latency 0
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI] Unknown device 003d Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at b0000000 (32-bit, prefetchable) [size=128M] Memory at f0000000 (32-bit, non-prefetchable) [size=512K] I/O ports at e000 [size=8] Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: fast devsel
Memory at 20000000 (32-bit, prefetchable) [size=128M]
Memory at 28000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1200 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1600 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1700 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, medium devsel, latency 0, IRQ 10
Memory at f0080000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=05, sec-latency=32
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: e0000000-efffffff
Prefetchable memory behind bridge: a0000000-afffffff
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI] Unknown device 003d Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at 1100 [size=16] Memory at 28080000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: medium devsel, IRQ 255
I/O ports at 1400 [size=32]
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Unknown device 0021 Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at e100 [size=256] I/O ports at e200 [size=64] Memory at f0080400 (32-bit, non-prefetchable) [size=512] Memory at f0080600 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied>
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at e300 [size=256]
I/O ports at e400 [size=128]
Capabilities: <access denied>
01:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, stepping, medium devsel, latency 128, IRQ 10
Memory at e0001800 (32-bit, non-prefetchable) [size=2K]
I/O ports at c100 [size=128]
Capabilities: <access denied>
01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, medium devsel, latency 128, IRQ 10
I/O ports at c000 [size=256]
Memory at e0001000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
Subsystem: Intel Corporation Unknown device 2701
Flags: bus master, medium devsel, latency 128, IRQ 11
Memory at e0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 003d Flags: bus master, medium devsel, latency 168, IRQ 10 Memory at e0002000 (32-bit, non-prefetchable) [size=4K] Bus: primary=01, secondary=02, subordinate=05, sec-latency=176 Memory window 0: a0000000-a3fff000 (prefetchable) Memory window 1: e4000000-e7fff000 I/O window 0: 0000c400-0000c4ff I/O window 1: 0000c800-0000c8ff 16-bit legacy interface ports at 0001
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, fast devsel, latency 0
Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, fast devsel, latency 0
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, fast devsel, latency 0
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI] Unknown device 003d Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at b0000000 (32-bit, prefetchable) [size=128M] Memory at f0000000 (32-bit, non-prefetchable) [size=512K] I/O ports at e000 [size=8] Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: fast devsel
Memory at 20000000 (32-bit, prefetchable) [disabled] [size=128M] Memory at 28000000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1200 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1600 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1700 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, medium devsel, latency 0, IRQ 10
Memory at f0080000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=05, sec-latency=32
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: e0000000-efffffff
Prefetchable memory behind bridge: a0000000-afffffff
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI] Unknown device 003d Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at 1100 [size=16] Memory at 28080000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: medium devsel, IRQ 255
I/O ports at 1400 [size=32]
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Unknown device 0021 Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at e100 [size=256] I/O ports at e200 [size=64] Memory at f0080400 (32-bit, non-prefetchable) [size=512] Memory at f0080600 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied>
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at e300 [size=256]
I/O ports at e400 [size=128]
Capabilities: <access denied>
01:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, stepping, medium devsel, latency 128, IRQ 10
Memory at e0001800 (32-bit, non-prefetchable) [size=2K]
I/O ports at c100 [size=128]
Capabilities: <access denied>
01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Acer Incorporated [ALI] Unknown device 003d
Flags: bus master, medium devsel, latency 128, IRQ 10
I/O ports at c000 [size=256]
Memory at e0001000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
Subsystem: Intel Corporation Unknown device 2701
Flags: bus master, medium devsel, latency 128, IRQ 10
Memory at e0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 003d Flags: bus master, medium devsel, latency 168, IRQ 10 Memory at e0002000 (32-bit, non-prefetchable) [size=4K] Bus: primary=01, secondary=02, subordinate=05, sec-latency=176 Memory window 0: a0000000-a3fff000 (prefetchable) Memory window 1: e4000000-e7fff000 I/O window 0: 0000c400-0000c4ff I/O window 1: 0000c800-0000c8ff 16-bit legacy interface ports at 0001
Quoted 3 lines · you
Hi,
dmesg told me to report this to LKML.
And here is my report.
Quoted 1 line
Have a nice day..
x 2 ;)
Signature · 1 line
Mihai Donțu
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d0400000-d07fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cff00000 Capabilities: [44] HyperTransport: MSI Mapping Capabilities: [b0] #0d [0000]
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
Capabilities: [100] Advanced Error Reporting
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
Capabilities: [100] Advanced Error Reporting
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at d0800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at d0801000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at d0802000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
Subsystem: Hewlett-Packard Company MX6125
Flags: 66MHz, medium devsel
I/O ports at 8200 [size=16]
Memory at d0803000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at 3010 [size=16] Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if 01 [Subtractive decode])
Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=04, subordinate=08, sec-latency=64 I/O behind bridge: 00001000-00001fff Memory behind bridge: d0000000-d03fffff Prefetchable memory behind bridge: 50000000-53ffffff
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17
Memory at d0804000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company MX6125
Flags: 66MHz, slow devsel, IRQ 17
Memory at d0805000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 64, IRQ 5 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at 2000 [size=256] Memory at d0400000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at d0420000 [disabled] [size=128K] Capabilities: [50] Power Management version 2
04:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 23
Memory at d0000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
04:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, fast devsel, latency 64, IRQ 22
Memory at d0010000 (32-bit, non-prefetchable) [size=8K]
04:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at d0012000 (32-bit, non-prefetchable) [size=4K] Bus: primary=04, secondary=05, subordinate=08, sec-latency=176 Memory window 0: 50000000-53fff000 (prefetchable) Memory window 1: 54000000-57fff000 (prefetchable) I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff 16-bit legacy interface ports at 0001
04:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at d0013000 (32-bit, non-prefetchable) [size=2K]
Memory at d0014000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
04:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at d0018000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
04:04.4 Class 0805: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at d001a000 (32-bit, non-prefetchable) [size=256] Memory at d001b000 (32-bit, non-prefetchable) [size=256] Memory at d001c000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d0400000-d07fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cff00000 Capabilities: [44] HyperTransport: MSI Mapping Capabilities: [b0] #0d [0000]
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
Capabilities: [100] Advanced Error Reporting
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
Capabilities: [100] Advanced Error Reporting
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at d0800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at d0801000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at d0802000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
Subsystem: Hewlett-Packard Company MX6125
Flags: 66MHz, medium devsel
I/O ports at 8200 [size=16]
Memory at d0803000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at 3010 [size=16] Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if 01 [Subtractive decode])
Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=02, subordinate=03, sec-latency=64 I/O behind bridge: 00001000-00001fff Memory behind bridge: d0000000-d03fffff Prefetchable memory behind bridge: 50000000-53ffffff
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17
Memory at d0804000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company MX6125
Flags: 66MHz, slow devsel, IRQ 17
Memory at d0805000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 64, IRQ 5 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at 2000 [size=256] Memory at d0400000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at d0420000 [disabled] [size=128K] Capabilities: [50] Power Management version 2
02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 23
Memory at d0000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
02:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, fast devsel, latency 64, IRQ 22
Memory at d0010000 (32-bit, non-prefetchable) [size=8K]
02:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at d0012000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 50000000-53fff000 (prefetchable) Memory window 1: 54000000-57fff000 (prefetchable) I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff 16-bit legacy interface ports at 0001
02:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at d0013000 (32-bit, non-prefetchable) [size=2K]
Memory at d0014000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
02:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at d0018000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
02:04.4 Class 0805: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at d001a000 (32-bit, non-prefetchable) [size=256] Memory at d001b000 (32-bit, non-prefetchable) [size=256] Memory at d001c000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2
[ 0.000000] Linux version 2.6.21-rc7 (mihai@mdontu-l) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 PREEMPT Mon Apr 23 04:16:33 EEST 2007 [ 0.000000] Command line: vga=791 nohz=on pci=assign-busses [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fd0000 (usable) [ 0.000000] BIOS-e820: 0000000037fd0000 - 0000000037fefc00 (reserved) [ 0.000000] BIOS-e820: 0000000037fefc00 - 0000000037ffb000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037ffb000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 229328) 1 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FE270, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 37FEFC84, 0034 (r1 HP 0944 22110520 HP 1) [ 0.000000] ACPI: FACP 37FEFC00, 0084 (r2 HP 0944 2 HP 1) [ 0.000000] ACPI: DSDT 37FEFD50, 7489 (r1 HP SB400 10000 MSFT 100000E) [ 0.000000] ACPI: FACS 37FFAE80, 0040 [ 0.000000] ACPI: APIC 37FEFCB8, 005A (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: MCFG 37FEFD14, 003C (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: SSDT 37FF71D9, 0382 (r1 HP HPQPpc 1001 MSFT 100000E) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 229328) 1 entries of 256 used [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 229328 [ 0.000000] On node 0 totalpages: 229231 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2012 pages reserved [ 0.000000] DMA zone: 1931 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3079 pages used for memmap [ 0.000000] DMA32 zone: 222153 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfec01000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000 [ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 224084 [ 0.000000] Kernel command line: vga=791 nohz=on pci=assign-busses [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 14.486846] time.c: Detected 2194.539 MHz processor. [ 14.486898] Console: colour dummy device 80x25 [ 14.488383] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 14.489336] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 14.503372] Memory: 894468k/917312k available (4263k kernel code, 22208k reserved, 1795k data, 232k init) [ 14.562723] Calibrating delay using timer specific routine.. 4391.80 BogoMIPS (lpj=2195900) [ 14.562776] Mount-cache hash table entries: 256 [ 14.562916] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 14.562922] CPU: L2 Cache: 1024K (64 bytes/line) [ 14.562936] CPU: AMD Turion(tm) 64 Mobile ML-40 stepping 02 [ 14.562949] ACPI: Core revision 20070126 [ 14.608885] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 14.618890] Using local APIC timer interrupts. [ 14.664403] result 12468973 [ 14.664407] Detected 12.468 MHz APIC timer. [ 14.664719] NET: Registered protocol family 16 [ 14.664805] No dock devices found. [ 14.664874] ACPI: bus type pci registered [ 14.667859] PCI: Using MMCONFIG at e0000000 - efffffff [ 14.667905] PCI: No mmconfig possible on device 00:18 [ 14.681170] ACPI: Interpreter enabled [ 14.681180] ACPI: (supports S0 S3 S4 S5) [ 14.681197] ACPI: Using IOAPIC for interrupt routing [ 14.696539] ACPI: PCI Root Bridge [C047] (0000:00) [ 14.696553] PCI: Probing PCI hardware (bus 00) [ 14.696962] 0000:00:14.1: trying to change BAR0 from 0000 to 01F0 [ 14.696968] 0000:00:14.1: trying to change BAR1 from 0000 to 03F4 [ 14.696973] 0000:00:14.1: trying to change BAR2 from 0000 to 0170 [ 14.696977] 0000:00:14.1: trying to change BAR3 from 0000 to 0374 [ 14.697296] Boot video device is 0000:01:05.0 [ 14.697990] PCI: Transparent bridge - 0000:00:14.4 [ 14.698061] ACPI: PCI Interrupt Routing Table [\_SB_.C047._PRT] [ 14.698252] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C048._PRT] [ 14.698332] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C0AB._PRT] [ 14.710069] ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled. [ 14.710193] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled. [ 14.710314] ACPI: PCI Interrupt Link [C0F2] (IRQs 10 11) *0, disabled. [ 14.710434] ACPI: PCI Interrupt Link [C0F3] (IRQs 10 11) *0, disabled. [ 14.710559] ACPI: PCI Interrupt Link [C0F4] (IRQs 10 11) *0, disabled. [ 14.710681] ACPI: PCI Interrupt Link [C0F5] (IRQs 9) *0, disabled. [ 14.710802] ACPI: PCI Interrupt Link [C0F6] (IRQs 10 11) *0, disabled. [ 14.710929] ACPI: PCI Interrupt Link [C0F7] (IRQs *10 11) [ 14.711040] ACPI: Power Resource [C1CF] (off) [ 14.711184] ACPI: Power Resource [C1B7] (on) [ 14.711224] ACPI: Power Resource [C1C7] (on) [ 14.711304] ACPI: Power Resource [C26C] (off) [ 14.711374] ACPI: Power Resource [C26D] (off) [ 14.711444] ACPI: Power Resource [C26E] (off) [ 14.711521] ACPI: Power Resource [C26F] (off) [ 14.711532] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.711547] pnp: PnP ACPI init [ 14.717464] pnp: PnP ACPI: found 12 devices [ 14.717600] SCSI subsystem initialized [ 14.717667] usbcore: registered new interface driver usbfs [ 14.717699] usbcore: registered new interface driver hub [ 14.717733] usbcore: registered new device driver usb [ 14.717805] PCI: Using ACPI for IRQ routing [ 14.717811] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.717822] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0 [ 14.717827] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0 [ 14.717831] PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0 [ 14.717836] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [ 14.717841] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [ 14.717845] PCI: Cannot allocate resource region 9 of bridge 0000:00:05.0 [ 14.717943] Bluetooth: Core ver 2.11 [ 14.717978] NET: Registered protocol family 31 [ 14.717983] Bluetooth: HCI device and connection manager initialized [ 14.717988] Bluetooth: HCI socket layer initialized [ 14.717992] NET: Registered protocol family 8 [ 14.717997] NET: Registered protocol family 20 [ 14.718042] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 14.718048] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 14.718054] pnp: 00:00: iomem range 0x100000-0x37ffffff could not be reserved [ 14.718063] pnp: 00:09: ioport range 0x40b-0x40b has been reserved [ 14.718069] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 14.718074] pnp: 00:09: ioport range 0x4d6-0x4d6 has been reserved [ 14.718080] pnp: 00:09: iomem range 0xffb80000-0xffbfffff could not be reserved [ 14.718087] pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved [ 14.718097] pnp: 00:0a: ioport range 0x8000-0x802f has been reserved [ 14.718102] pnp: 00:0a: ioport range 0x8100-0x811f has been reserved [ 14.718109] pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved [ 14.718117] pnp: 00:0a: iomem range 0xfec00000-0xfec000ff has been reserved [ 14.718124] pnp: 00:0b: iomem range 0xcf000-0xdffff has been reserved [ 14.718130] pnp: 00:0b: iomem range 0x38000000-0x3fffffff could not be reserved [ 14.718137] pnp: 00:0b: iomem range 0xfec01000-0xfec01fff could not be reserved [ 14.718358] ieee1394: Initialized config rom entry `ip1394' [ 14.718453] ACPI: PCI Interrupt 0000:04:04.2[C] -> GSI 21 (level, low) -> IRQ 21 [ 14.718487] Time: tsc clocksource has been installed. [ 14.768768] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d0013000-d00137ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 14.768872] PCI: Bridge: 0000:00:01.0 [ 14.768877] IO window: 2000-2fff [ 14.768882] MEM window: d0400000-d07fffff [ 14.768887] PREFETCH window: c0000000-cfffffff [ 14.768891] PCI: Bridge: 0000:00:04.0 [ 14.768894] IO window: disabled. [ 14.768898] MEM window: disabled. [ 14.768902] PREFETCH window: disabled. [ 14.768906] PCI: Bridge: 0000:00:05.0 [ 14.768909] IO window: disabled. [ 14.768913] MEM window: disabled. [ 14.768917] PREFETCH window: disabled. [ 14.768923] PCI: Bus 5, cardbus bridge: 0000:04:04.0 [ 14.768928] IO window: 00001000-000010ff [ 14.768932] IO window: 00001400-000014ff [ 14.768937] PREFETCH window: 50000000-53ffffff [ 14.768942] MEM window: 54000000-57ffffff [ 14.768946] PCI: Bridge: 0000:00:14.4 [ 14.768951] IO window: 1000-1fff [ 14.768956] MEM window: d0000000-d03fffff [ 14.768960] PREFETCH window: 50000000-53ffffff [ 14.768972] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 14.768977] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 14.769001] ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 14.769030] NET: Registered protocol family 2 [ 14.778427] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 14.778796] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 14.780966] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 14.781509] TCP: Hash tables configured (established 131072 bind 65536) [ 14.781515] TCP reno registered [ 14.785129] VFS: Disk quotas dquot_6.5.1 [ 14.785144] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 14.785248] Installing knfsd (copyright (C) 1996 [email protected]). [ 14.785519] NTFS driver 2.1.28 [Flags: R/O]. [ 14.785549] fuse init (API version 7.8) [ 14.785668] io scheduler noop registered [ 14.785673] io scheduler anticipatory registered [ 14.785677] io scheduler deadline registered [ 14.785690] io scheduler cfq registered (default) [ 14.785948] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 14.785965] assign_interrupt_mode Found MSI capability [ 14.785993] Allocate Port Service[0000:00:04.0:pcie00] [ 14.786028] Allocate Port Service[0000:00:04.0:pcie01] [ 14.786055] Allocate Port Service[0000:00:04.0:pcie02] [ 14.786098] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 14.786114] assign_interrupt_mode Found MSI capability [ 14.786132] Allocate Port Service[0000:00:05.0:pcie00] [ 14.786158] Allocate Port Service[0000:00:05.0:pcie01] [ 14.786188] Allocate Port Service[0000:00:05.0:pcie02] [ 14.786295] Evaluate _OSC Set fails. Status = 0x0005 [ 14.786300] Evaluate _OSC Set fails. Status = 0x0005 [ 14.786302] aer_init: AER service init fails - Run ACPI _OSC fails [ 14.786305] aer: probe of 0000:00:04.0:pcie01 failed with error 2 [ 14.786319] Evaluate _OSC Set fails. Status = 0x0005 [ 14.786323] Evaluate _OSC Set fails. Status = 0x0005 [ 14.786325] aer_init: AER service init fails - Run ACPI _OSC fails [ 14.786328] aer: probe of 0000:00:05.0:pcie01 failed with error 2 [ 14.786469] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 3072k, total 131072k [ 14.786477] vesafb: mode is 1024x768x16, linelength=2048, pages=84 [ 14.786482] vesafb: scrolling: redraw [ 14.786487] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 14.795523] Console: switching to colour frame buffer device 128x48 [ 14.803634] fb0: VESA VGA frame buffer device [ 14.805736] ACPI: AC Adapter [C177] (on-line) [ 14.827835] ACPI: Battery Slot [C179] (battery present) [ 14.828082] ACPI: Battery Slot [C178] (battery absent) [ 14.828259] input: Power Button (FF) as /class/input/input0 [ 14.828360] ACPI: Power Button (FF) [PWRF] [ 14.828501] input: Sleep Button (CM) as /class/input/input1 [ 14.828597] ACPI: Sleep Button (CM) [C1F0] [ 14.828716] input: Lid Switch as /class/input/input2 [ 14.828801] ACPI: Lid Switch [C1F1] [ 14.829030] ACPI: Transitioning device [C270] to D3 [ 14.829114] ACPI: Transitioning device [C270] to D3 [ 14.829197] ACPI: Fan [C270] (off) [ 14.829386] ACPI: Transitioning device [C271] to D3 [ 14.829470] ACPI: Transitioning device [C271] to D3 [ 14.829554] ACPI: Fan [C271] (off) [ 14.829739] ACPI: Transitioning device [C272] to D3 [ 14.829822] ACPI: Transitioning device [C272] to D3 [ 14.831033] ACPI: Fan [C272] (off) [ 14.832399] ACPI: Transitioning device [C273] to D3 [ 14.833707] ACPI: Transitioning device [C273] to D3 [ 14.835024] ACPI: Fan [C273] (off) [ 14.836539] ACPI: Video Device [C049] (multi-head: yes rom: no post: no) [ 14.838232] ACPI: CPU0 (power states: C1[C1] C3[C3]) [ 14.839768] ACPI: Processor [C000] (supports 8 throttling states) [ 14.847395] ACPI: Thermal Zone [TZ1] (50 C) [ 14.852176] ACPI: Thermal Zone [TZ2] (36 C) [ 14.862087] ACPI: Thermal Zone [TZ3] (23 C) [ 14.863816] ibm_acpi: ec object not found [ 14.886192] Non-volatile memory driver v1.2 [ 14.888061] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=0) [ 14.890021] sc1200wdt: build 20020303 [ 14.892035] sc1200wdt: io parameter must be specified [ 14.894105] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 14.896261] Linux agpgart interface v0.102 (c) Dave Jones [ 14.898540] ipmi message handler version 39.1 [ 14.900802] ipmi device interface [ 14.903124] IPMI System Interface driver. [ 14.913230] ipmi_si: Unable to find any System Interface(s) [ 14.915629] IPMI Watchdog: driver initialized [ 14.918076] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 14.920678] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 14.923343] Hangcheck: Using get_cycles(). [ 14.925940] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 14.929137] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 14.932322] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 14.935358] loop: loaded (max 8 devices) [ 14.938283] nbd: registered device at major 43 [ 14.941605] ACPI: PCI Interrupt 0000:04:04.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 14.944589] tg3.c:v3.75 (March 23, 2007) [ 14.947450] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 14.979958] eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:0f:b0:f7:d7:da [ 14.986097] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 14.989346] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 14.992659] PPP generic driver version 2.4.2 [ 14.995956] PPP Deflate Compression module registered [ 14.999286] PPP BSD Compression module registered [ 15.002658] PPP MPPE Compression module registered [ 15.006003] NET: Registered protocol family 24 [ 15.009452] tun: Universal TUN/TAP device driver, 1.6 [ 15.012863] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 15.016342] bcm43xx driver [ 15.019932] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 15.029560] bcm43xx: Chip ID 0x4318, rev 0x2 [ 15.033117] bcm43xx: Number of cores: 4 [ 15.036627] bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243 [ 15.040165] bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243 [ 15.043640] bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243 [ 15.047120] bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243 [ 15.053942] bcm43xx: PHY connected [ 15.057400] bcm43xx: Detected PHY: Analog: 3, Type 2, Revision 7 [ 15.060917] bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8) [ 15.064432] bcm43xx: Radio turned off [ 15.067865] bcm43xx: Radio turned off [ 15.071351] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 15.074778] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 15.078289] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 15.081788] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.085360] ATIIXP: chipset revision 0 [ 15.088920] ATIIXP: not 100% native mode: will probe irqs later [ 15.092505] ide0: BM-DMA at 0x3010-0x3017, BIOS settings: hda:DMA, hdb:pio [ 15.096158] ide1: BM-DMA at 0x3018-0x301f, BIOS settings: hdc:DMA, hdd:pio [ 15.099722] Probing IDE interface ide0... [ 15.141867] Time: acpi_pm clocksource has been installed. [ 15.364988] hda: FUJITSU MHV2080AH, ATA DISK drive [ 15.982317] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 15.985770] Probing IDE interface ide1... [ 16.143518] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f99292d1c0c] [ 16.657068] hdc: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive [ 16.965493] ide1 at 0x170-0x177,0x376 on irq 15 [ 16.969044] hda: max request size: 128KiB [ 16.972327] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 17.000281] hda: cache flushes supported [ 17.003649] hda: hda1 hda2 < hda5 hda6 hda7 hda8 > [ 17.055346] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, (U)DMA [ 17.058739] Uniform CD-ROM driver Revision: 3.20 [ 17.065668] ieee1394: raw1394: /dev/raw1394 device initialized [ 17.068869] usbmon: debugfs is not available [ 17.072032] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 17.075224] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 17.078434] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 17.081697] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0802000 [ 17.084889] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 17.088246] usb usb1: configuration #1 chosen from 1 choice [ 17.091517] hub 1-0:1.0: USB hub found [ 17.094734] hub 1-0:1.0: 8 ports detected [ 17.197914] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 17.197949] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 17.201205] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 17.204438] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 17.207666] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0800000 [ 17.265819] usb usb2: configuration #1 chosen from 1 choice [ 17.269069] hub 2-0:1.0: USB hub found [ 17.272323] hub 2-0:1.0: 4 ports detected [ 17.375625] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 17.379043] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 17.382478] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 17.385929] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0801000 [ 17.443581] usb usb3: configuration #1 chosen from 1 choice [ 17.447019] hub 3-0:1.0: USB hub found [ 17.450458] hub 3-0:1.0: 4 ports detected [ 18.011601] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 18.150602] usb 3-1: configuration #1 chosen from 1 choice [ 18.371067] usb 3-3: new low speed USB device using ohci_hcd and address 3 [ 18.516117] usb 3-3: configuration #1 chosen from 1 choice [ 18.520174] usbcore: registered new interface driver usblp [ 18.523518] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 18.526869] Initializing USB Mass Storage driver... [ 18.530285] usbcore: registered new interface driver usb-storage [ 18.533676] USB Mass Storage support registered. [ 18.537070] usbcore: registered new interface driver hiddev [ 18.546242] input: Logitech USB Receiver as /class/input/input3 [ 18.549667] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 [ 18.553143] usbcore: registered new interface driver usbhid [ 18.556622] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 18.560147] PNP: PS/2 Controller [PNP0303:C1C4,PNP0f13:C1C5] at 0x60,0x64 irq 1,12 [ 18.565420] i8042.c: Detected active multiplexing controller, rev 1.1. [ 18.569691] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.573189] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 18.576632] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 18.580000] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 18.583311] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 18.586675] mice: PS/2 mouse device common for all mice [ 18.611409] input: AT Translated Set 2 keyboard as /class/input/input4 [ 18.624551] input: PC Speaker as /class/input/input5 [ 19.232286] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 19.278131] input: SynPS/2 Synaptics TouchPad as /class/input/input6 [ 19.284292] I2O subsystem v1.325 [ 19.287574] i2o: max drivers = 8 [ 19.290926] i2c /dev entries driver [ 19.294353] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected] [ 19.297703] Bluetooth: HCI USB driver ver 2.9 [ 19.301040] usbcore: registered new interface driver hci_usb [ 19.304389] Bluetooth: Virtual HCI driver ver 1.2 [ 19.307731] Bluetooth: HCI UART driver ver 2.2 [ 19.311021] Bluetooth: HCI H4 protocol initialized [ 19.314330] Bluetooth: HCI BCSP protocol initialized [ 19.317583] Bluetooth: Broadcom Blutonium firmware driver ver 1.1 [ 19.320839] usbcore: registered new interface driver bcm203x [ 19.324086] Bluetooth: Digianswer Bluetooth USB driver ver 0.8 [ 19.327359] usbcore: registered new interface driver bpa10x [ 19.330615] Bluetooth: BlueFRITZ! USB driver ver 1.1 [ 19.333888] usbcore: registered new interface driver bfusb [ 19.337188] EDAC MC: Ver: 2.0.1 Apr 23 2007 [ 19.340607] sdhci: Secure Digital Host Controller Interface driver [ 19.343884] sdhci: Copyright(c) Pierre Ossman [ 19.347158] sdhci: SDHCI controller found at 0000:04:04.4 [104c:8034] (rev 0) [ 19.350478] ACPI: PCI Interrupt 0000:04:04.