Please pull 'rtl8187' branch of wireless-2.6
Jeff,
This is the second round for the new mac80211-based rtl8187 driver. Michael and Ivo responded to many of the original review comments, and I have added a couple of patches to minimally address some remaining issues. Please look at the comments I added to the header blocks to see if that is satisfactory regarding explanation of the magic values in the driver.
This is a new driver, so obviously it would be targeted towards 2.6.23.
John
---
The following changes since commit 5ecd3100e695228ac5e0ce0e325e252c0f11806f:
Linus Torvalds (1):
Linux 2.6.22-rc4
are found in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git rtl8187
Ivo van Doorn (2):
Add 93cx6 eeprom library
eeprom_93cx6: Add comment for 1us delay after pulse
John W. Linville (2):
eeprom_93cx6: shorten pulse timing to match spec
rtl8187: add header blocks and indicate origin of magic values
Michael Wu (1):
Add rtl8187 wireless driver
MAINTAINERS | 10 + drivers/misc/Kconfig | 5 + drivers/misc/Makefile | 1 + drivers/misc/eeprom_93cx6.c | 241 +++++++++++ drivers/net/wireless/Kconfig | 12 + drivers/net/wireless/Makefile | 3 + drivers/net/wireless/rtl8187.h | 145 +++++++ drivers/net/wireless/rtl8187_dev.c | 731 +++++++++++++++++++++++++++++++ drivers/net/wireless/rtl8187_rtl8225.c | 745 ++++++++++++++++++++++++++++++++ drivers/net/wireless/rtl8187_rtl8225.h | 44 ++ drivers/net/wireless/rtl818x.h | 226 ++++++++++ include/linux/eeprom_93cx6.h | 72 +++ 12 files changed, 2235 insertions(+), 0 deletions(-) create mode 100644 drivers/misc/eeprom_93cx6.c create mode 100644 drivers/net/wireless/rtl8187.h create mode 100644 drivers/net/wireless/rtl8187_dev.c create mode 100644 drivers/net/wireless/rtl8187_rtl8225.c create mode 100644 drivers/net/wireless/rtl8187_rtl8225.h create mode 100644 drivers/net/wireless/rtl818x.h create mode 100644 include/linux/eeprom_93cx6.h
MAINTAINERS +10 -0
@@ -3044,6 +3044,16 @@ S: Maintained RISCOM8 DRIVER S: Orphan +RTL818X WIRELESS DRIVER +P: Michael Wu +M: flamingice-R9e9/[email protected] +P: Andrea Merello +M: [email protected] +L: [email protected] +W: http://linuxwireless.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git +S: Maintained + S3 SAVAGE FRAMEBUFFER DRIVER P: Antonino Daplas M: [email protected]
drivers/misc/Kconfig +5 -0
@@ -195,5 +195,10 @@ config BLINK output something to the screen like kexec kernels to give the user a visual indication that the kernel is doing something. +config EEPROM_93CX6 + tristate "EEPROM 93CX6 support" + ---help--- + This is a driver for the EEPROM chipsets 93c46 and 93c66. + The driver supports both read as well as write commands. endmenu
drivers/misc/Makefile +1 -0
@@ -15,3 +15,4 @@ obj-$(CONFIG_PHANTOM) += phantom.o obj-$(CONFIG_SGI_IOC4) += ioc4.o obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o +obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
drivers/misc/eeprom_93cx6.c new file +241 -0
241 lines not on this page · raw message
drivers/net/wireless/Kconfig +12 -0
@@ -539,6 +539,18 @@ config USB_ZD1201 To compile this driver as a module, choose M here: the module will be called zd1201. +config RTL8187 + tristate "Realtek 8187 USB support" + depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL + select EEPROM_93CX6 + ---help--- + This is a driver for RTL8187 based cards. + These are USB based chips found in cards such as: + + Netgear WG111v2 + + Thanks to Realtek for their support! + source "drivers/net/wireless/hostap/Kconfig" source "drivers/net/wireless/bcm43xx/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig"
drivers/net/wireless/Makefile +3 -0
@@ -44,3 +44,6 @@ obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o obj-$(CONFIG_USB_ZD1201) += zd1201.o obj-$(CONFIG_LIBERTAS_USB) += libertas/ + +rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o +obj-$(CONFIG_RTL8187) += rtl8187.o
drivers/net/wireless/rtl8187.h new file +145 -0
145 lines not on this page · raw message
drivers/net/wireless/rtl8187_dev.c new file +731 -0
731 lines not on this page · raw message
drivers/net/wireless/rtl8187_rtl8225.c new file +745 -0
745 lines not on this page · raw message
drivers/net/wireless/rtl8187_rtl8225.h new file +44 -0
44 lines not on this page · raw message
drivers/net/wireless/rtl818x.h new file +226 -0
226 lines not on this page · raw message
include/linux/eeprom_93cx6.h new file +72 -0
72 lines not on this page · raw message
Signature · 2 lines
John W. Linville [email protected]
Quoted 46 lines · John W. Linville
Jeff,
This is the second round for the new mac80211-based rtl8187 driver. Michael and Ivo responded to many of the original review comments, and I have added a couple of patches to minimally address some remaining issues. Please look at the comments I added to the header blocks to see if that is satisfactory regarding explanation of the magic values in the driver.
This is a new driver, so obviously it would be targeted towards 2.6.23.
John
---
The following changes since commit
5ecd3100e695228ac5e0ce0e325e252c0f11806f:
Linus Torvalds (1):Linux 2.6.22-rc4are found in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.gitrtl8187Ivo van Doorn (2):
Add 93cx6 eeprom library
eeprom_93cx6: Add comment for 1us delay after pulseJohn W. Linville (2):
eeprom_93cx6: shorten pulse timing to match spec
rtl8187: add header blocks and indicate origin of magic valuesMichael Wu (1):
Add rtl8187 wireless driverMAINTAINERS | 10 + drivers/misc/Kconfig | 5 + drivers/misc/Makefile | 1 + drivers/misc/eeprom_93cx6.c | 241 +++++++++++ drivers/net/wireless/Kconfig | 12 + drivers/net/wireless/Makefile | 3 + drivers/net/wireless/rtl8187.h | 145 +++++++ drivers/net/wireless/rtl8187_dev.c | 731 +++++++++++++++++++++++++++++++ drivers/net/wireless/rtl8187_rtl8225.c | 745 ++++++++++++++++++++++++++++++++ drivers/net/wireless/rtl8187_rtl8225.h | 44 ++ drivers/net/wireless/rtl818x.h | 226 ++++++++++ include/linux/eeprom_93cx6.h | 72 +++
Quoted 8 lines
12 files changed, 2235 insertions(+), 0 deletions(-) create mode 100644 drivers/misc/eeprom_93cx6.c create mode 100644 drivers/net/wireless/rtl8187.h create mode 100644 drivers/net/wireless/rtl8187_dev.c create mode 100644 drivers/net/wireless/rtl8187_rtl8225.c create mode 100644 drivers/net/wireless/rtl8187_rtl8225.h create mode 100644 drivers/net/wireless/rtl818x.h create mode 100644 include/linux/eeprom_93cx6.h
pulled into #upstream (2.6.23)