Nvidiafb issues on Inspiron 8100
Hi Antonino,
I am having the following issues on my Dell Inspiron 8100. They are not new but I just got around to report them.
With CONFIG_FB_NVIDIA_I2C I get 1600x1200 resolution but pixels "swarming" and it is unuseable. There are following messages in dmesg (note complaints from i2c):
May 24 00:53:29 core kernel: [ 0.000000] Kernel command line: ro root=LABEL=/ video=nvidiafb: 1600x1200MR atkbd.softrepeat selinux=0 May 24 00:53:29 core kernel: [ 12.876534] nvidiafb_setup START May 24 00:53:29 core kernel: [ 12.876608] nvidiafb_setup END May 24 00:53:29 core kernel: [ 12.877920] nvidiafb_probe START May 24 00:53:29 core kernel: [ 12.880624] nvidiafb: Device ID: 10de0112 May 24 00:53:29 core kernel: [ 13.105685] nvidiafb: EDID found from BUS1 May 24 00:53:29 core kernel: [ 13.182737] i2c-adapter i2c-1: unable to read EDID block. May 24 00:53:29 core kernel: [ 13.262611] Switched to high resolution mode on CPU 0 May 24 00:53:29 core kernel: [ 13.302898] i2c-adapter i2c-1: unable to read EDID block. May 24 00:53:29 core kernel: [ 13.422871] i2c-adapter i2c-1: unable to read EDID block. May 24 00:53:29 core kernel: [ 13.465822] nvidiafb: CRTC 1 is currently programmed for DFP May 24 00:53:29 core kernel: [ 13.465892] nvidiafb: Using DFP on CRTC 1 May 24 00:53:29 core kernel: [ 13.465960] nvidiafb: Panel size is 1600 x 1200 May 24 00:53:29 core kernel: [ 13.466025] nvidiafb: Panel is LVDS May 24 00:53:29 core kernel: [ 13.466982] nvidiafb: MTRR set to ON May 24 00:53:29 core kernel: [ 13.467060] nvidia_set_fbinfo START May 24 00:53:29 core kernel: [ 13.467135] fbcvt: 1600x1200@60: CVT Name - 1.920M3-R May 24 00:53:29 core kernel: [ 13.467204] nvidiafb_check_var START May 24 00:53:29 core kernel: [ 13.467266] nvidiafb_check_var END May 24 00:53:29 core kernel: [ 13.467332] nvidia_set_fbinfo END May 24 00:53:29 core kernel: [ 13.467391] nvidiafb_check_var START May 24 00:53:29 core kernel: [ 13.467452] nvidiafb_check_var END May 24 00:53:29 core kernel: [ 13.467513] nvidia_save_vga START May 24 00:53:29 core kernel: [ 13.467846] nvidia_save_vga END May 24 00:53:29 core kernel: [ 13.613205] nvidia_save_vga START May 24 00:53:29 core kernel: [ 13.613459] nvidia_save_vga END May 24 00:53:29 core kernel: [ 13.630281] nvidiafb_set_par START May 24 00:53:29 core kernel: [ 13.630293] nvidiafb: Flat panel dithering disabled May 24 00:53:29 core kernel: [ 13.630335] nvidia_write_regs START May 24 00:53:29 core kernel: [ 13.630523] nvidia_write_regs END May 24 00:53:29 core kernel: [ 13.630540] nvidiafb_set_par END May 24 00:53:29 core kernel: [ 13.630593] nvidiafb_setcolreg START May 24 00:53:29 core kernel: [ 13.630599] nvidiafb_setcolreg END .... May 24 00:53:29 core kernel: [ 13.636561] Console: switching to colour frame buffer device 200x75 .... May 24 00:53:29 core kernel: [ 13.728536] nvidiafb: PCI nVidia NV11 framebuffer (32MB @ 0xE0000000) May 24 00:53:29 core kernel: [ 13.729568] nvidiafb_probe END
If I disable CONFIG_FB_NVIDIA_I2C and enable CONFIG_FIRMWARE_EDID then it looks like I have a virtual screen with large font extending past physical. If I do:
fbset 1024x768-60 fbset 1600x1200-60
everything is back to normal.
And below a cosmetic patch for you...
Thank you.