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 19.353897] mmc0: SDHCI at 0xd001a000 irq 21 DMA [ 19.357237] mmc1: SDHCI at 0xd001b000 irq 21 DMA [ 19.360493] mmc2: SDHCI at 0xd001c000 irq 21 DMA [ 19.363637] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 19.366793] wbsd: Copyright(c) Pierre Ossman [ 19.369981] Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). [ 19.373451] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 19.386258] ALSA device list: [ 19.389441] #0: ATI IXP rev 2 with unknown codec at 0xd0804000, irq 17 [ 19.392706] oprofile: using NMI interrupt. [ 19.395901] Netfilter messages via NETLINK v0.30. [ 19.399069] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.402215] arp_tables: (C) 2002 David S. Miller [ 19.405354] TCP cubic registered [ 19.408513] NET: Registered protocol family 1 [ 19.411745] NET: Registered protocol family 10 [ 19.416030] lo: Disabled Privacy Extensions [ 19.419303] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 19.422524] IPv6 over IPv4 tunneling driver [ 19.425759] sit0: Disabled Privacy Extensions [ 19.430020] NET: Registered protocol family 17 [ 19.433081] Bluetooth: L2CAP ver 2.8 [ 19.436098] Bluetooth: L2CAP socket layer initialized [ 19.439136] Bluetooth: SCO (Voice Link) ver 0.5 [ 19.442181] Bluetooth: SCO socket layer initialized [ 19.445159] Bluetooth: RFCOMM socket layer initialized [ 19.448080] Bluetooth: RFCOMM TTY layer initialized [ 19.450959] Bluetooth: RFCOMM ver 1.8 [ 19.453789] Bluetooth: BNEP (Ethernet Emulation) ver 1.2 [ 19.456643] Bluetooth: BNEP filters: protocol multicast [ 19.459496] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 19.462420] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]> [ 19.465359] All bugs added by David S. Miller <[email protected]> [ 19.468315] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 19.471278] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 19.474299] ieee80211_crypt: registered algorithm 'NULL' [ 19.474301] ieee80211_crypt: registered algorithm 'WEP' [ 19.474303] ieee80211_crypt: registered algorithm 'CCMP' [ 19.474305] ieee80211_crypt: registered algorithm 'TKIP' [ 19.474310] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile ML-40 processors (version 2.00.00) [ 19.480053] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x4 [ 19.483113] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 [ 19.486122] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 [ 19.489065] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0xa [ 19.491950] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x16 [ 19.494823] powernow-k8: ph2 null fid transition 0xe [ 19.497666] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 19.524230] kjournald starting. Commit interval 5 seconds [ 19.527101] EXT3-fs: mounted filesystem with ordered data mode. [ 19.530059] VFS: Mounted root (ext3 filesystem) readonly. [ 19.533056] Freeing unused kernel memory: 232k freed [ 25.011599] EXT3 FS on hda7, internal journal [ 25.438770] kjournald starting. Commit interval 5 seconds [ 25.439064] EXT3 FS on hda8, internal journal [ 25.439068] EXT3-fs: mounted filesystem with ordered data mode. [ 25.485981] NTFS volume version 3.1. [ 25.597764] Adding 1791208k swap on /dev/hda6. Priority:-1 extents:1 across:1791208k [ 25.704145] Real Time Clock Driver v1.12ac [ 45.180727] PM: Writing back config space on device 0000:04:01.0 at offset b (was 3ed173b, writing 308b103c) [ 45.180752] PM: Writing back config space on device 0000:04:01.0 at offset 3 (was 0, writing 4010) [ 45.180759] PM: Writing back config space on device 0000:04:01.0 at offset 2 (was 2000000, writing 2000003) [ 45.180766] PM: Writing back config space on device 0000:04:01.0 at offset 1 (was 2b00000, writing 2b00006) [ 45.180773] PM: Writing back config space on device 0000:04:01.0 at offset 0 (was 3ed173b, writing 169c14e4) [ 45.474777] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 47.145294] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 47.145301] tg3: eth0: Flow control is on for TX and on for RX. [ 47.146828] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 57.152522] eth0: no IPv6 routers present [ 0.000000] Linux version 2.6.21-rc7 (mihai@mdontu-l) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 PREEMPT Mon Apr 23 04:16:33 EEST 2007 [ 0.000000] Command line: vga=791 nohz=on [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fd0000 (usable) [ 0.000000] BIOS-e820: 0000000037fd0000 - 0000000037fefc00 (reserved) [ 0.000000] BIOS-e820: 0000000037fefc00 - 0000000037ffb000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037ffb000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 229328) 1 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FE270, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 37FEFC84, 0034 (r1 HP 0944 22110520 HP 1) [ 0.000000] ACPI: FACP 37FEFC00, 0084 (r2 HP 0944 2 HP 1) [ 0.000000] ACPI: DSDT 37FEFD50, 7489 (r1 HP SB400 10000 MSFT 100000E) [ 0.000000] ACPI: FACS 37FFAE80, 0040 [ 0.000000] ACPI: APIC 37FEFCB8, 005A (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: MCFG 37FEFD14, 003C (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: SSDT 37FF71D9, 0382 (r1 HP HPQPpc 1001 MSFT 100000E) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 229328) 1 entries of 256 used [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 229328 [ 0.000000] On node 0 totalpages: 229231 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2012 pages reserved [ 0.000000] DMA zone: 1931 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3079 pages used for memmap [ 0.000000] DMA32 zone: 222153 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfec01000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000 [ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 224084 [ 0.000000] Kernel command line: vga=791 nohz=on [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 16.881066] time.c: Detected 2194.636 MHz processor. [ 16.881136] Console: colour dummy device 80x25 [ 16.883258] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 16.884649] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 16.904728] Memory: 894468k/917312k available (4263k kernel code, 22208k reserved, 1795k data, 232k init) [ 16.963932] Calibrating delay using timer specific routine.. 4395.21 BogoMIPS (lpj=2197606) [ 16.964004] Mount-cache hash table entries: 256 [ 16.964200] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.964206] CPU: L2 Cache: 1024K (64 bytes/line) [ 16.964232] CPU: AMD Turion(tm) 64 Mobile ML-40 stepping 02 [ 16.964257] ACPI: Core revision 20070126 [ 17.011244] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 17.021256] Using local APIC timer interrupts. [ 17.066768] result 12469524 [ 17.066772] Detected 12.469 MHz APIC timer. [ 17.067919] NET: Registered protocol family 16 [ 17.068005] No dock devices found. [ 17.068075] ACPI: bus type pci registered [ 17.071049] PCI: Using MMCONFIG at e0000000 - efffffff [ 17.071095] PCI: No mmconfig possible on device 00:18 [ 17.084371] ACPI: Interpreter enabled [ 17.084381] ACPI: (supports S0 S3 S4 S5) [ 17.084398] ACPI: Using IOAPIC for interrupt routing [ 17.099556] ACPI: PCI Root Bridge [C047] (0000:00) [ 17.099569] PCI: Probing PCI hardware (bus 00) [ 17.099982] 0000:00:14.1: trying to change BAR0 from 0000 to 01F0 [ 17.099988] 0000:00:14.1: trying to change BAR1 from 0000 to 03F4 [ 17.099993] 0000:00:14.1: trying to change BAR2 from 0000 to 0170 [ 17.099998] 0000:00:14.1: trying to change BAR3 from 0000 to 0374 [ 17.100301] Boot video device is 0000:01:05.0 [ 17.100994] PCI: Transparent bridge - 0000:00:14.4 [ 17.101059] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') [ 17.101067] Please report the result to linux-kernel to fix this permanently [ 17.101090] ACPI: PCI Interrupt Routing Table [\_SB_.C047._PRT] [ 17.101284] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C048._PRT] [ 17.101364] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C0AB._PRT] [ 17.113098] ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled. [ 17.113221] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled. [ 17.113342] ACPI: PCI Interrupt Link [C0F2] (IRQs 10 11) *0, disabled. [ 17.113463] ACPI: PCI Interrupt Link [C0F3] (IRQs 10 11) *0, disabled. [ 17.113584] ACPI: PCI Interrupt Link [C0F4] (IRQs 10 11) *0, disabled. [ 17.113711] ACPI: PCI Interrupt Link [C0F5] (IRQs 9) *0, disabled. [ 17.113833] ACPI: PCI Interrupt Link [C0F6] (IRQs 10 11) *0, disabled. [ 17.113961] ACPI: PCI Interrupt Link [C0F7] (IRQs *10 11) [ 17.114071] ACPI: Power Resource [C1CF] (off) [ 17.114215] ACPI: Power Resource [C1B7] (on) [ 17.114254] ACPI: Power Resource [C1C7] (on) [ 17.114333] ACPI: Power Resource [C26C] (off) [ 17.114403] ACPI: Power Resource [C26D] (off) [ 17.114472] ACPI: Power Resource [C26E] (off) [ 17.114542] ACPI: Power Resource [C26F] (off) [ 17.114553] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.114568] pnp: PnP ACPI init [ 17.120505] pnp: PnP ACPI: found 12 devices [ 17.120636] SCSI subsystem initialized [ 17.120711] usbcore: registered new interface driver usbfs [ 17.120741] usbcore: registered new interface driver hub [ 17.120773] usbcore: registered new device driver usb [ 17.120841] PCI: Using ACPI for IRQ routing [ 17.120847] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.120857] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0 [ 17.120862] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0 [ 17.120867] PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0 [ 17.120872] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [ 17.120876] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [ 17.120881] PCI: Cannot allocate resource region 9 of bridge 0000:00:05.0 [ 17.120978] Bluetooth: Core ver 2.11 [ 17.121015] NET: Registered protocol family 31 [ 17.121019] Bluetooth: HCI device and connection manager initialized [ 17.121025] Bluetooth: HCI socket layer initialized [ 17.121029] NET: Registered protocol family 8 [ 17.121033] NET: Registered protocol family 20 [ 17.121076] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 17.121083] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 17.121088] pnp: 00:00: iomem range 0x100000-0x37ffffff could not be reserved [ 17.121097] pnp: 00:09: ioport range 0x40b-0x40b has been reserved [ 17.121103] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 17.121108] pnp: 00:09: ioport range 0x4d6-0x4d6 has been reserved [ 17.121114] pnp: 00:09: iomem range 0xffb80000-0xffbfffff could not be reserved [ 17.121121] pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved [ 17.121130] pnp: 00:0a: ioport range 0x8000-0x802f has been reserved [ 17.121136] pnp: 00:0a: ioport range 0x8100-0x811f has been reserved [ 17.121143] pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved [ 17.121150] pnp: 00:0a: iomem range 0xfec00000-0xfec000ff has been reserved [ 17.121157] pnp: 00:0b: iomem range 0xcf000-0xdffff has been reserved [ 17.121163] pnp: 00:0b: iomem range 0x38000000-0x3fffffff could not be reserved [ 17.121171] pnp: 00:0b: iomem range 0xfec01000-0xfec01fff could not be reserved [ 17.121389] ieee1394: Initialized config rom entry `ip1394' [ 17.121485] ACPI: PCI Interrupt 0000:02:04.2[C] -> GSI 21 (level, low) -> IRQ 21 [ 17.121683] Time: tsc clocksource has been installed. [ 17.171833] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d0013000-d00137ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 17.171937] PCI: Bridge: 0000:00:01.0 [ 17.171942] IO window: 2000-2fff [ 17.171947] MEM window: d0400000-d07fffff [ 17.171952] PREFETCH window: c0000000-cfffffff [ 17.171956] PCI: Bridge: 0000:00:04.0 [ 17.171959] IO window: disabled. [ 17.171963] MEM window: disabled. [ 17.171967] PREFETCH window: disabled. [ 17.171971] PCI: Bridge: 0000:00:05.0 [ 17.171974] IO window: disabled. [ 17.171978] MEM window: disabled. [ 17.171982] PREFETCH window: disabled. [ 17.171988] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 17.171993] IO window: 00001000-000010ff [ 17.171997] IO window: 00001400-000014ff [ 17.172002] PREFETCH window: 50000000-53ffffff [ 17.172007] MEM window: 54000000-57ffffff [ 17.172011] PCI: Bridge: 0000:00:14.4 [ 17.172016] IO window: 1000-1fff [ 17.172021] MEM window: d0000000-d03fffff [ 17.172025] PREFETCH window: 50000000-53ffffff [ 17.172037] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 17.172043] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 17.172067] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 17.172097] NET: Registered protocol family 2 [ 17.181624] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 17.181993] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 17.184158] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 17.184693] TCP: Hash tables configured (established 131072 bind 65536) [ 17.184699] TCP reno registered [ 17.188318] VFS: Disk quotas dquot_6.5.1 [ 17.188334] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 17.188439] Installing knfsd (copyright (C) 1996 [email protected]). [ 17.188708] NTFS driver 2.1.28 [Flags: R/O]. [ 17.188739] fuse init (API version 7.8) [ 17.188859] io scheduler noop registered [ 17.188865] io scheduler anticipatory registered [ 17.188869] io scheduler deadline registered [ 17.188882] io scheduler cfq registered (default) [ 17.189141] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 17.189157] assign_interrupt_mode Found MSI capability [ 17.189185] Allocate Port Service[0000:00:04.0:pcie00] [ 17.189222] Allocate Port Service[0000:00:04.0:pcie01] [ 17.189249] Allocate Port Service[0000:00:04.0:pcie02] [ 