Skip to contentSkip to conversation

default setting not fully working with new ALSA device

DISCUSSION Peter Matthias 3 participants 5 messages Jul 4, 2007 – Jul 10, 2007 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hello,

I have got a 690G board with following lspic -nv output:

01:05.2 0403: 1002:7919
Subsystem: 1002:7919
Flags: bus master, fast devsel, latency 64, IRQ 19 Memory at fe9e8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-

With the default setting, microphone does not work. With module parameter "modprobe -i snd-hda-intel model=6stack-dig" microphone works well. Please add to default setting. It was written in Linux Kernel documentation to report this issue here.

Thank you,
Peter

#1 lore raw

Could you post the output from
http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh ? This script will give us more detailed information on what sound chip it is. We will also need to know the brand of board, for the driver file.

Thanks,

Tobin

Quoted 23 lines · Peter Matthias

Hello,

I have got a 690G board with following lspic -nv output:

01:05.2 0403: 1002:7919
Subsystem: 1002:7919
Flags: bus master, fast devsel, latency 64, IRQ 19 Memory at fe9e8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-

With the default setting, microphone does not work. With module parameter "modprobe -i snd-hda-intel model=6stack-dig" microphone works well. Please add to default setting. It was written in Linux Kernel documentation to report this issue here.

Thank you,
Peter
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Signature · 1 line
Tobin Davis <[email protected]>
#3 lore raw
In reply to a message not in the archive

Try this patch. It adds support for both ALC883 and HDMI ports on your system.

Summary: HDA-Intel - Add support for MSI K9AGM2-FIH motherboard

This patch adds support for the MSI K9AGM2-FIH on-board audio.

Signed off by
Tobin Davis <[email protected]>

Quoted 48 lines · Peter Matthias

The Board is a MSI K9AGM2-FIH, Sockel AM2, ATI RS690G, mATX, PCIe

The script gave following output:
"Your ALSA information is located at http://pastebin.ca/604529"

Other drivers are statically linked in my kernel.

Thank you for your work! In case of any questions, contact me.

Peter

Am Mittwoch, 4. Juli 2007 schrieben Sie:

Quoted 33 lines

Could you post the output from
http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh ? This script will give us more detailed information on what sound chip it is. We will also need to know the brand of board, for the driver file.

Thanks,

Tobin

Quoted 23 lines · Peter Matthias

Hello,

I have got a 690G board with following lspic -nv output:

01:05.2 0403: 1002:7919
Subsystem: 1002:7919
Flags: bus master, fast devsel, latency 64, IRQ 19 Memory at fe9e8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-

With the default setting, microphone does not work. With module parameter "modprobe -i snd-hda-intel model=6stack-dig" microphone works well. Please add to default setting. It was written in Linux Kernel documentation to report this issue here.

Thank you,
Peter
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Signature · 1 line
Tobin Davis <[email protected]>
#4 lore raw

At Thu, 05 Jul 2007 10:42:45 -0700,

Quoted 10 lines · Tobin Davis

Try this patch. It adds support for both ALC883 and HDMI ports on your system.

Summary: HDA-Intel - Add support for MSI K9AGM2-FIH motherboard

This patch adds support for the MSI K9AGM2-FIH on-board audio.

Signed off by
Tobin Davis <[email protected]>

The patch is missing?

Takashi

Quoted 59 lines · Peter Matthias
Quoted 49 lines

The Board is a MSI K9AGM2-FIH, Sockel AM2, ATI RS690G, mATX, PCIe

The script gave following output:
"Your ALSA information is located at http://pastebin.ca/604529"

Other drivers are statically linked in my kernel.

Thank you for your work! In case of any questions, contact me.

Peter

Am Mittwoch, 4. Juli 2007 schrieben Sie:

Quoted 33 lines

Could you post the output from
http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh ? This script will give us more detailed information on what sound chip it is. We will also need to know the brand of board, for the driver file.

Thanks,

Tobin

Quoted 23 lines · Peter Matthias

Hello,

I have got a 690G board with following lspic -nv output:

01:05.2 0403: 1002:7919
Subsystem: 1002:7919
Flags: bus master, fast devsel, latency 64, IRQ 19 Memory at fe9e8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-

With the default setting, microphone does not work. With module parameter "modprobe -i snd-hda-intel model=6stack-dig" microphone works well. Please add to default setting. It was written in Linux Kernel documentation to report this issue here.

Thank you,
Peter
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Signature · 5 lines
Tobin Davis <[email protected]>
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
#5 lore raw

How odd. it didn't get attached. Here it is.

Quoted 77 lines · Takashi Iwai

At Thu, 05 Jul 2007 10:42:45 -0700,

Quoted 10 lines · Tobin Davis

Try this patch. It adds support for both ALC883 and HDMI ports on your system.

Summary: HDA-Intel - Add support for MSI K9AGM2-FIH motherboard

This patch adds support for the MSI K9AGM2-FIH on-board audio.

Signed off by
Tobin Davis <[email protected]>

The patch is missing?

Takashi

Quoted 59 lines · Peter Matthias
Quoted 49 lines

The Board is a MSI K9AGM2-FIH, Sockel AM2, ATI RS690G, mATX, PCIe

The script gave following output:
"Your ALSA information is located at http://pastebin.ca/604529"

Other drivers are statically linked in my kernel.

Thank you for your work! In case of any questions, contact me.

Peter

Am Mittwoch, 4. Juli 2007 schrieben Sie:

Quoted 33 lines

Could you post the output from
http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh ? This script will give us more detailed information on what sound chip it is. We will also need to know the brand of board, for the driver file.

Thanks,

Tobin

Quoted 23 lines · Peter Matthias

Hello,

I have got a 690G board with following lspic -nv output:

01:05.2 0403: 1002:7919
Subsystem: 1002:7919
Flags: bus master, fast devsel, latency 64, IRQ 19 Memory at fe9e8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-

With the default setting, microphone does not work. With module parameter "modprobe -i snd-hda-intel model=6stack-dig" microphone works well. Please add to default setting. It was written in Linux Kernel documentation to report this issue here.

Thank you,
Peter
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Signature · 5 lines
Tobin Davis <[email protected]>
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Signature · 1 line
Tobin Davis <[email protected]>
pci/hda/patch_realtek.c +1 -0
@@ -6381,6 +6381,7 @@
 	SND_PCI_QUIRK(0x1462, 0x7187, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7250, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x7280, "MSI", ALC883_6ST_DIG),
+	SND_PCI_QUIRK(0x1462, 0x7327, "MSI", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x0579, "MSI", ALC883_TARGA_2ch_DIG),
 	SND_PCI_QUIRK(0x1462, 0x3729, "MSI S420", ALC883_TARGA_DIG),
 	SND_PCI_QUIRK(0x1462, 0x3ef9, "MSI", ALC883_TARGA_DIG),
pci/hda/patch_atihdmi.c +1 -0
@@ -172,6 +172,7 @@
  */
 struct hda_codec_preset snd_hda_preset_atihdmi[] = {
 	{ .id = 0x1002793c, .name = "ATI RS600 HDMI", .patch = patch_atihdmi },
+	{ .id = 0x10027919, .name = "ATI RS600 HDMI", .patch = patch_atihdmi },
 	{ .id = 0x1002791a, .name = "ATI RS690/780 HDMI", .patch = patch_atihdmi },
 	{ .id = 0x1002aa01, .name = "ATI R600 HDMI", .patch = patch_atihdmi },
 	{} /* terminator */

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel