statistics and calc bandwidth traffic using tc -s qdisc show
Hello,
Is there someone here who knows what does it means?
The Sent part.
[root@fw ~]# tc -s qdisc show |grep -A 2 "qdisc sfq 140: dev eth0"
qdisc sfq 140: dev eth0 parent 1:140 limit 128p quantum 1514b perturb 10sec
Sent 3155024 bytes 23249 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
[root@fw ~]# tc -s qdisc show |grep -A 2 "qdisc sfq 140: dev eth1"
qdisc sfq 140: dev eth1 parent 1:140 limit 128p quantum 1514b perturb 10sec
Sent 41141183 bytes 32560 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
I also would like to know if there is a way to calc the bandwidth traffic
(in kbit for example) of this customer using this informations.
Thank you for any help in advance.
Pablo Fernandes
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] statistics and calc bandwidth traffic using tc -s qdisc
[email protected] wrote on 16/05/2007 21:30:39:
Quoted 8 lines
Hello,
Is there someone here who knows what does it means?
The Sent part.
[root@fw ~]# tc -s qdisc show |grep -A 2 "qdisc sfq 140: dev eth0" qdisc sfq 140: dev eth0 parent 1:140 limit 128p quantum 1514b perturb
10sec
Quoted 5 lines
Sent 3155024 bytes 23249 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0
[root@fw ~]# tc -s qdisc show |grep -A 2 "qdisc sfq 140: dev eth1" qdisc sfq 140: dev eth1 parent 1:140 limit 128p quantum 1514b perturb
10sec
Quoted 8 lines
Sent 41141183 bytes 32560 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0
I also would like to know if there is a way to calc the bandwidth
traffic (in kbit for example) of this customer using this
informations.
Quoted 7 lines
Thank you for any help in advance.
Pablo Fernandes
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi,
the "Sent" parameter shows you the amount of data that fall into this qdisc. You can obtain the instant bandwith usage that falls into this qdisc parsing the "rate" parameter. In your example the rate is 0bit, that means 0 bits per second bandwith usage.
I must admit that the output from tc -s is a big pain !!
Best regards,
Eric Janz
--
ADVERTENCIA LEGAL
El contenido de este correo es confidencial y dirigido unicamente a su destinatario. Para acceder a su clausula de privacidad consulte http://www.barceloviajes.com/privacy
LEGAL ADVISORY
This message is confidential and intended only for the person or entity to which it is addressed. In order to read its privacy policy consult it at http://www.barceloviajes.com/privacy
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] statistics and calc bandwidth traffic using tc -s qdisc
In reply to Pablo Fernandes YahooI use tc-viewer . It does a great job.
http://snaj.ath.cx/tc-viewer/tc-viewer.html
Quoted 56 lines · Pablo Fernandes Yahoo
Hello,
Is there someone here who knows what does it means?
The Sent part.
[root@fw ~]# tc -s qdisc show |grep -A 2 "qdisc sfq 140: dev eth0"
qdisc sfq 140: dev eth0 parent 1:140 limit 128p quantum 1514b perturb 10sec
Sent 3155024 bytes 23249 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
[root@fw ~]# tc -s qdisc show |grep -A 2 "qdisc sfq 140: dev eth1"
qdisc sfq 140: dev eth1 parent 1:140 limit 128p quantum 1514b perturb 10sec
Sent 41141183 bytes 32560 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
I also would like to know if there is a way to calc the bandwidth traffic
(in kbit for example) of this customer using this informations.Thank you for any help in advance.
Pablo Fernandes
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Signature · 5 lines
[]'s Salatiel "O maior prazer do inteligente é bancar o idiota diante de um idiota que banca o inteligente".
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] statistics and calc bandwidth traffic using tc -s
In reply to Pablo Fernandes Yahooseems so cool ...
nice find ;-)
thanks for sharing ;-)
-nik
Quoted 63 lines · Salatiel Filho
I use tc-viewer . It does a great job.
http://snaj.ath.cx/tc-viewer/tc-viewer.htmlOn 5/16/07, Pablo Fernandes Yahoo <[email protected]> wrote:
Hello,Is there someone here who knows what does it means?
The Sent part.
[root@fw ~]# tc -s qdisc show |grep -A 2 "qdisc sfq 140: dev eth0"
qdisc sfq 140: dev eth0 parent 1:140 limit 128p quantum 1514b perturb 10sec
Sent 3155024 bytes 23249 pkt (dropped 0, overlimits 0
requeues 0)rate 0bit 0pps backlog 0b 0p requeues 0
[root@fw ~]# tc -s qdisc show |grep -A 2 "qdisc sfq 140: dev eth1"
qdisc sfq 140: dev eth1 parent 1:140 limit 128p quantum 1514b perturb 10sec
Sent 41141183 bytes 32560 pkt (dropped 0, overlimits 0
requeues 0)rate 0bit 0pps backlog 0b 0p requeues 0
I also would like to know if there is a way to calc the
bandwidth traffic (in kbit for example) of this
customer using this informations.Thank you for any help in advance.
Pablo Fernandes
Quoted 18 lines
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartcSignature · 9 lines
[]'s Salatiel "O maior prazer do inteligente é bancar o idiota diante de um idiota que banca o inteligente". _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] statistics and calc bandwidth traffic using tc -s qdisc
In reply to Pablo Fernandes YahooQuoted 10 lines · On Fri, 18 May 2007 18:37:22 +0300 Nikolay Kichukov <[email protected]> wrote:
seems so cool ...
nice find ;-)
thanks for sharing ;-)-nik
Quoted 2 lines · Salatiel Filho
I use tc-viewer . It does a great job.
http://snaj.ath.cx/tc-viewer/tc-viewer.html
Hi All
Is there any output that counts the number of dropped bytes (not packets) just as in "Sent" output?
Any patch perhaps??
Regards
Signature · 8 lines
Ethy H. Brito /"\ InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML +55 (12) 3797-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL S.J.Campos - Brasil / \ _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc