Skip to contentSkip to conversation

USB card reader and HAL

DISCUSSION DervishD 2 participants 3 messages Jun 28, 2007 – Jun 29, 2007

lore
Share & tools
lore

DervishD

author
#0 lore raw

Hi all :)

I have a new card reader (internal) but I've tested with my old one
too: the same happens. I have a do-it-yourself linux box, self compiled kernel 2.6.19.5 (by now).

When I insert a card in the reader, it is not detected, no udev
event is generated and I have to do things like "hdparm -z /dev/sda" to "probe" the card. Moreover, I have to do the same when removing the card or the /dev/sdaX nodes are not deleted.

Is HAL the only way of making it work? Is there any CONFIG_ thing
I've forgotten in my kernel?

I've tested with Ubuntu and it works perfectly, and that's why I
think this may be HAL related (I don't have HAL installed, Ubuntu has).

Thanks in advance :)

Raúl Núñez de Arenas Coronado

Signature · 2 lines
Linux Registered User 88736 | http://www.dervishd.net
It's my PC and I'll cry if I want to... RAmen!
#1 lore raw
Quoted 9 lines · DervishD

I have a new card reader (internal) but I've tested with my old one
too: the same happens. I have a do-it-yourself linux box, self compiled kernel 2.6.19.5 (by now).

When I insert a card in the reader, it is not detected, no udev
event is generated and I have to do things like "hdparm -z /dev/sda" to "probe" the card. Moreover, I have to do the same when removing the card or the /dev/sdaX nodes are not deleted.

Quoted 5 lines

Is HAL the only way of making it work? Is there any CONFIG_ thing
I've forgotten in my kernel?

I've tested with Ubuntu and it works perfectly, and that's why I
think this may be HAL related (I don't have HAL installed, Ubuntu has).

You have to open() the device node to trigger events from the kernel, the kernel itself will not do that for you. HAL polls the device every few seconds.

Kay

author
#2 lore raw

Hi Kay :)

* Kay Sievers <[email protected]> dixit:

Quoted 6 lines · DervishD
Quoted 5 lines

When I insert a card in the reader, it is not detected, no udev
event is generated and I have to do things like "hdparm -z /dev/sda" to "probe" the card. Moreover, I have to do the same when removing the card or the /dev/sdaX nodes are not deleted.

Quoted 6 lines
Quoted 2 lines

Is HAL the only way of making it work? Is there any CONFIG_ thing
I've forgotten in my kernel?

You have to open() the device node to trigger events from the kernel, the kernel itself will not do that for you. HAL polls the device every few seconds.

So, opening the node and checking for ENOMEDIUM is the only
solution... Polling looks like a waste of time, and given that I use the reader once a month or so, HAL will be a waste of resources. I'll resort to manually do "hdparm -z" (or something similar) when I need to insert or remove a card.

Thanks for confirming, Kay :))

Raúl Núñez de Arenas Coronado

Signature · 2 lines
Linux Registered User 88736 | http://www.dervishd.net
It's my PC and I'll cry if I want to... RAmen!