17.189293] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 17.189309] assign_interrupt_mode Found MSI capability [ 17.189326] Allocate Port Service[0000:00:05.0:pcie00] [ 17.189352] Allocate Port Service[0000:00:05.0:pcie01] [ 17.189383] Allocate Port Service[0000:00:05.0:pcie02] [ 17.189493] Evaluate _OSC Set fails. Status = 0x0005 [ 17.189498] Evaluate _OSC Set fails. Status = 0x0005 [ 17.189501] aer_init: AER service init fails - Run ACPI _OSC fails [ 17.189504] aer: probe of 0000:00:04.0:pcie01 failed with error 2 [ 17.189518] Evaluate _OSC Set fails. Status = 0x0005 [ 17.189522] Evaluate _OSC Set fails. Status = 0x0005 [ 17.189524] aer_init: AER service init fails - Run ACPI _OSC fails [ 17.189527] aer: probe of 0000:00:05.0:pcie01 failed with error 2 [ 17.189669] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 3072k, total 131072k [ 17.189678] vesafb: mode is 1024x768x16, linelength=2048, pages=84 [ 17.189682] vesafb: scrolling: redraw [ 17.189687] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 17.198727] Console: switching to colour frame buffer device 128x48 [ 17.206836] fb0: VESA VGA frame buffer device [ 17.208804] ACPI: AC Adapter [C177] (off-line) [ 17.230875] ACPI: Battery Slot [C179] (battery present) [ 17.231123] ACPI: Battery Slot [C178] (battery absent) [ 17.231299] input: Power Button (FF) as /class/input/input0 [ 17.231395] ACPI: Power Button (FF) [PWRF] [ 17.231539] input: Sleep Button (CM) as /class/input/input1 [ 17.231636] ACPI: Sleep Button (CM) [C1F0] [ 17.231755] input: Lid Switch as /class/input/input2 [ 17.231840] ACPI: Lid Switch [C1F1] [ 17.232069] ACPI: Transitioning device [C270] to D3 [ 17.232154] ACPI: Transitioning device [C270] to D3 [ 17.232238] ACPI: Fan [C270] (off) [ 17.232424] ACPI: Transitioning device [C271] to D3 [ 17.232507] ACPI: Transitioning device [C271] to D3 [ 17.232595] ACPI: Fan [C271] (off) [ 17.232783] ACPI: Transitioning device [C272] to D3 [ 17.232866] ACPI: Transitioning device [C272] to D3 [ 17.234080] ACPI: Fan [C272] (off) [ 17.235438] ACPI: Transitioning device [C273] to D3 [ 17.236748] ACPI: Transitioning device [C273] to D3 [ 17.238062] ACPI: Fan [C273] (off) [ 17.239584] ACPI: Video Device [C049] (multi-head: yes rom: no post: no) [ 17.241296] ACPI: CPU0 (power states: C1[C1] C3[C3]) [ 17.242832] ACPI: Processor [C000] (supports 8 throttling states) [ 17.250546] ACPI: Thermal Zone [TZ1] (38 C) [ 17.255362] ACPI: Thermal Zone [TZ2] (24 C) [ 17.265145] ACPI: Thermal Zone [TZ3] (22 C) [ 17.266877] ibm_acpi: ec object not found [ 17.289181] Non-volatile memory driver v1.2 [ 17.291050] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=0) [ 17.293014] sc1200wdt: build 20020303 [ 17.295038] sc1200wdt: io parameter must be specified [ 17.297120] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 17.299276] Linux agpgart interface v0.102 (c) Dave Jones [ 17.301562] ipmi message handler version 39.1 [ 17.303836] ipmi device interface [ 17.306168] IPMI System Interface driver. [ 17.316426] ipmi_si: Unable to find any System Interface(s) [ 17.318830] IPMI Watchdog: driver initialized [ 17.321287] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 17.323903] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 17.326577] Hangcheck: Using get_cycles(). [ 17.329190] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.332418] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 17.335619] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.338670] loop: loaded (max 8 devices) [ 17.341612] nbd: registered device at major 43 [ 17.344956] ACPI: PCI Interrupt 0000:02:04.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 17.347953] tg3.c:v3.75 (March 23, 2007) [ 17.350823] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 17.383185] eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:0f:b0:f7:d7:da [ 17.389348] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 17.392616] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 17.395951] PPP generic driver version 2.4.2 [ 17.399259] PPP Deflate Compression module registered [ 17.402594] PPP BSD Compression module registered [ 17.405983] PPP MPPE Compression module registered [ 17.409340] NET: Registered protocol family 24 [ 17.412809] tun: Universal TUN/TAP device driver, 1.6 [ 17.416237] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 17.419728] bcm43xx driver [ 17.423345] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 17.432996] bcm43xx: Chip ID 0x4318, rev 0x2 [ 17.436565] bcm43xx: Number of cores: 4 [ 17.440094] bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243 [ 17.443648] bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243 [ 17.447147] bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243 [ 17.450641] bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243 [ 17.457485] bcm43xx: PHY connected [ 17.460965] bcm43xx: Detected PHY: Analog: 3, Type 2, Revision 7 [ 17.464498] bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8) [ 17.468023] bcm43xx: Radio turned off [ 17.471474] bcm43xx: Radio turned off [ 17.474972] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 17.478415] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 17.481941] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 17.485448] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.489034] ATIIXP: chipset revision 0 [ 17.492607] ATIIXP: not 100% native mode: will probe irqs later [ 17.496215] ide0: BM-DMA at 0x3010-0x3017, BIOS settings: hda:DMA, hdb:pio [ 17.499885] ide1: BM-DMA at 0x3018-0x301f, BIOS settings: hdc:DMA, hdd:pio [ 17.503454] Probing IDE interface ide0... [ 17.546062] Time: acpi_pm clocksource has been installed. [ 17.769182] hda: FUJITSU MHV2080AH, ATA DISK drive [ 18.386438] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 18.389909] Probing IDE interface ide1... [ 18.547713] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f99292d1c0c] [ 19.061262] hdc: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive [ 19.369687] ide1 at 0x170-0x177,0x376 on irq 15 [ 19.373259] hda: max request size: 128KiB [ 19.376554] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 19.578420] hda: cache flushes supported [ 19.581801] hda: hda1 hda2 < hda5 hda6 hda7 hda8 > [ 19.635404] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, (U)DMA [ 19.638814] Uniform CD-ROM driver Revision: 3.20 [ 19.645749] ieee1394: raw1394: /dev/raw1394 device initialized [ 19.648963] usbmon: debugfs is not available [ 19.652131] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 19.655336] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 19.658553] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 19.661818] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0802000 [ 19.665025] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.668394] usb usb1: configuration #1 chosen from 1 choice [ 19.671681] hub 1-0:1.0: USB hub found [ 19.674908] hub 1-0:1.0: 8 ports detected [ 19.778832] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 19.778866] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 19.782142] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 19.785384] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 19.788614] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0800000 [ 19.846755] usb usb2: configuration #1 chosen from 1 choice [ 19.850017] hub 2-0:1.0: USB hub found [ 19.853278] hub 2-0:1.0: 4 ports detected [ 19.956558] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 19.959974] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 19.963420] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 19.966889] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0801000 [ 20.024516] usb usb3: configuration #1 chosen from 1 choice [ 20.027959] hub 3-0:1.0: USB hub found [ 20.031418] hub 3-0:1.0: 4 ports detected [ 20.592532] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 20.731533] usb 3-1: configuration #1 chosen from 1 choice [ 20.951999] usb 3-3: new low speed USB device using ohci_hcd and address 3 [ 21.097047] usb 3-3: configuration #1 chosen from 1 choice [ 21.101105] usbcore: registered new interface driver usblp [ 21.104464] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 21.107824] Initializing USB Mass Storage driver... [ 21.111262] usbcore: registered new interface driver usb-storage [ 21.114666] USB Mass Storage support registered. [ 21.118079] usbcore: registered new interface driver hiddev [ 21.127167] input: Logitech USB Receiver as /class/input/input3 [ 21.130610] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 [ 21.134107] usbcore: registered new interface driver usbhid [ 21.137603] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 21.141135] PNP: PS/2 Controller [PNP0303:C1C4,PNP0f13:C1C5] at 0x60,0x64 irq 1,12 [ 21.146471] i8042.c: Detected active multiplexing controller, rev 1.1. [ 21.150765] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.154282] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 21.157737] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 21.161130] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 21.164458] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 21.167837] mice: PS/2 mouse device common for all mice [ 21.192936] input: AT Translated Set 2 keyboard as /class/input/input4 [ 21.206547] input: PC Speaker as /class/input/input5 [ 21.813842] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 21.859050] input: SynPS/2 Synaptics TouchPad as /class/input/input6 [ 21.865212] I2O subsystem v1.325 [ 21.868506] i2o: max drivers = 8 [ 21.871863] i2c /dev entries driver [ 21.875305] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected] [ 21.878663] Bluetooth: HCI USB driver ver 2.9 [ 21.882015] usbcore: registered new interface driver hci_usb [ 21.885371] Bluetooth: Virtual HCI driver ver 1.2 [ 21.888722] Bluetooth: HCI UART driver ver 2.2 [ 21.892027] Bluetooth: HCI H4 protocol initialized [ 21.895344] Bluetooth: HCI BCSP protocol initialized [ 21.898607] Bluetooth: Broadcom Blutonium firmware driver ver 1.1 [ 21.901870] usbcore: registered new interface driver bcm203x [ 21.905120] Bluetooth: Digianswer Bluetooth USB driver ver 0.8 [ 21.908412] usbcore: registered new interface driver bpa10x [ 21.911674] Bluetooth: BlueFRITZ! USB driver ver 1.1 [ 21.914960] usbcore: registered new interface driver bfusb [ 21.918266] EDAC MC: Ver: 2.0.1 Apr 23 2007 [ 21.921696] sdhci: Secure Digital Host Controller Interface driver [ 21.924992] sdhci: Copyright(c) Pierre Ossman [ 21.928271] sdhci: SDHCI controller found at 0000:02:04.4 [104c:8034] (rev 0) [ 21.931594] ACPI: PCI Interrupt 0000:02:04.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 21.935018] mmc0: SDHCI at 0xd001a000 irq 21 DMA [ 21.938358] mmc1: SDHCI at 0xd001b000 irq 21 DMA [ 21.941625] mmc2: SDHCI at 0xd001c000 irq 21 DMA [ 21.944776] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 21.947944] wbsd: Copyright(c) Pierre Ossman [ 21.951140] Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). [ 21.954622] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 21.966448] ALSA device list: [ 21.970637] #0: ATI IXP rev 2 with unknown codec at 0xd0804000, irq 17 [ 21.974928] oprofile: using NMI interrupt. [ 21.978125] Netfilter messages via NETLINK v0.30. [ 21.981298] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.984449] arp_tables: (C) 2002 David S. Miller [ 21.987591] TCP cubic registered [ 21.990761] NET: Registered protocol family 1 [ 21.994011] NET: Registered protocol family 10 [ 21.998306] lo: Disabled Privacy Extensions [ 22.001589] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 22.004813] IPv6 over IPv4 tunneling driver [ 22.008063] sit0: Disabled Privacy Extensions [ 22.013347] NET: Registered protocol family 17 [ 22.016425] Bluetooth: L2CAP ver 2.8 [ 22.019449] Bluetooth: L2CAP socket layer initialized [ 22.022505] Bluetooth: SCO (Voice Link) ver 0.5 [ 22.025564] Bluetooth: SCO socket layer initialized [ 22.028561] Bluetooth: RFCOMM socket layer initialized [ 22.031494] Bluetooth: RFCOMM TTY layer initialized [ 22.034385] Bluetooth: RFCOMM ver 1.8 [ 22.037221] Bluetooth: BNEP (Ethernet Emulation) ver 1.2 [ 22.040087] Bluetooth: BNEP filters: protocol multicast [ 22.042961] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 22.045900] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]> [ 22.048854] All bugs added by David S. Miller <[email protected]> [ 22.051817] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 22.054797] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 22.057828] ieee80211_crypt: registered algorithm 'NULL' [ 22.057830] ieee80211_crypt: registered algorithm 'WEP' [ 22.057833] ieee80211_crypt: registered algorithm 'CCMP' [ 22.057835] ieee80211_crypt: registered algorithm 'TKIP' [ 22.057840] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile ML-40 processors (version 2.00.00) [ 22.063645] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x4 [ 22.066713] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 [ 22.069724] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 [ 22.072678] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0xa [ 22.075578] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x16 [ 22.085069] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 22.109885] kjournald starting. Commit interval 5 seconds [ 22.112358] EXT3-fs: mounted filesystem with ordered data mode. [ 22.114912] VFS: Mounted root (ext3 filesystem) readonly. [ 22.117553] Freeing unused kernel memory: 232k freed [ 26.855026] EXT3 FS on hda7, internal journal [ 27.203479] kjournald starting. Commit interval 5 seconds [ 27.203715] EXT3 FS on hda8, internal journal [ 27.203720] EXT3-fs: mounted filesystem with ordered data mode. [ 27.242746] NTFS volume version 3.1. [ 27.333431] Adding 1791208k swap on /dev/hda6. Priority:-1 extents:1 across:1791208k [ 27.429880] Real Time Clock Driver v1.12ac [ 44.950180] PM: Writing back config space on device 0000:02:01.0 at offset c (was f7f70000, writing 0) [ 44.950188] PM: Writing back config space on device 0000:02:01.0 at offset b (was 3ed173b, writing 308b103c) [ 44.950207] PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4010) [ 44.950213] PM: Writing back config space on device 0000:02:01.0 at offset 2 (was 2000000, writing 2000003) [ 44.950220] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2b00000, writing 2b00006) [ 44.950226] PM: Writing back config space on device 0000:02:01.0 at offset 0 (was 3ed173b, writing 169c14e4) [ 45.191234] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 46.523323] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 46.523329] tg3: eth0: Flow control is on for TX and on for RX. [ 46.524845] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 54.775436] eth0: no IPv6 routers present
Quoted 9 lines · you
Quoted 3 lines
Hi,
dmesg told me to report this to LKML.
