Skip to contentSkip to conversation

2.6 drivers/net sctisys-sir clean up whitespace

PATCH New acripps 1 participant 1 message Jun 9, 2007

Subsystems (2)
lore
Share & tools
lore

acripps

author
#0 lore raw

PATCH 1/1 2.6 drivers/net sctisys-sir clean up whitespace

this patch is just a bit of a treat ... this removes the unneccesary whitespace from before newline characters ... this is purely cosmetic.

drivers/net/irda/actisys-sir.c +15 -15
index 9715ab5..8cacf74 100644
@@ -1,8 +1,8 @@
 /*********************************************************************
- *                
+ *
  * Filename:      actisys.c
  * Version:       1.1
- * Description:   Implementation for the ACTiSYS IR-220L and IR-220L+ 
+ * Description:   Implementation for the ACTiSYS IR-220L and IR-220L+
  *                dongles
  * Status:        Beta.
  * Authors:       Dag Brattli <[email protected]> (initially)
@@ -11,20 +11,20 @@
  * Created at:    Wed Oct 21 20:02:35 1998
  * Modified at:   Sun Oct 27 22:02:13 2002
  * Modified by:   Martin Diehl <[email protected]>
- * 
+ *
  *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
  *     Copyright (c) 1999 Jean Tourrilhes
  *     Copyright (c) 2002 Martin Diehl
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
  *     the License, or (at your option) any later version.
- *  
+ *
  *     Neither Dag Brattli nor University of Tromsø admit liability nor
- *     provide warranty for any of this software. This material is 
+ *     provide warranty for any of this software. This material is
  *     provided "AS-IS" and at no charge.
- *     
+ *
  ********************************************************************/
 
 /*
@@ -48,7 +48,7 @@
 
 #include "sir-dev.h"
 
-/* 
+/*
  * Define the timing of the pulses we send to the dongle (to reset it, and
  * to toggle speeds). Basically, the limit here is the propagation speed of
  * the signals through the serial port, the dongle being much faster.  Any
@@ -172,9 +172,9 @@ static int actisys_change_speed(struct sir_dev *dev, unsigned speed)
 	 * we are in known state (dongle default)
 	 */
 
-	/* 
+	/*
 	 * Now, we can set the speed requested. Send RTS pulses until we
-         * reach the target speed 
+         * reach the target speed
 	 */
 	for (i = 0; i < MAX_SPEEDS; i++) {
 		if (speed = baud_rates[i]) {
@@ -230,14 +230,14 @@ static int actisys_reset(struct sir_dev *dev)
 
 	/* Go back to normal mode */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
-	
+
 	dev->speed = 9600;	/* That's the default */
 
 	return 0;
 }
 
 MODULE_AUTHOR("Dag Brattli <[email protected]> - Jean Tourrilhes <[email protected]>");
-MODULE_DESCRIPTION("ACTiSYS IR-220L and IR-220L+ dongle driver");	
+MODULE_DESCRIPTION("ACTiSYS IR-220L and IR-220L+ dongle driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("irda-dongle-2"); /* IRDA_ACTISYS_DONGLE */
 MODULE_ALIAS("irda-dongle-3"); /* IRDA_ACTISYS_PLUS_DONGLE */

_______________________________________________
Kernel-janitors mailing list
[email protected]
https://lists.linux-foundation.org/mailman/listinfo/kernel-janitors