Skip to contentSkip to conversation

m68knommu and vmlinux.lds.h RODATA

DISCUSSION Mathieu Desnoyers 2 participants 2 messages Apr 9, 2007 – Apr 10, 2007

lore
Share & tools
lore
#0 lore raw

Hi Greg,

Is there any particular reason why m68knommu does not use the RODATA linker script macro defined in asm-generic/vmlinux.lds.h ? It makes it rather inconvenient to add new RO sections to the kernel.

Regards,

Mathieu

Signature · 3 lines
Mathieu Desnoyers
Computer Engineering Ph.D. Student, Ecole Polytechnique de Montreal
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68
#1 lore raw

Hi Mathieu,

Quoted 3 lines · Mathieu Desnoyers

Is there any particular reason why m68knommu does not use the RODATA linker script macro defined in asm-generic/vmlinux.lds.h ? It makes it rather inconvenient to add new RO sections to the kernel.

This is going back some way, but this was the original commit message:

# --------------------------------------------
# 03/02/18 [email protected] 1.984
# [PATCH] use local RODATA setup for m68knommu linker script #
# This patch removes the use of the common RODATA define in the m68knommu

# architecture. It cannot be used the same way for the m68knommu target.
# For starters just inserting it here is syntactically wrong. All the read
# only parts are grouped into a single "text" segment, and this is the root
# cause of the problem. So for the m68knommu arch it makes sense to not
# use the generic RODATA setup, but to list them locally.

The problem looks to be the same today.

The current vmlinux.lds.S for m68knommu directs sections out to ROM or RAM depending on whether we are building to be run from some type of read only memory (ROM, FLASH, etc) or RAM. The RODATA macro as it stands doesn't allow that.

Regards
Greg

------------------------------------------------------------------------

Greg Ungerer  --  Chief Software Dude       EMAIL:     [email protected]
Secure Computing Corporation                PHONE:       +61 7 3435 2888
825 Stanley St,                             FAX:         +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com