And here is my report.
Quoted 1 line
Have a nice day..
x 2 ;)
And again, from a different email address.
I would also like to take the opportunity to apologise to Gene Heskett for
spamming him :)
Signature · 1 line
Mihai Donțu
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d0400000-d07fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cff00000 Capabilities: [44] HyperTransport: MSI Mapping Capabilities: [b0] #0d [0000]
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
Capabilities: [100] Advanced Error Reporting
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
Capabilities: [100] Advanced Error Reporting
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at d0800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at d0801000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at d0802000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
Subsystem: Hewlett-Packard Company MX6125
Flags: 66MHz, medium devsel
I/O ports at 8200 [size=16]
Memory at d0803000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at 3010 [size=16] Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if 01 [Subtractive decode])
Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=04, subordinate=08, sec-latency=64 I/O behind bridge: 00001000-00001fff Memory behind bridge: d0000000-d03fffff Prefetchable memory behind bridge: 50000000-53ffffff
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17
Memory at d0804000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company MX6125
Flags: 66MHz, slow devsel, IRQ 17
Memory at d0805000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 64, IRQ 5 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at 2000 [size=256] Memory at d0400000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at d0420000 [disabled] [size=128K] Capabilities: [50] Power Management version 2
04:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 23
Memory at d0000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
04:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, fast devsel, latency 64, IRQ 22
Memory at d0010000 (32-bit, non-prefetchable) [size=8K]
04:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at d0012000 (32-bit, non-prefetchable) [size=4K] Bus: primary=04, secondary=05, subordinate=08, sec-latency=176 Memory window 0: 50000000-53fff000 (prefetchable) Memory window 1: 54000000-57fff000 (prefetchable) I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff 16-bit legacy interface ports at 0001
04:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at d0013000 (32-bit, non-prefetchable) [size=2K]
Memory at d0014000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
04:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at d0018000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
04:04.4 Class 0805: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at d001a000 (32-bit, non-prefetchable) [size=256] Memory at d001b000 (32-bit, non-prefetchable) [size=256] Memory at d001c000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d0400000-d07fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cff00000 Capabilities: [44] HyperTransport: MSI Mapping Capabilities: [b0] #0d [0000]
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
Capabilities: [100] Advanced Error Reporting
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
Capabilities: [100] Advanced Error Reporting
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at d0800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at d0801000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at d0802000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
Subsystem: Hewlett-Packard Company MX6125
Flags: 66MHz, medium devsel
I/O ports at 8200 [size=16]
Memory at d0803000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at 3010 [size=16] Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if 01 [Subtractive decode])
Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=02, subordinate=03, sec-latency=64 I/O behind bridge: 00001000-00001fff Memory behind bridge: d0000000-d03fffff Prefetchable memory behind bridge: 50000000-53ffffff
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17
Memory at d0804000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company MX6125
Flags: 66MHz, slow devsel, IRQ 17
Memory at d0805000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 64, IRQ 5 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at 2000 [size=256] Memory at d0400000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at d0420000 [disabled] [size=128K] Capabilities: [50] Power Management version 2
02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 23
Memory at d0000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
02:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, fast devsel, latency 64, IRQ 22
Memory at d0010000 (32-bit, non-prefetchable) [size=8K]
02:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at d0012000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 50000000-53fff000 (prefetchable) Memory window 1: 54000000-57fff000 (prefetchable) I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff 16-bit legacy interface ports at 0001
02:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at d0013000 (32-bit, non-prefetchable) [size=2K]
Memory at d0014000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
02:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
Subsystem: Hewlett-Packard Company MX6125
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at d0018000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
02:04.4 Class 0805: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
Subsystem: Hewlett-Packard Company MX6125 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at d001a000 (32-bit, non-prefetchable) [size=256] Memory at d001b000 (32-bit, non-prefetchable) [size=256] Memory at d001c000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2
[ 0.000000] Linux version 2.6.21-rc7 (mihai@mdontu-l) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 PREEMPT Mon Apr 23 04:16:33 EEST 2007 [ 0.000000] Command line: vga=791 nohz=on pci=assign-busses [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fd0000 (usable) [ 0.000000] BIOS-e820: 0000000037fd0000 - 0000000037fefc00 (reserved) [ 0.000000] BIOS-e820: 0000000037fefc00 - 0000000037ffb000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037ffb000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 229328) 1 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FE270, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 37FEFC84, 0034 (r1 HP 0944 22110520 HP 1) [ 0.000000] ACPI: FACP 37FEFC00, 0084 (r2 HP 0944 2 HP 1) [ 0.000000] ACPI: DSDT 37FEFD50, 7489 (r1 HP SB400 10000 MSFT 100000E) [ 0.000000] ACPI: FACS 37FFAE80, 0040 [ 0.000000] ACPI: APIC 37FEFCB8, 005A (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: MCFG 37FEFD14, 003C (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: SSDT 37FF71D9, 0382 (r1 HP HPQPpc 1001 MSFT 100000E) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 229328) 1 entries of 256 used [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 229328 [ 0.000000] On node 0 totalpages: 229231 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2012 pages reserved [ 0.000000] DMA zone: 1931 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3079 pages used for memmap [ 0.000000] DMA32 zone: 222153 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfec01000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000 [ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 224084 [ 0.000000] Kernel command line: vga=791 nohz=on pci=assign-busses [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 14.486846] time.c: Detected 2194.539 MHz processor. [ 14.486898] Console: colour dummy device 80x25 [ 14.488383] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 14.489336] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 14.503372] Memory: 894468k/917312k available (4263k kernel code, 22208k reserved, 1795k data, 232k init) [ 14.562723] Calibrating delay using timer specific routine.. 4391.80 BogoMIPS (lpj=2195900) [ 14.562776] Mount-cache hash table entries: 256 [ 14.562916] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 14.562922] CPU: L2 Cache: 1024K (64 bytes/line) [ 14.562936] CPU: AMD Turion(tm) 64 Mobile ML-40 stepping 02 [ 14.562949] ACPI: Core revision 20070126 [ 14.608885] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 14.618890] Using local APIC timer interrupts. [ 14.664403] result 12468973 [ 14.664407] Detected 12.468 MHz APIC timer. [ 14.664719] NET: Registered protocol family 16 [ 14.664805] No dock devices found. [ 14.664874] ACPI: bus type pci registered [ 14.667859] PCI: Using MMCONFIG at e0000000 - efffffff [ 14.667905] PCI: No mmconfig possible on device 00:18 [ 14.681170] ACPI: Interpreter enabled [ 14.681180] ACPI: (supports S0 S3 S4 S5) [ 14.681197] ACPI: Using IOAPIC for interrupt routing [ 14.696539] ACPI: PCI Root Bridge [C047] (0000:00) [ 14.696553] PCI: Probing PCI hardware (bus 00) [ 14.696962] 0000:00:14.1: trying to change BAR0 from 0000 to 01F0 [ 14.696968] 0000:00:14.1: trying to change BAR1 from 0000 to 03F4 [ 14.696973] 0000:00:14.1: trying to change BAR2 from 0000 to 0170 [ 14.696977] 0000:00:14.1: trying to change BAR3 from 0000 to 0374 [ 14.697296] Boot video device is 0000:01:05.0 [ 14.697990] PCI: Transparent bridge - 0000:00:14.4 [ 14.698061] ACPI: PCI Interrupt Routing Table [\_SB_.C047._PRT] [ 14.698252] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C048._PRT] [ 14.698332] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C0AB._PRT] [ 14.710069] ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled. [ 14.710193] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled. [ 14.710314] ACPI: PCI Interrupt Link [C0F2] (IRQs 10 11) *0, disabled. [ 14.710434] ACPI: PCI Interrupt Link [C0F3] (IRQs 10 11) *0, disabled. [ 14.710559] ACPI: PCI Interrupt Link [C0F4] (IRQs 10 11) *0, disabled. [ 14.710681] ACPI: PCI Interrupt Link [C0F5] (IRQs 9) *0, disabled. [ 14.710802] ACPI: PCI Interrupt Link [C0F6] (IRQs 10 11) *0, disabled. [ 14.710929] ACPI: PCI Interrupt Link [C0F7] (IRQs *10 11) [ 14.711040] ACPI: Power Resource [C1CF] (off) [ 14.711184] ACPI: Power Resource [C1B7] (on) [ 14.711224] ACPI: Power Resource [C1C7] (on) [ 14.711304] ACPI: Power Resource [C26C] (off) [ 14.711374] ACPI: Power Resource [C26D] (off) [ 14.711444] ACPI: Power Resource [C26E] (off) [ 14.711521] ACPI: Power Resource [C26F] (off) [ 14.711532] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.711547] pnp: PnP ACPI init [ 14.717464] pnp: PnP ACPI: found 12 devices [ 14.717600] SCSI subsystem initialized [ 14.717667] usbcore: registered new interface driver usbfs [ 14.717699] usbcore: registered new interface driver hub [ 14.717733] usbcore: registered new device driver usb [ 14.717805] PCI: Using ACPI for IRQ routing [ 14.717811] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.717822] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0 [ 14.717827] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0 [ 14.717831] PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0 [ 14.717836] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [ 14.717841] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [ 14.717845] PCI: Cannot allocate resource region 9 of bridge 0000:00:05.0 [ 14.717943] Bluetooth: Core ver 2.11 [ 14.717978] NET: Registered protocol family 31 [ 14.717983] Bluetooth: HCI device and connection manager initialized [ 14.717988] Bluetooth: HCI socket layer initialized [ 14.717992] NET: Registered protocol family 8 [ 14.717997] NET: Registered protocol family 20 [ 14.718042] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 14.718048] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 14.718054] pnp: 00:00: iomem range 0x100000-0x37ffffff could not be reserved [ 14.718063] pnp: 00:09: ioport range 0x40b-0x40b has been reserved [ 14.718069] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 14.718074] pnp: 00:09: ioport range 0x4d6-0x4d6 has been reserved [ 14.718080] pnp: 00:09: iomem range 0xffb80000-0xffbfffff could not be reserved [ 14.718087] pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved [ 14.718097] pnp: 00:0a: ioport range 0x8000-0x802f has been reserved [ 14.718102] pnp: 00:0a: ioport range 0x8100-0x811f has been reserved [ 14.718109] pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved [ 14.718117] pnp: 00:0a: iomem range 0xfec00000-0xfec000ff has been reserved [ 14.718124] pnp: 00:0b: iomem range 0xcf000-0xdffff has been reserved [ 14.718130] pnp: 00:0b: iomem range 0x38000000-0x3fffffff could not be reserved [ 14.718137] pnp: 00:0b: iomem range 0xfec01000-0xfec01fff could not be reserved [ 14.718358] ieee1394: Initialized config rom entry `ip1394' [ 14.718453] ACPI: PCI Interrupt 0000:04:04.2[C] -> GSI 21 (level, low) -> IRQ 21 [ 14.718487] Time: tsc clocksource has been installed. [ 14.768768] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d0013000-d00137ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 14.768872] PCI: Bridge: 0000:00:01.0 [ 14.768877] IO window: 2000-2fff [ 14.768882] MEM window: d0400000-d07fffff [ 14.768887] PREFETCH window: c0000000-cfffffff [ 14.768891] PCI: Bridge: 0000:00:04.0 [ 14.768894] IO window: disabled. [ 14.768898] MEM window: disabled. [ 14.768902] PREFETCH window: disabled. [ 14.768906] PCI: Bridge: 0000:00:05.0 [ 14.768909] IO window: disabled. [ 14.768913] MEM window: disabled. [ 14.768917] PREFETCH window: disabled. [ 14.768923] PCI: Bus 5, cardbus bridge: 0000:04:04.0 [ 14.768928] IO window: 00001000-000010ff [ 14.768932] IO window: 00001400-000014ff [ 14.768937] PREFETCH window: 50000000-53ffffff [ 14.768942] MEM window: 54000000-57ffffff [ 14.768946] PCI: Bridge: 0000:00:14.4 [ 14.768951] IO window: 1000-1fff [ 14.768956] MEM window: d0000000-d03fffff [ 14.768960] PREFETCH window: 50000000-53ffffff [ 14.768972] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 14.768977] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 14.769001] ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 14.769030] NET: Registered protocol family 2 [ 14.778427] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 14.778796] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 14.780966] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 14.781509] TCP: Hash tables configured (established 131072 bind 65536) [ 14.781515] TCP reno registered [ 14.785129] VFS: Disk quotas dquot_6.5.1 [ 14.785144] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 14.785248] Installing knfsd (copyright (C) 1996 [email protected]). [ 14.785519] NTFS driver 2.1.28 [Flags: R/O]. [ 14.785549] fuse init (API version 7.8) [ 14.785668] io scheduler noop registered [ 14.785673] io scheduler anticipatory registered [ 14.785677] io scheduler deadline registered [ 14.785690] io scheduler cfq registered (default) [ 14.785948] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 14.785965] assign_interrupt_mode Found MSI capability [ 14.785993] Allocate Port Service[0000:00:04.0:pcie00] [ 14.786028] Allocate Port Service[0000:00:04.0:pcie01] [ 14.786055] Allocate Port Service[0000:00:04.0:pcie02] [ 14.786098] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 14.786114] assign_interrupt_mode Found MSI capability [ 14.786132] Allocate Port Service[0000:00:05.0:pcie00] [ 14.786158] Allocate Port Service[0000:00:05.0:pcie01] [ 14.786188] Allocate Port Service[0000:00:05.0:pcie02] [ 14.786295] Evaluate _OSC Set fails. Status = 0x0005 [ 14.786300] Evaluate _OSC Set fails. Status = 0x0005 [ 14.786302] aer_init: AER service init fails - Run ACPI _OSC fails [ 14.786305] aer: probe of 0000:00:04.0:pcie01 failed with error 2 [ 14.786319] Evaluate _OSC Set fails. Status = 0x0005 [ 14.786323] Evaluate _OSC Set fails. Status = 0x0005 [ 14.786325] aer_init: AER service init fails - Run ACPI _OSC fails [ 14.786328] aer: probe of 0000:00:05.0:pcie01 failed with error 2 [ 14.786469] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 3072k, total 131072k [ 14.786477] vesafb: mode is 1024x768x16, linelength=2048, pages=84 [ 14.786482] vesafb: scrolling: redraw [ 14.786487] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 14.795523] Console: switching to colour frame buffer device 128x48 [ 14.803634] fb0: VESA VGA frame buffer device [ 14.805736] ACPI: AC Adapter [C177] (on-line) [ 14.827835] ACPI: Battery Slot [C179] (battery present) [ 14.828082] ACPI: Battery Slot [C178] (battery absent) [ 14.828259] input: Power Button (FF) as /class/input/input0 [ 14.828360] ACPI: Power Button (FF) [PWRF] [ 14.828501] input: Sleep Button (CM) as /class/input/input1 [ 14.828597] ACPI: Sleep Button (CM) [C1F0] [ 14.828716] input: Lid Switch as /class/input/input2 [ 14.828801] ACPI: Lid Switch [C1F1] [ 14.829030] ACPI: Transitioning device [C270] to D3 [ 14.829114] ACPI: Transitioning device [C270] to D3 [ 14.829197] ACPI: Fan [C270] (off) [ 14.829386] ACPI: Transitioning device [C271] to D3 [ 14.829470] ACPI: Transitioning device [C271] to D3 [ 14.829554] ACPI: Fan [C271] (off) [ 14.829739] ACPI: Transitioning device [C272] to D3 [ 14.829822] ACPI: Transitioning device [C272] to D3 [ 14.831033] ACPI: Fan [C272] (off) [ 14.832399] ACPI: Transitioning device [C273] to D3 [ 14.833707] ACPI: Transitioning device [C273] to D3 [ 14.835024] ACPI: Fan [C273] (off) [ 14.836539] ACPI: Video Device [C049] (multi-head: yes rom: no post: no) [ 14.838232] ACPI: CPU0 (power states: C1[C1] C3[C3]) [ 14.839768] ACPI: Processor [C000] (supports 8 throttling states) [ 14.847395] ACPI: Thermal Zone [TZ1] (50 C) [ 14.852176] ACPI: Thermal Zone [TZ2] (36 C) [ 14.862087] ACPI: Thermal Zone [TZ3] (23 C) [ 14.863816] ibm_acpi: ec object not found [ 14.886192] Non-volatile memory driver v1.2 [ 14.888061] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=0) [ 14.890021] sc1200wdt: build 20020303 [ 14.892035] sc1200wdt: io parameter must be specified [ 14.894105] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 14.896261] Linux agpgart interface v0.102 (c) Dave Jones [ 14.898540] ipmi message handler version 39.1 [ 14.900802] ipmi device interface [ 14.903124] IPMI System Interface driver. [ 14.913230] ipmi_si: Unable to find any System Interface(s) [ 14.915629] IPMI Watchdog: driver initialized [ 14.918076] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 14.920678] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 14.923343] Hangcheck: Using get_cycles(). [ 14.925940] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 14.929137] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 14.932322] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 14.935358] loop: loaded (max 8 devices) [ 14.938283] nbd: registered device at major 43 [ 14.941605] ACPI: PCI Interrupt 0000:04:04.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 14.944589] tg3.c:v3.75 (March 23, 2007) [ 14.947450] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 14.979958] eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:0f:b0:f7:d7:da [ 14.986097] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 14.989346] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 14.992659] PPP generic driver version 2.4.2 [ 14.995956] PPP Deflate Compression module registered [ 14.999286] PPP BSD Compression module registered [ 15.002658] PPP MPPE Compression module registered [ 15.006003] NET: Registered protocol family 24 [ 15.009452] tun: Universal TUN/TAP device driver, 1.6 [ 15.012863] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 15.016342] bcm43xx driver [ 15.019932] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 15.029560] bcm43xx: Chip ID 0x4318, rev 0x2 [ 15.033117] bcm43xx: Number of cores: 4 [ 15.036627] bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243 [ 15.040165] bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243 [ 15.043640] bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243 [ 15.047120] bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243 [ 15.053942] bcm43xx: PHY connected [ 15.057400] bcm43xx: Detected PHY: Analog: 3, Type 2, Revision 7 [ 15.060917] bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8) [ 15.064432] bcm43xx: Radio turned off [ 15.067865] bcm43xx: Radio turned off [ 15.071351] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 15.074778] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 15.078289] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 15.081788] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.085360] ATIIXP: chipset revision 0 [ 15.088920] ATIIXP: not 100% native mode: will probe irqs later [ 15.092505] ide0: BM-DMA at 0x3010-0x3017, BIOS settings: hda:DMA, hdb:pio [ 15.096158] ide1: BM-DMA at 0x3018-0x301f, BIOS settings: hdc:DMA, hdd:pio [ 15.099722] Probing IDE interface ide0... [ 15.141867] Time: acpi_pm clocksource has been installed. [ 15.364988] hda: FUJITSU MHV2080AH, ATA DISK drive [ 15.982317] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 15.985770] Probing IDE interface ide1... [ 16.143518] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f99292d1c0c] [ 16.657068] hdc: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive [ 16.965493] ide1 at 0x170-0x177,0x376 on irq 15 [ 16.969044] hda: max request size: 128KiB [ 16.972327] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 17.000281] hda: cache flushes supported [ 17.003649] hda: hda1 hda2 < hda5 hda6 hda7 hda8 > [ 17.055346] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, (U)DMA [ 17.058739] Uniform CD-ROM driver Revision: 3.20 [ 17.065668] ieee1394: raw1394: /dev/raw1394 device initialized [ 17.068869] usbmon: debugfs is not available [ 17.072032] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 17.075224] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 17.078434] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 17.081697] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0802000 [ 17.084889] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 17.088246] usb usb1: configuration #1 chosen from 1 choice [ 17.091517] hub 1-0:1.0: USB hub found [ 17.094734] hub 1-0:1.0: 8 ports detected [ 17.197914] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 17.197949] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 17.201205] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 17.204438] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 17.207666] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0800000 [ 17.265819] usb usb2: configuration #1 chosen from 1 choice [ 17.269069] hub 2-0:1.0: USB hub found [ 17.272323] hub 2-0:1.0: 4 ports detected [ 17.375625] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 17.379043] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 17.382478] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 17.385929] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0801000 [ 17.443581] usb usb3: configuration #1 chosen from 1 choice [ 17.447019] hub 3-0:1.0: USB hub found [ 17.450458] hub 3-0:1.0: 4 ports detected [ 18.011601] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 18.150602] usb 3-1: configuration #1 chosen from 1 choice [ 18.371067] usb 3-3: new low speed USB device using ohci_hcd and address 3 [ 18.516117] usb 3-3: configuration #1 chosen from 1 choice [ 18.520174] usbcore: registered new interface driver usblp [ 18.523518] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 18.526869] Initializing USB Mass Storage driver... [ 18.530285] usbcore: registered new interface driver usb-storage [ 18.533676] USB Mass Storage support registered. [ 18.537070] usbcore: registered new interface driver hiddev [ 18.546242] input: Logitech USB Receiver as /class/input/input3 [ 18.549667] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 [ 18.553143] usbcore: registered new interface driver usbhid [ 18.556622] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 18.560147] PNP: PS/2 Controller [PNP0303:C1C4,PNP0f13:C1C5] at 0x60,0x64 irq 1,12 [ 18.565420] i8042.c: Detected active multiplexing controller, rev 1.1. [ 18.569691] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.573189] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 18.576632] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 18.580000] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 18.583311] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 18.586675] mice: PS/2 mouse device common for all mice [ 18.611409] input: AT Translated Set 2 keyboard as /class/input/input4 [ 18.624551] input: PC Speaker as /class/input/input5 [ 19.232286] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 19.278131] input: SynPS/2 Synaptics TouchPad as /class/input/input6 [ 19.284292] I2O subsystem v1.325 [ 19.287574] i2o: max drivers = 8 [ 19.290926] i2c /dev entries driver [ 19.294353] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected] [ 19.297703] Bluetooth: HCI USB driver ver 2.9 [ 19.301040] usbcore: registered new interface driver hci_usb [ 19.304389] Bluetooth: Virtual HCI driver ver 1.2 [ 19.307731] Bluetooth: HCI UART driver ver 2.2 [ 19.311021] Bluetooth: HCI H4 protocol initialized [ 19.314330] Bluetooth: HCI BCSP protocol initialized [ 19.317583] Bluetooth: Broadcom Blutonium firmware driver ver 1.1 [ 19.320839] usbcore: registered new interface driver bcm203x [ 19.324086] Bluetooth: Digianswer Bluetooth USB driver ver 0.8 [ 19.327359] usbcore: registered new interface driver bpa10x [ 19.330615] Bluetooth: BlueFRITZ! USB driver ver 1.1 [ 19.333888] usbcore: registered new interface driver bfusb [ 19.337188] EDAC MC: Ver: 2.0.1 Apr 23 2007 [ 19.340607] sdhci: Secure Digital Host Controller Interface driver [ 19.343884] sdhci: Copyright(c) Pierre Ossman [ 19.347158] sdhci: SDHCI controller found at 0000:04:04.4 [104c:8034] (rev 0) [ 19.350478] ACPI: PCI Interrupt 0000:04:04.