PQ questions
Hi all,
First, let me say I've been most impressed with how quickly and professionally people on this list ask and answer questions.
Next, let me say that with which I need help is properly configuring strict PQ, and gathering certain stats. Specifically:
- I need to create a priority queue with four queues (let's say they are of high, medium, normal, and low priority)
- I need to use tc filters such that:
- EF (0xB8) goes to the high priority queue
- AF21 (0x50) goes to the medium priority queue
- AF11 (0x28) goes to the normal priority queue, and
- BE traffic goes to the low priority queue
- For stat collection, I need to see:
- how many bytes and packets are in each of the four queues
- My configuration thus far is:
tc qdisc add dev eml_test root handle 1: prio bands 4 priomap 0 1 2 3
tc filter add dev eml_test parent 1:0 prio 1 protocol ip u32 match ip tos 0xb8 0xff flowid 1:1
tc filter add dev eml_test parent 1:0 prio 2 protocol ip u32 match ip tos 0x80 0xff flowid 1:2
tc filter add dev eml_test parent 1:0 prio 3 protocol ip u32 match ip tos 0x50 0xff flowid 1:3
tc filter add dev eml_test parent 1:0 prio 4 protocol ip u32 match ip tos 0x00 0xff flowid 1:4
__________
My questions are:
- What if anything is missing/requiring change in my config given the stated requirements?
- What if any command should I use to view how many bytes and packets are in each of the four queues?
Any help would be most appreciated.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc