x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata
PATCH 1/1 x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata
Andi, please consider applying for 2.6.23. Applies on top of the Calgary update I just sent out ("Calgary: more updates for 2.6.23").
This patch introduces struct pci_sysdata to x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it.
This lays the groundwork for having other users of sysdata, such as the PCI domains work.
The Calgary bits are tested, the NUMA bits just look ok.
--- arch/i386/pci/acpi.c | 32 +++++++++++++++++++++++++++----- arch/i386/pci/common.c | 13 ++++++++++++- arch/x86_64/kernel/pci-calgary.c | 29 +++++++++++++++-------------- arch/x86_64/kernel/tce.c | 12 ++++-------- arch/x86_64/pci/k8-bus.c | 6 +++++- include/asm-i386/pci.h | 5 +++++ include/asm-i386/topology.h | 2 +- include/asm-x86_64/pci.h | 19 +++++++++++++++++++ include/asm-x86_64/topology.h | 2 +- 9 files changed, 89 insertions(+), 31 deletions(-)
arch/i386/pci/acpi.c +27 -5
@@ -8,20 +8,42 @@struct pci_bus *__devinit pci_acpi_scan_root (struct acpi_device *device,int domain,int busnum) {struct pci_bus *bus; +struct pci_sysdata *sd; +int pxm; + +/* Allocate per-root-bus (not per bus) arch-specific data. +* TODO: leak; this memory is never freed. +* It's arguable whether it's worth the trouble to care. +*/ + sd =kzalloc (sizeof (*sd),GFP_KERNEL ); +if (!sd) { +printk (KERN_ERR "PCI: OOM, not probing PCI bus %02x\n" , busnum); +return NULL ; + }if (domain !=0 ) {printk (KERN_WARNING "PCI: Multiple domains not supported\n" ); +kfree (sd);return NULL ; } - bus =pcibios_scan_root (busnum); + sd->node =-1 ; + + pxm =acpi_get_pxm (device->handle); +#ifdef CONFIG_ACPI_NUMA +if (pxm >=0 ) + sd->node =pxm_to_node (pxm); +#endif + + bus =pci_scan_bus_parented (NULL , busnum, &pci_root_ops, sd); +if (!bus) +kfree (sd); +#ifdef CONFIG_ACPI_NUMA if (bus !=NULL ) { -int pxm =acpi_get_pxm (device->handle);if (pxm >=0 ) { - bus->sysdata = (void *)(unsigned long )pxm_to_node (pxm); -printk ("bus %d -> pxm %d -> node %ld\n" , - busnum, pxm, (long )(bus->sysdata)); +printk ("bus %d -> pxm %d -> node %d\n" , + busnum, pxm, sd->node); } }#endif
arch/i386/pci/common.c +12 -1
@@ -293,6 +293,7 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {struct pci_bus *__devinit pcibios_scan_root (int busnum) {struct pci_bus *bus =NULL ; +struct pci_sysdata *sd;dmi_check_system (pciprobe_dmi_table);
@@ -303,9 +304,19 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum) } } +/* Allocate per-root-bus (not per bus) arch-specific data. +* TODO: leak; this memory is never freed. +* It's arguable whether it's worth the trouble to care. +*/ + sd =kzalloc (sizeof (*sd),GFP_KERNEL ); +if (!sd) { +printk (KERN_ERR "PCI: OOM, not probing PCI bus %02x\n" , busnum); +return NULL ; + } +printk (KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n" , busnum); -return pci_scan_bus_parented (NULL , busnum, &pci_root_ops,NULL ); +return pci_scan_bus_parented (NULL , busnum, &pci_root_ops, sd); }extern u8 pci_cache_line_size;
arch/x86_64/kernel/pci-calgary.c +15 -14
@@ -375,7 +375,7 @@ static inline struct iommu_table *find_iommu_table(struct device *dev)else pbus = pdev->bus; - tbl = pbus->self->sysdata; + tbl =pci_iommu (pbus);BUG_ON (pdev->bus->parent && (tbl->it_busno != pdev->bus->parent->number));
@@ -718,7 +718,7 @@ static void __init calgary_reserve_mem_region(struct pci_dev *dev, u64 start, limit++; numpages = ((limit - start) >>PAGE_SHIFT ); -iommu_range_reserve (dev->sysdata, start, numpages); +iommu_range_reserve (pci_iommu (dev->bus), start, numpages); }static void __init calgary_reserve_peripheral_mem_1 (struct pci_dev *dev)