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 19.353897] mmc0: SDHCI at 0xd001a000 irq 21 DMA [ 19.357237] mmc1: SDHCI at 0xd001b000 irq 21 DMA [ 19.360493] mmc2: SDHCI at 0xd001c000 irq 21 DMA [ 19.363637] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 19.366793] wbsd: Copyright(c) Pierre Ossman [ 19.369981] Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). [ 19.373451] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 19.386258] ALSA device list: [ 19.389441] #0: ATI IXP rev 2 with unknown codec at 0xd0804000, irq 17 [ 19.392706] oprofile: using NMI interrupt. [ 19.395901] Netfilter messages via NETLINK v0.30. [ 19.399069] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.402215] arp_tables: (C) 2002 David S. Miller [ 19.405354] TCP cubic registered [ 19.408513] NET: Registered protocol family 1 [ 19.411745] NET: Registered protocol family 10 [ 19.416030] lo: Disabled Privacy Extensions [ 19.419303] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 19.422524] IPv6 over IPv4 tunneling driver [ 19.425759] sit0: Disabled Privacy Extensions [ 19.430020] NET: Registered protocol family 17 [ 19.433081] Bluetooth: L2CAP ver 2.8 [ 19.436098] Bluetooth: L2CAP socket layer initialized [ 19.439136] Bluetooth: SCO (Voice Link) ver 0.5 [ 19.442181] Bluetooth: SCO socket layer initialized [ 19.445159] Bluetooth: RFCOMM socket layer initialized [ 19.448080] Bluetooth: RFCOMM TTY layer initialized [ 19.450959] Bluetooth: RFCOMM ver 1.8 [ 19.453789] Bluetooth: BNEP (Ethernet Emulation) ver 1.2 [ 19.456643] Bluetooth: BNEP filters: protocol multicast [ 19.459496] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 19.462420] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]> [ 19.465359] All bugs added by David S. Miller <[email protected]> [ 19.468315] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 19.471278] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 19.474299] ieee80211_crypt: registered algorithm 'NULL' [ 19.474301] ieee80211_crypt: registered algorithm 'WEP' [ 19.474303] ieee80211_crypt: registered algorithm 'CCMP' [ 19.474305] ieee80211_crypt: registered algorithm 'TKIP' [ 19.474310] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile ML-40 processors (version 2.00.00) [ 19.480053] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x4 [ 19.483113] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 [ 19.486122] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 [ 19.489065] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0xa [ 19.491950] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x16 [ 19.494823] powernow-k8: ph2 null fid transition 0xe [ 19.497666] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 19.524230] kjournald starting. Commit interval 5 seconds [ 19.527101] EXT3-fs: mounted filesystem with ordered data mode. [ 19.530059] VFS: Mounted root (ext3 filesystem) readonly. [ 19.533056] Freeing unused kernel memory: 232k freed [ 25.011599] EXT3 FS on hda7, internal journal [ 25.438770] kjournald starting. Commit interval 5 seconds [ 25.439064] EXT3 FS on hda8, internal journal [ 25.439068] EXT3-fs: mounted filesystem with ordered data mode. [ 25.485981] NTFS volume version 3.1. [ 25.597764] Adding 1791208k swap on /dev/hda6. Priority:-1 extents:1 across:1791208k [ 25.704145] Real Time Clock Driver v1.12ac [ 45.180727] PM: Writing back config space on device 0000:04:01.0 at offset b (was 3ed173b, writing 308b103c) [ 45.180752] PM: Writing back config space on device 0000:04:01.0 at offset 3 (was 0, writing 4010) [ 45.180759] PM: Writing back config space on device 0000:04:01.0 at offset 2 (was 2000000, writing 2000003) [ 45.180766] PM: Writing back config space on device 0000:04:01.0 at offset 1 (was 2b00000, writing 2b00006) [ 45.180773] PM: Writing back config space on device 0000:04:01.0 at offset 0 (was 3ed173b, writing 169c14e4) [ 45.474777] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 47.145294] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 47.145301] tg3: eth0: Flow control is on for TX and on for RX. [ 47.146828] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 57.152522] eth0: no IPv6 routers present [ 0.000000] Linux version 2.6.21-rc7 (mihai@mdontu-l) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 PREEMPT Mon Apr 23 04:16:33 EEST 2007 [ 0.000000] Command line: vga=791 nohz=on [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fd0000 (usable) [ 0.000000] BIOS-e820: 0000000037fd0000 - 0000000037fefc00 (reserved) [ 0.000000] BIOS-e820: 0000000037fefc00 - 0000000037ffb000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037ffb000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 229328) 1 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FE270, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 37FEFC84, 0034 (r1 HP 0944 22110520 HP 1) [ 0.000000] ACPI: FACP 37FEFC00, 0084 (r2 HP 0944 2 HP 1) [ 0.000000] ACPI: DSDT 37FEFD50, 7489 (r1 HP SB400 10000 MSFT 100000E) [ 0.000000] ACPI: FACS 37FFAE80, 0040 [ 0.000000] ACPI: APIC 37FEFCB8, 005A (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: MCFG 37FEFD14, 003C (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: SSDT 37FF71D9, 0382 (r1 HP HPQPpc 1001 MSFT 100000E) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 229328) 1 entries of 256 used [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 229328 [ 0.000000] On node 0 totalpages: 229231 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2012 pages reserved [ 0.000000] DMA zone: 1931 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3079 pages used for memmap [ 0.000000] DMA32 zone: 222153 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfec01000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000 [ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 224084 [ 0.000000] Kernel command line: vga=791 nohz=on [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 16.881066] time.c: Detected 2194.636 MHz processor. [ 16.881136] Console: colour dummy device 80x25 [ 16.883258] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 16.884649] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 16.904728] Memory: 894468k/917312k available (4263k kernel code, 22208k reserved, 1795k data, 232k init) [ 16.963932] Calibrating delay using timer specific routine.. 4395.21 BogoMIPS (lpj=2197606) [ 16.964004] Mount-cache hash table entries: 256 [ 16.964200] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.964206] CPU: L2 Cache: 1024K (64 bytes/line) [ 16.964232] CPU: AMD Turion(tm) 64 Mobile ML-40 stepping 02 [ 16.964257] ACPI: Core revision 20070126 [ 17.011244] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 17.021256] Using local APIC timer interrupts. [ 17.066768] result 12469524 [ 17.066772] Detected 12.469 MHz APIC timer. [ 17.067919] NET: Registered protocol family 16 [ 17.068005] No dock devices found. [ 17.068075] ACPI: bus type pci registered [ 17.071049] PCI: Using MMCONFIG at e0000000 - efffffff [ 17.071095] PCI: No mmconfig possible on device 00:18 [ 17.084371] ACPI: Interpreter enabled [ 17.084381] ACPI: (supports S0 S3 S4 S5) [ 17.084398] ACPI: Using IOAPIC for interrupt routing [ 17.099556] ACPI: PCI Root Bridge [C047] (0000:00) [ 17.099569] PCI: Probing PCI hardware (bus 00) [ 17.099982] 0000:00:14.1: trying to change BAR0 from 0000 to 01F0 [ 17.099988] 0000:00:14.1: trying to change BAR1 from 0000 to 03F4 [ 17.099993] 0000:00:14.1: trying to change BAR2 from 0000 to 0170 [ 17.099998] 0000:00:14.1: trying to change BAR3 from 0000 to 0374 [ 17.100301] Boot video device is 0000:01:05.0 [ 17.100994] PCI: Transparent bridge - 0000:00:14.4 [ 17.101059] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') [ 17.101067] Please report the result to linux-kernel to fix this permanently [ 17.101090] ACPI: PCI Interrupt Routing Table [\_SB_.C047._PRT] [ 17.101284] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C048._PRT] [ 17.101364] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C0AB._PRT] [ 17.113098] ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled. [ 17.113221] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled. [ 17.113342] ACPI: PCI Interrupt Link [C0F2] (IRQs 10 11) *0, disabled. [ 17.113463] ACPI: PCI Interrupt Link [C0F3] (IRQs 10 11) *0, disabled. [ 17.113584] ACPI: PCI Interrupt Link [C0F4] (IRQs 10 11) *0, disabled. [ 17.113711] ACPI: PCI Interrupt Link [C0F5] (IRQs 9) *0, disabled. [ 17.113833] ACPI: PCI Interrupt Link [C0F6] (IRQs 10 11) *0, disabled. [ 17.113961] ACPI: PCI Interrupt Link [C0F7] (IRQs *10 11) [ 17.114071] ACPI: Power Resource [C1CF] (off) [ 17.114215] ACPI: Power Resource [C1B7] (on) [ 17.114254] ACPI: Power Resource [C1C7] (on) [ 17.114333] ACPI: Power Resource [C26C] (off) [ 17.114403] ACPI: Power Resource [C26D] (off) [ 17.114472] ACPI: Power Resource [C26E] (off) [ 17.114542] ACPI: Power Resource [C26F] (off) [ 17.114553] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.114568] pnp: PnP ACPI init [ 17.120505] pnp: PnP ACPI: found 12 devices [ 17.120636] SCSI subsystem initialized [ 17.120711] usbcore: registered new interface driver usbfs [ 17.120741] usbcore: registered new interface driver hub [ 17.120773] usbcore: registered new device driver usb [ 17.120841] PCI: Using ACPI for IRQ routing [ 17.120847] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.120857] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0 [ 17.120862] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0 [ 17.120867] PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0 [ 17.120872] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [ 17.120876] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [ 17.120881] PCI: Cannot allocate resource region 9 of bridge 0000:00:05.0 [ 17.120978] Bluetooth: Core ver 2.11 [ 17.121015] NET: Registered protocol family 31 [ 17.121019] Bluetooth: HCI device and connection manager initialized [ 17.121025] Bluetooth: HCI socket layer initialized [ 17.121029] NET: Registered protocol family 8 [ 17.121033] NET: Registered protocol family 20 [ 17.121076] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 17.121083] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 17.121088] pnp: 00:00: iomem range 0x100000-0x37ffffff could not be reserved [ 17.121097] pnp: 00:09: ioport range 0x40b-0x40b has been reserved [ 17.121103] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 17.121108] pnp: 00:09: ioport range 0x4d6-0x4d6 has been reserved [ 17.121114] pnp: 00:09: iomem range 0xffb80000-0xffbfffff could not be reserved [ 17.121121] pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved [ 17.121130] pnp: 00:0a: ioport range 0x8000-0x802f has been reserved [ 17.121136] pnp: 00:0a: ioport range 0x8100-0x811f has been reserved [ 17.121143] pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved [ 17.121150] pnp: 00:0a: iomem range 0xfec00000-0xfec000ff has been reserved [ 17.121157] pnp: 00:0b: iomem range 0xcf000-0xdffff has been reserved [ 17.121163] pnp: 00:0b: iomem range 0x38000000-0x3fffffff could not be reserved [ 17.121171] pnp: 00:0b: iomem range 0xfec01000-0xfec01fff could not be reserved [ 17.121389] ieee1394: Initialized config rom entry `ip1394' [ 17.121485] ACPI: PCI Interrupt 0000:02:04.2[C] -> GSI 21 (level, low) -> IRQ 21 [ 17.121683] Time: tsc clocksource has been installed. [ 17.171833] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d0013000-d00137ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 17.171937] PCI: Bridge: 0000:00:01.0 [ 17.171942] IO window: 2000-2fff [ 17.171947] MEM window: d0400000-d07fffff [ 17.171952] PREFETCH window: c0000000-cfffffff [ 17.171956] PCI: Bridge: 0000:00:04.0 [ 17.171959] IO window: disabled. [ 17.171963] MEM window: disabled. [ 17.171967] PREFETCH window: disabled. [ 17.171971] PCI: Bridge: 0000:00:05.0 [ 17.171974] IO window: disabled. [ 17.171978] MEM window: disabled. [ 17.171982] PREFETCH window: disabled. [ 17.171988] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 17.171993] IO window: 00001000-000010ff [ 17.171997] IO window: 00001400-000014ff [ 17.172002] PREFETCH window: 50000000-53ffffff [ 17.172007] MEM window: 54000000-57ffffff [ 17.172011] PCI: Bridge: 0000:00:14.4 [ 17.172016] IO window: 1000-1fff [ 17.172021] MEM window: d0000000-d03fffff [ 17.172025] PREFETCH window: 50000000-53ffffff [ 17.172037] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 17.172043] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 17.172067] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 17.172097] NET: Registered protocol family 2 [ 17.181624] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 17.181993] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 17.184158] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 17.184693] TCP: Hash tables configured (established 131072 bind 65536) [ 17.184699] TCP reno registered [ 17.188318] VFS: Disk quotas dquot_6.5.1 [ 17.188334] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 17.188439] Installing knfsd (copyright (C) 1996 [email protected]). [ 17.188708] NTFS driver 2.1.28 [Flags: R/O]. [ 17.188739] fuse init (API version 7.8) [ 17.188859] io scheduler noop registered [ 17.188865] io scheduler anticipatory registered [ 17.188869] io scheduler deadline registered [ 17.188882] io scheduler cfq registered (default) [ 17.189141] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 17.189157] assign_interrupt_mode Found MSI capability [ 17.189185] Allocate Port Service[0000:00:04.0:pcie00] [ 17.189222] Allocate Port Service[0000:00:04.0:pcie01] [ 17.189249] Allocate Port Service[0000:00:04.0:pcie02] [ 17.189293] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 17.189309] assign_interrupt_mode Found MSI capability [ 17.189326] Allocate Port Service[0000:00:05.0:pcie00] [ 17.189352] Allocate Port Service[0000:00:05.0:pcie01] [ 17.189383] Allocate Port Service[0000:00:05.0:pcie02] [ 17.189493] Evaluate _OSC Set fails. Status = 0x0005 [ 17.189498] Evaluate _OSC Set fails. Status = 0x0005 [ 17.189501] aer_init: AER service init fails - Run ACPI _OSC fails [ 17.189504] aer: probe of 0000:00:04.0:pcie01 failed with error 2 [ 17.189518] Evaluate _OSC Set fails. Status = 0x0005 [ 17.189522] Evaluate _OSC Set fails. Status = 0x0005 [ 17.189524] aer_init: AER service init fails - Run ACPI _OSC fails [ 17.189527] aer: probe of 0000:00:05.0:pcie01 failed with error 2 [ 17.189669] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 3072k, total 131072k [ 17.189678] vesafb: mode is 1024x768x16, linelength=2048, pages=84 [ 17.189682] vesafb: scrolling: redraw [ 17.189687] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 17.198727] Console: switching to colour frame buffer device 128x48 [ 17.206836] fb0: VESA VGA frame buffer device [ 17.208804] ACPI: AC Adapter [C177] (off-line) [ 17.230875] ACPI: Battery Slot [C179] (battery present) [ 17.231123] ACPI: Battery Slot [C178] (battery absent) [ 17.231299] input: Power Button (FF) as /class/input/input0 [ 17.231395] ACPI: Power Button (FF) [PWRF] [ 17.231539] input: Sleep Button (CM) as /class/input/input1 [ 17.231636] ACPI: Sleep Button (CM) [C1F0] [ 17.231755] input: Lid Switch as /class/input/input2 [ 17.231840] ACPI: Lid Switch [C1F1] [ 17.232069] ACPI: Transitioning device [C270] to D3 [ 17.232154] ACPI: Transitioning device [C270] to D3 [ 17.232238] ACPI: Fan [C270] (off) [ 17.232424] ACPI: Transitioning device [C271] to D3 [ 17.232507] ACPI: Transitioning device [C271] to D3 [ 17.232595] ACPI: Fan [C271] (off) [ 17.232783] ACPI: Transitioning device [C272] to D3 [ 17.232866] ACPI: Transitioning device [C272] to D3 [ 17.234080] ACPI: Fan [C272] (off) [ 17.235438] ACPI: Transitioning device [C273] to D3 [ 17.236748] ACPI: Transitioning device [C273] to D3 [ 17.238062] ACPI: Fan [C273] (off) [ 17.239584] ACPI: Video Device [C049] (multi-head: yes rom: no post: no) [ 17.241296] ACPI: CPU0 (power states: C1[C1] C3[C3]) [ 17.242832] ACPI: Processor [C000] (supports 8 throttling states) [ 17.250546] ACPI: Thermal Zone [TZ1] (38 C) [ 17.255362] ACPI: Thermal Zone [TZ2] (24 C) [ 17.265145] ACPI: Thermal Zone [TZ3] (22 C) [ 17.266877] ibm_acpi: ec object not found [ 17.289181] Non-volatile memory driver v1.2 [ 17.291050] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=0) [ 17.293014] sc1200wdt: build 20020303 [ 17.295038] sc1200wdt: io parameter must be specified [ 17.297120] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 17.299276] Linux agpgart interface v0.102 (c) Dave Jones [ 17.301562] ipmi message handler version 39.1 [ 17.303836] ipmi device interface [ 17.306168] IPMI System Interface driver. [ 17.316426] ipmi_si: Unable to find any System Interface(s) [ 17.318830] IPMI Watchdog: driver initialized [ 17.321287] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 17.323903] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 17.326577] Hangcheck: Using get_cycles(). [ 17.329190] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.332418] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 17.335619] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.338670] loop: loaded (max 8 devices) [ 17.341612] nbd: registered device at major 43 [ 17.344956] ACPI: PCI Interrupt 0000:02:04.