Signature · 44 lines
Dmitry nvidiafb: tweak wording on module parameters descriptions Signed-off-by: Dmitry Torokhov <[email protected]> --- drivers/video/nvidia/nvidia.c | 9 ++++----- 1 files changed, 4 insertions(+), 5 deletions(-) Index: work/drivers/video/nvidia/nvidia.c =================================================================== --- work.orig/drivers/video/nvidia/nvidia.c +++ work/drivers/video/nvidia/nvidia.c @@ -1562,11 +1562,11 @@ MODULE_PARM_DESC(noaccel, "(default=0)"); module_param(noscale, int, 0); MODULE_PARM_DESC(noscale, - "Disables screen scaleing. (0 or 1=disable) " + "Disables screen scaling. (0 or 1=disable) " "(default=0, do scaling)"); module_param(paneltweak, int, 0); MODULE_PARM_DESC(paneltweak, - "Tweak display settings for flatpanels. " + "Tweak display settings for flat panels. " "(default=0, no tweaks)"); module_param(forceCRTC, int, 0); MODULE_PARM_DESC(forceCRTC, @@ -1574,13 +1574,12 @@ MODULE_PARM_DESC(forceCRTC, "fails. (0 or 1) (default=autodetect)"); module_param(vram, int, 0); MODULE_PARM_DESC(vram, - "amount of framebuffer memory to remap in MiB" + "Amount of framebuffer memory to remap in MiB" "(default=0 - remap entire memory)"); module_param(mode_option, charp, 0); MODULE_PARM_DESC(mode_option, "Specify initial video mode"); module_param(bpp, int, 0); -MODULE_PARM_DESC(bpp, "pixel width in bits" - "(default=8)"); +MODULE_PARM_DESC(bpp, "Pixel width in bits (default=8)"); #ifdef CONFIG_MTRR module_param(nomtrr, bool, 0); MODULE_PARM_DESC(nomtrr, "Disables MTRR support (0 or 1=disabled) "
Quoted 8 lines · Dmitry Torokhov
Hi Antonino,
I am having the following issues on my Dell Inspiron 8100. They are not new but I just got around to report them.
With
CONFIG_FB_NVIDIA_I2CI get 1600x1200 resolution but pixels "swarming" and it is unuseable. There are following messages in dmesg (note complaints from i2c):
Looks like an EDID block not accessible by i2c and only available through the BIOS. And it's probably broken too.
Can you #define DEBUG in drivers/video/fbmon.c, enable CONFIG_FIRMWARE_EDID, the post your dmesg?
For now, the best you can do is disable i2c support and add:
video=nvidiafb:1600x1200@60
in your boot line.
Tony
Quoted 13 lines · Antonino A. Daplas
Quoted 8 lines · Dmitry Torokhov
Hi Antonino,
I am having the following issues on my Dell Inspiron 8100. They are not new but I just got around to report them.
With
CONFIG_FB_NVIDIA_I2CI get 1600x1200 resolution but pixels "swarming" and it is unuseable. There are following messages in dmesg (note complaints from i2c):Looks like an EDID block not accessible by i2c and only available through the BIOS. And it's probably broken too.
Quoted 8 lines
Can you #define DEBUG in
drivers/video/fbmon.c, enableCONFIG_FIRMWARE_EDID, the post your dmesg?For now, the best you can do is disable i2c support and add:
video=nvidiafb:1600x1200@60
in your boot line.
You know, I disabled Nvidia's DDC stuff and enabled firmware EDID again and it started working fine, even without video=nvidiafb:1600x1200MR on the command line that I had for a long time.
So it works fine now. Would you oppode adding dmi check for inspiron 8100 to automatically disable nvidia i2c support at runtime?
Signature · 1 line
Dmitry
Quoted 5 lines · Dmitry Torokhov
Quoted 3 lines · Antonino A. Daplas
Quoted 2 lines · Dmitry Torokhov
Hi Antonino,
Quoted 7 lines
You know, I disabled Nvidia's DDC stuff and enabled firmware EDID again and it started working fine, even without video=nvidiafb:1600x1200MR on the command line that I had for a long time.
So it works fine now. Would you oppode adding dmi check for inspiron 8100 to automatically disable nvidia i2c support at runtime?
I have no problems with that.
Tony