@@ -726,7 +726,7 @@ static void __init calgary_reserve_peripheral_mem_1(struct pci_dev *dev)void __iomem *target;u64 low, high, sizelow;u64 start, limit; -struct iommu_table *tbl = dev->sysdata; +struct iommu_table *tbl =pci_iommu (dev->bus);unsigned char busnum = dev->bus->number;void __iomem *bbar = tbl->bbar;
@@ -750,7 +750,7 @@ static void __init calgary_reserve_peripheral_mem_2(struct pci_dev *dev)u32 val32;u64 low, high, sizelow, sizehigh;u64 start, limit; -struct iommu_table *tbl = dev->sysdata; +struct iommu_table *tbl =pci_iommu (dev->bus);unsigned char busnum = dev->bus->number;void __iomem *bbar = tbl->bbar;
@@ -786,7 +786,7 @@ static void __init calgary_reserve_regions(struct pci_dev *dev) {unsigned int npages;u64 start; -struct iommu_table *tbl = dev->sysdata; +struct iommu_table *tbl =pci_iommu (dev->bus);/* reserve EMERGENCY_PAGES from bad_dma_address and up */ iommu_range_reserve (tbl, bad_dma_address,EMERGENCY_PAGES );
@@ -820,7 +820,7 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar)if (ret)return ret; - tbl = dev->sysdata; + tbl =pci_iommu (dev->bus); tbl->it_base = (unsigned long )bus_info[dev->bus->number].tce_space;tce_free (tbl,0 , tbl->it_size);
@@ -857,7 +857,7 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar)static void __init calgary_free_bus (struct pci_dev *dev) {u64 val64; -struct iommu_table *tbl = dev->sysdata; +struct iommu_table *tbl =pci_iommu (dev->bus);void __iomem *target;unsigned int bitmapsz;
@@ -872,7 +872,8 @@ static void __init calgary_free_bus(struct pci_dev *dev) tbl->it_map =NULL ;kfree (tbl); - dev->sysdata =NULL ; + +set_pci_iommu (dev->bus,NULL );/* Can't free bootmem allocated memory after system is up :-( */ bus_info[dev->bus->number].tce_space =NULL ;
@@ -945,7 +946,7 @@ static void calioc2_dump_error_regs(struct iommu_table *tbl)static void calgary_watchdog (unsigned long data) {struct pci_dev *dev = (struct pci_dev *)data; -struct iommu_table *tbl = dev->sysdata; +struct iommu_table *tbl =pci_iommu (dev->bus);void __iomem *bbar = tbl->bbar;u32 val32;void __iomem *target;
@@ -1043,7 +1044,7 @@ static void __init calgary_enable_translation(struct pci_dev *dev)struct iommu_table *tbl; busnum = dev->bus->number; - tbl = dev->sysdata; + tbl =pci_iommu (dev->bus); bbar = tbl->bbar;/* enable TCE in PHB Config Register */
@@ -1075,7 +1076,7 @@ static void __init calgary_disable_translation(struct pci_dev *dev)struct iommu_table *tbl; busnum = dev->bus->number; - tbl = dev->sysdata; + tbl =pci_iommu (dev->bus); bbar = tbl->bbar;/* disable TCE in PHB Config Register */
@@ -1093,7 +1094,7 @@ static void __init calgary_disable_translation(struct pci_dev *dev)static void __init calgary_init_one_nontraslated (struct pci_dev *dev) {pci_dev_get (dev); - dev->sysdata =NULL ; +set_pci_iommu (dev->bus,NULL );/* is the device behind a bridge? */ if (dev->bus->parent)
@@ -1125,7 +1126,7 @@ static int __init calgary_init_one(struct pci_dev *dev) }else dev->bus->self = dev; - tbl = dev->sysdata; + tbl =pci_iommu (dev->bus); tbl->chip_ops->handle_quirks (tbl, dev);calgary_enable_translation (dev);
@@ -1522,7 +1523,7 @@ static void __init calgary_fixup_one_tce_space(struct pci_dev *dev)unsigned int npages;int i; - tbl = dev->sysdata; + tbl =pci_iommu (dev->bus);for (i =0 ; i <4 ; i++) {struct resource *r = &dev->resource[PCI_BRIDGE_RESOURCES + i];
arch/x86_64/kernel/tce.c +4 -8
@@ -136,9 +136,9 @@ int build_tce_table(struct pci_dev *dev, void __iomem *bbar)struct iommu_table *tbl;int ret; -if (dev->sysdata) { -printk (KERN_ERR "Calgary: dev %p has sysdata %p\n" , - dev, dev->sysdata); +if (pci_iommu (dev->bus)) { +printk (KERN_ERR "Calgary: dev %p has sysdata->iommu %p\n" , + dev,pci_iommu (dev->bus));BUG (); }