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 17.347953] tg3.c:v3.75 (March 23, 2007) [ 17.350823] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 17.383185] eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:0f:b0:f7:d7:da [ 17.389348] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 17.392616] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 17.395951] PPP generic driver version 2.4.2 [ 17.399259] PPP Deflate Compression module registered [ 17.402594] PPP BSD Compression module registered [ 17.405983] PPP MPPE Compression module registered [ 17.409340] NET: Registered protocol family 24 [ 17.412809] tun: Universal TUN/TAP device driver, 1.6 [ 17.416237] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 17.419728] bcm43xx driver [ 17.423345] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 17.432996] bcm43xx: Chip ID 0x4318, rev 0x2 [ 17.436565] bcm43xx: Number of cores: 4 [ 17.440094] bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243 [ 17.443648] bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243 [ 17.447147] bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243 [ 17.450641] bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243 [ 17.457485] bcm43xx: PHY connected [ 17.460965] bcm43xx: Detected PHY: Analog: 3, Type 2, Revision 7 [ 17.464498] bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8) [ 17.468023] bcm43xx: Radio turned off [ 17.471474] bcm43xx: Radio turned off [ 17.474972] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 17.478415] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 17.481941] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 17.485448] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.489034] ATIIXP: chipset revision 0 [ 17.492607] ATIIXP: not 100% native mode: will probe irqs later [ 17.496215] ide0: BM-DMA at 0x3010-0x3017, BIOS settings: hda:DMA, hdb:pio [ 17.499885] ide1: BM-DMA at 0x3018-0x301f, BIOS settings: hdc:DMA, hdd:pio [ 17.503454] Probing IDE interface ide0... [ 17.546062] Time: acpi_pm clocksource has been installed. [ 17.769182] hda: FUJITSU MHV2080AH, ATA DISK drive [ 18.386438] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 18.389909] Probing IDE interface ide1... [ 18.547713] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f99292d1c0c] [ 19.061262] hdc: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive [ 19.369687] ide1 at 0x170-0x177,0x376 on irq 15 [ 19.373259] hda: max request size: 128KiB [ 19.376554] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 19.578420] hda: cache flushes supported [ 19.581801] hda: hda1 hda2 < hda5 hda6 hda7 hda8 > [ 19.635404] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, (U)DMA [ 19.638814] Uniform CD-ROM driver Revision: 3.20 [ 19.645749] ieee1394: raw1394: /dev/raw1394 device initialized [ 19.648963] usbmon: debugfs is not available [ 19.652131] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 19.655336] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 19.658553] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 19.661818] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0802000 [ 19.665025] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.668394] usb usb1: configuration #1 chosen from 1 choice [ 19.671681] hub 1-0:1.0: USB hub found [ 19.674908] hub 1-0:1.0: 8 ports detected [ 19.778832] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 19.778866] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 19.782142] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 19.785384] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 19.788614] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0800000 [ 19.846755] usb usb2: configuration #1 chosen from 1 choice [ 19.850017] hub 2-0:1.0: USB hub found [ 19.853278] hub 2-0:1.0: 4 ports detected [ 19.956558] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 19.959974] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 19.963420] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 19.966889] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0801000 [ 20.024516] usb usb3: configuration #1 chosen from 1 choice [ 20.027959] hub 3-0:1.0: USB hub found [ 20.031418] hub 3-0:1.0: 4 ports detected [ 20.592532] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 20.731533] usb 3-1: configuration #1 chosen from 1 choice [ 20.951999] usb 3-3: new low speed USB device using ohci_hcd and address 3 [ 21.097047] usb 3-3: configuration #1 chosen from 1 choice [ 21.101105] usbcore: registered new interface driver usblp [ 21.104464] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 21.107824] Initializing USB Mass Storage driver... [ 21.111262] usbcore: registered new interface driver usb-storage [ 21.114666] USB Mass Storage support registered. [ 21.118079] usbcore: registered new interface driver hiddev [ 21.127167] input: Logitech USB Receiver as /class/input/input3 [ 21.130610] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 [ 21.134107] usbcore: registered new interface driver usbhid [ 21.137603] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 21.141135] PNP: PS/2 Controller [PNP0303:C1C4,PNP0f13:C1C5] at 0x60,0x64 irq 1,12 [ 21.146471] i8042.c: Detected active multiplexing controller, rev 1.1. [ 21.150765] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.154282] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 21.157737] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 21.161130] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 21.164458] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 21.167837] mice: PS/2 mouse device common for all mice [ 21.192936] input: AT Translated Set 2 keyboard as /class/input/input4 [ 21.206547] input: PC Speaker as /class/input/input5 [ 21.813842] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 21.859050] input: SynPS/2 Synaptics TouchPad as /class/input/input6 [ 21.865212] I2O subsystem v1.325 [ 21.868506] i2o: max drivers = 8 [ 21.871863] i2c /dev entries driver [ 21.875305] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected] [ 21.878663] Bluetooth: HCI USB driver ver 2.9 [ 21.882015] usbcore: registered new interface driver hci_usb [ 21.885371] Bluetooth: Virtual HCI driver ver 1.2 [ 21.888722] Bluetooth: HCI UART driver ver 2.2 [ 21.892027] Bluetooth: HCI H4 protocol initialized [ 21.895344] Bluetooth: HCI BCSP protocol initialized [ 21.898607] Bluetooth: Broadcom Blutonium firmware driver ver 1.1 [ 21.901870] usbcore: registered new interface driver bcm203x [ 21.905120] Bluetooth: Digianswer Bluetooth USB driver ver 0.8 [ 21.908412] usbcore: registered new interface driver bpa10x [ 21.911674] Bluetooth: BlueFRITZ! USB driver ver 1.1 [ 21.914960] usbcore: registered new interface driver bfusb [ 21.918266] EDAC MC: Ver: 2.0.1 Apr 23 2007 [ 21.921696] sdhci: Secure Digital Host Controller Interface driver [ 21.924992] sdhci: Copyright(c) Pierre Ossman [ 21.928271] sdhci: SDHCI controller found at 0000:02:04.4 [104c:8034] (rev 0) [ 21.931594] ACPI: PCI Interrupt 0000:02:04.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 21.935018] mmc0: SDHCI at 0xd001a000 irq 21 DMA [ 21.938358] mmc1: SDHCI at 0xd001b000 irq 21 DMA [ 21.941625] mmc2: SDHCI at 0xd001c000 irq 21 DMA [ 21.944776] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 21.947944] wbsd: Copyright(c) Pierre Ossman [ 21.951140] Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). [ 21.954622] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 21.966448] ALSA device list: [ 21.970637] #0: ATI IXP rev 2 with unknown codec at 0xd0804000, irq 17 [ 21.974928] oprofile: using NMI interrupt. [ 21.978125] Netfilter messages via NETLINK v0.30. [ 21.981298] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.984449] arp_tables: (C) 2002 David S. Miller [ 21.987591] TCP cubic registered [ 21.990761] NET: Registered protocol family 1 [ 21.994011] NET: Registered protocol family 10 [ 21.998306] lo: Disabled Privacy Extensions [ 22.001589] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 22.004813] IPv6 over IPv4 tunneling driver [ 22.008063] sit0: Disabled Privacy Extensions [ 22.013347] NET: Registered protocol family 17 [ 22.016425] Bluetooth: L2CAP ver 2.8 [ 22.019449] Bluetooth: L2CAP socket layer initialized [ 22.022505] Bluetooth: SCO (Voice Link) ver 0.5 [ 22.025564] Bluetooth: SCO socket layer initialized [ 22.028561] Bluetooth: RFCOMM socket layer initialized [ 22.031494] Bluetooth: RFCOMM TTY layer initialized [ 22.034385] Bluetooth: RFCOMM ver 1.8 [ 22.037221] Bluetooth: BNEP (Ethernet Emulation) ver 1.2 [ 22.040087] Bluetooth: BNEP filters: protocol multicast [ 22.042961] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 22.045900] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]> [ 22.048854] All bugs added by David S. Miller <[email protected]> [ 22.051817] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 22.054797] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 22.057828] ieee80211_crypt: registered algorithm 'NULL' [ 22.057830] ieee80211_crypt: registered algorithm 'WEP' [ 22.057833] ieee80211_crypt: registered algorithm 'CCMP' [ 22.057835] ieee80211_crypt: registered algorithm 'TKIP' [ 22.057840] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile ML-40 processors (version 2.00.00) [ 22.063645] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x4 [ 22.066713] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 [ 22.069724] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 [ 22.072678] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0xa [ 22.075578] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x16 [ 22.085069] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 22.109885] kjournald starting. Commit interval 5 seconds [ 22.112358] EXT3-fs: mounted filesystem with ordered data mode. [ 22.114912] VFS: Mounted root (ext3 filesystem) readonly. [ 22.117553] Freeing unused kernel memory: 232k freed [ 26.855026] EXT3 FS on hda7, internal journal [ 27.203479] kjournald starting. Commit interval 5 seconds [ 27.203715] EXT3 FS on hda8, internal journal [ 27.203720] EXT3-fs: mounted filesystem with ordered data mode. [ 27.242746] NTFS volume version 3.1. [ 27.333431] Adding 1791208k swap on /dev/hda6. Priority:-1 extents:1 across:1791208k [ 27.429880] Real Time Clock Driver v1.12ac [ 44.950180] PM: Writing back config space on device 0000:02:01.0 at offset c (was f7f70000, writing 0) [ 44.950188] PM: Writing back config space on device 0000:02:01.0 at offset b (was 3ed173b, writing 308b103c) [ 44.950207] PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4010) [ 44.950213] PM: Writing back config space on device 0000:02:01.0 at offset 2 (was 2000000, writing 2000003) [ 44.950220] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2b00000, writing 2b00006) [ 44.950226] PM: Writing back config space on device 0000:02:01.0 at offset 0 (was 3ed173b, writing 169c14e4) [ 45.191234] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 46.523323] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 46.523329] tg3: eth0: Flow control is on for TX and on for RX. [ 46.524845] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 54.775436] eth0: no IPv6 routers present
Quoted 7 lines · Mihai Donțu
Quoted 6 lines · you
Quoted 3 lines
Hi,
dmesg told me to report this to LKML.
And here is my report.
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
Have a nice day..
x 2 ;)
And again, from a different email address.
I would also like to take the opportunity to apologise to Gene Heskett
for spamming him :)
No problem other than the duplicates. Now if I could just reply to another thread without the server getting a belly ache, we would discuss serial, and usb-serial performance, but apparently that's a verbotun subject here on lkml.
Signature · 5 lines
Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) techtonic stress