@@ -155,11 +155,7 @@ int build_tce_table(struct pci_dev *dev, void __iomem *bbar) tbl->bbar = bbar; -/* -* NUMA is already using the bus's sysdata pointer, so we use -* the bus's pci_dev's sysdata instead. -*/ - dev->sysdata = tbl; +set_pci_iommu (dev->bus, tbl);return 0 ;
arch/x86_64/pci/k8-bus.c +5 -1
@@ -59,6 +59,8 @@ fill_mp_bus_to_cpumask(void) j <=SUBORDINATE_LDT_BUS_NUMBER (ldtbus); j++) {struct pci_bus *bus; +struct pci_sysdata *sd; +long node =NODE_ID (nid);/* Algorithm a bit dumb, but it shouldn't matter here */
@@ -67,7 +69,9 @@ fill_mp_bus_to_cpumask(void)continue ;if (!node_online (node)) node =0 ; - bus->sysdata = (void *)node; + + sd = bus->sysdata; + sd->node = node; } } }
include/asm-i386/pci.h +5 -0
@@ -3,6 +3,11 @@#ifdef __KERNEL__ + +struct pci_sysdata { +int node;/* NUMA node */ +}; +#include <linux/mm.h> /* for struct page */ /* Can be used to override the logic in pci_scan_bus for skipping
include/asm-i386/topology.h +1 -1
@@ -67,7 +67,7 @@ static inline int node_to_first_cpu(int node)return first_cpu (mask); } -#define pcibus_to_node (bus) ((long) (bus)->sysdata) +#define pcibus_to_node (bus) ((struct pci_sysdata *)((bus)->sysdata))->node#define pcibus_to_cpumask (bus) node_to_cpumask(pcibus_to_node(bus))/* sched_domains SD_NODE_INIT for NUMAQ machines */
include/asm-x86_64/pci.h +19 -0
@@ -5,6 +5,25 @@#ifdef __KERNEL__ +struct pci_sysdata { +int node;/* NUMA node */ +void * iommu;/* IOMMU private data */ +}; + +#ifdef CONFIG_CALGARY_IOMMU +static inline void *pci_iommu (struct pci_bus *bus) +{ +struct pci_sysdata *sd = bus->sysdata; +return sd->iommu; +} + +static inline void set_pci_iommu (struct pci_bus *bus,void *val) +{ +struct pci_sysdata *sd = bus->sysdata; + sd->iommu = val; +} +#endif /* CONFIG_CALGARY_IOMMU */ +#include <linux/mm.h> /* for struct page */ /* Can be used to override the logic in pci_scan_bus for skipping
include/asm-x86_64/topology.h +1 -1
@@ -22,7 +22,7 @@ extern int __node_distance(int, int);#define parent_node (node) (node)#define node_to_first_cpu (node) (first_cpu(node_to_cpumask[node]))#define node_to_cpumask (node) (node_to_cpumask[node]) -#define pcibus_to_node (bus) ((long)(bus->sysdata)) +#define pcibus_to_node (bus) ((struct pci_sysdata *)((bus)->sysdata))->node#define pcibus_to_cpumask (bus) node_to_cpumask(pcibus_to_node(bus));#define numa_node_id () read_pda(nodenumber)
Signature · 1 line
1.5.2
Quoted 6 lines · Muli Ben-Yehuda
Andi, please consider applying for 2.6.23. Applies on top of the Calgary update I just sent out ("Calgary: more updates for 2.6.23").
This patch introduces struct
pci_sysdatato x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it.
Quoted 7 lines
This lays the groundwork for having other users of sysdata, such as the PCI domains work.
The Calgary bits are tested, the NUMA bits just look ok.
Signed-off-by Jeff Garzik <[email protected]>Signed-off-by Muli Ben-Yehuda <[email protected]>
how about acpi=off in x86_64 system?
You maybe update this with
http://lkml.org/lkml/2007/6/29/246
Andrew already sent that to Andi for 2.6.23
YH
Quoted 10 lines · Yinghai Lu
Quoted 9 lines · Muli Ben-Yehuda
Andi, please consider applying for 2.6.23. Applies on top of the Calgary update I just sent out ("Calgary: more updates for 2.6.23").
This patch introduces struct
pci_sysdatato x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it.This lays the groundwork for having other users of sysdata, such as the PCI domains work.
Quoted 6 lines
Quoted 4 lines
The Calgary bits are tested, the NUMA bits just look ok.
Signed-off-by Jeff Garzik <[email protected]>Signed-off-by Muli Ben-Yehuda <[email protected]>how about acpi=off in
x86_64system?
Are you asking if it works? my main victim machines don't boot at all with acpi=off regardless of this patch so I can't test it there. I'll try to find a sacrifical Opteron machine to try it on.
Quoted 3 lines
You maybe update this with
http://lkml.org/lkml/2007/6/29/246
Andrew already sent that to Andi for 2.6.23
It's in Andi's "need more review" list, so I guess it depends on Andi's preference which (if any) of these patches will go in first. Andi?
Cheers,
Muli
Quoted 10 lines · Muli Ben-Yehuda
Andi, please consider applying for 2.6.23. Applies on top of the Calgary update I just sent out ("Calgary: more updates for 2.6.23").
This patch introduces struct
pci_sysdatato x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it.This lays the groundwork for having other users of sysdata, such as the PCI domains work.
The Calgary bits are tested, the NUMA bits just look ok.
I very much start to dislike the untyped "sysdata"... I much rather have separate fields for the different uses (like a IOMMU field) that aren't going to share ever. Possibly even typed, but for IOMMU that may be tricky....
Quoted 10 lines · Arjan van de Ven
Quoted 9 lines · Muli Ben-Yehuda
Andi, please consider applying for 2.6.23. Applies on top of the Calgary update I just sent out ("Calgary: more updates for 2.6.23").
This patch introduces struct
pci_sysdatato x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it.This lays the groundwork for having other users of sysdata, such as the PCI domains work.
Quoted 6 lines
Quoted 1 line
The Calgary bits are tested, the NUMA bits just look ok.
I very much start to dislike the untyped "sysdata"... I much rather have separate fields for the different uses (like a IOMMU field) that aren't going to share ever. Possibly even typed, but for IOMMU that may be tricky....
Could you elaborate on what you mean here?
If you mean instead of hanging a pci_sysdata off of struct pci_bus, hang a 'void *iommu' and an 'int node' directly off of the pci_bus, that looks like a lot of churn (most architecture use sysdata as an opaque pointer to an arch specific structure) and bloat (you would need to hang off pci_bus everything that is in every arch's use of sysdata!) for very little type safety.
Cheers,
Muli
Quoted 18 lines · Muli Ben-Yehuda
Quoted 10 lines · Arjan van de Ven
Quoted 9 lines · Muli Ben-Yehuda
Andi, please consider applying for 2.6.23. Applies on top of the Calgary update I just sent out ("Calgary: more updates for 2.6.23").
This patch introduces struct
pci_sysdatato x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it.This lays the groundwork for having other users of sysdata, such as the PCI domains work.
Quoted 6 lines
Quoted 1 line
The Calgary bits are tested, the NUMA bits just look ok.
I very much start to dislike the untyped "sysdata"... I much rather have separate fields for the different uses (like a IOMMU field) that aren't going to share ever. Possibly even typed, but for IOMMU that may be tricky....
Quoted 4 lines
Could you elaborate on what you mean here?
If you mean instead of hanging a
pci_sysdataoff of structpci_bus, hang a 'void *iommu' and an 'int node' directly off of thepci_bus,
yes that is what I mean.
Quoted 2 lines
that looks like a lot of churn (most architecture use sysdata as an opaque pointer to an arch specific structure) and bloat (you would
it's only a few bytes per pci device/bus. not all that bad for having something which involves splitting a shared pointer into logical users.
(and heck, if you really really are worried we could make it a union for some of them, although that defeats the "split is safer" benefit)
Signature · 2 lines
if you want to mail me at work (you don't), use arjan (at) linux.intel.com Test the interaction between Linux and your BIOS via http://www.linuxfirmwarekit.org
Quoted 17 lines · Arjan van de Ven
Quoted 10 lines
Quoted 4 lines
I very much start to dislike the untyped "sysdata"... I much rather have separate fields for the different uses (like a IOMMU field) that aren't going to share ever. Possibly even typed, but for IOMMU that may be tricky....
Could you elaborate on what you mean here?
If you mean instead of hanging a
pci_sysdataoff of structpci_bus, hang a 'void *iommu' and an 'int node' directly off of thepci_bus,yes that is what I mean.
Quoted 3 lines
that looks like a lot of churn (most architecture use sysdata as an opaque pointer to an arch specific structure) and bloat (you would
Quoted 7 lines
it's only a few bytes per pci device/bus. not all that bad for having something which involves splitting a shared pointer into logical users.
(and heck, if you really really are worried we could make it a union for some of them, although that defeats the "split is safer" benefit)
It's not just bloat and code churn, I also don't like teaching every architecture about every other architecture's use of sysdata, which is inherently architecture specific. I think the benefits of modularity here outweigh the benefits of a little type safety.
Cheers,
Muli