tc filter add ... fw ... action drop
Subsystems (2)
Hi.
Is it a bug that:
# tc filter add dev eth0 parent 1: protocol ip prio 0 handle 0xfffffff
fw police rate 1 burst 1 mpu 0 mtu 1 action drop
^^^^^^^^^^^
creates a filter that looks like: # tc filter ls dev eth0
filter parent 1: protocol ip pref 49152 fw
filter parent 1: protocol ip pref 49152 fw handle 0xfffffff police 0x1
rate 0bit burst 0b mtu 1b action reclassify
^^^^^^^^^^^^^^^^^
ref -543190236 bind 4(which reclassifies and thus lets 0xfffffff-marked packets through).
I'm pretty sure this used to work under 2.4.x (though I no longer have a 2.4 box to test with), but it hasn't worked on any of the 2.6.x kernels I've tried (with both iproute2-ss060323 and 070710).
I haven't been able to find anything that suggests this change is intentional. If it's not immediately obvious to anyone what the problem is, I could try to track it down.
-- ams
Quoted 16 lines · Abhijit Menon-Sen
Hi.
Is it a bug that:
# tc filter add dev eth0 parent 1: protocol ip prio 0 handle 0xfffffff fw police rate 1 burst 1 mpu 0 mtu 1 action drop ^^^^^^^^^^^ creates a filter that looks like:# tc filter ls dev eth0 filter parent 1: protocol ip pref 49152 fw filter parent 1: protocol ip pref 49152 fw handle 0xfffffff police 0x1 rate 0bit burst 0b mtu 1b action reclassify ^^^^^^^^^^^^^^^^^ ref -543190236 bind 4
Quoted 5 lines
(which reclassifies and thus lets 0xfffffff-marked packets through).
I'm pretty sure this used to work under 2.4.x (though I no longer have a 2.4 box to test with), but it hasn't worked on any of the 2.6.x kernels I've tried (with both iproute2-ss060323 and 070710).
Good catch. It seems this is merely a parsing error, iproute doesn't have an "action" parameter and aborts parsing, so it uses the default value of "RECLASSIFY". It never had this parameter, so this patch removes it from the help text and makes it return an error.
BTW, Stephen, whats the status of all the patches I sent you?
tc/m_police.c +3 -2
@@ -37,7 +37,7 @@ static void usage(void)fprintf (stderr,"Usage: ... police rate BPS burst BYTES[/BYTES] [ mtu BYTES[/BYTES] ]\n" );fprintf (stderr," [ peakrate BPS ] [ avrate BPS ]\n" );fprintf (stderr," [ ACTIONTERM ]\n" ); -fprintf (stderr,"Old Syntax ACTIONTERM := action <EXCEEDACT>[/NOTEXCEEDACT] \n" ); +fprintf (stderr,"Old Syntax ACTIONTERM := <EXCEEDACT>[/NOTEXCEEDACT] \n" );fprintf (stderr,"New Syntax ACTIONTERM := conform-exceed <EXCEEDACT>[/NOTEXCEEDACT] \n" );fprintf (stderr,"Where: *EXCEEDACT := pipe | ok | reclassify | drop | continue \n" );fprintf (stderr,"Where: pipe is only valid for new syntax \n" );
@@ -236,7 +236,8 @@ int act_parse_police(struct action_util *a,int *argc_p, char ***argv_p, int tca_ }else if (strcmp (*argv,"help" ) ==0 ) {usage (); }else { -break ; +fprintf (stderr,"What is \"%s\"?\n" , *argv); +return -1 ; } ok++; argc--; argv++;
Quoted 7 lines · At 2007-07-18 11:49:55 +0200, [email protected] wrote:
Quoted 3 lines
# tc filter add dev eth0 parent 1: protocol ip prio 0 handle 0xfffffff fw police rate 1 burst 1 mpu 0 mtu 1 action dropIt seems this is merely a parsing error, iproute doesn't have an "action" parameter and aborts parsing, so it uses the default value of "RECLASSIFY".
I can confirm that your patch deals with my command sensibly, and also that "tc filter add ... conform-exceed drop/drop" does what I wanted.
Quoted 1 line
It never had this parameter [...]
That command is from a script that used to work with iproute2-ss020116 (2002!), which had the following in tc/m_police.c:
210 } else if (strcmp(*argv, "action") == 0) {
211 NEXT_ARG();
212 if (get_police_result(&p.action, &presult, *argv)) {
I don't know when that bit was dropped, but it used to be there. :-)
Thank you for your help.
-- ams
Quoted 17 lines · Abhijit Menon-Sen
Quoted 6 lines · At 2007-07-18 11:49:55 +0200, [email protected] wrote:
Quoted 2 lines
# tc filter add dev eth0 parent 1: protocol ip prio 0 handle 0xfffffff fw police rate 1 burst 1 mpu 0 mtu 1 action dropIt seems this is merely a parsing error, iproute doesn't have an "action" parameter and aborts parsing, so it uses the default value of "RECLASSIFY".
I can confirm that your patch deals with my command sensibly, and also that "tc filter add ... conform-exceed drop/drop" does what I wanted.
Quoted 1 line
It never had this parameter [...]
Quoted 8 lines
That command is from a script that used to work with iproute2-ss020116 (2002!), which had the following in
tc/m_police.c:210 } else if (
strcmp(*argv, "action")== 0) {
211NEXT_ARG();
212 if (get_police_result(&p.action, &presult, *argv)) {I don't know when that bit was dropped, but it used to be there. :-)
Indeed, I missed that. I'll fix up the patch ..
Quoted 9 lines · Patrick McHardy
Quoted 7 lines · Abhijit Menon-Sen
That command is from a script that used to work with iproute2-ss020116 (2002!), which had the following in
tc/m_police.c:210 } else if (
strcmp(*argv, "action")== 0) {
211NEXT_ARG();
212 if (get_police_result(&p.action, &presult, *argv)) {
Quoted 5 lines
Quoted 1 line
I don't know when that bit was dropped, but it used to be there. :-)
Indeed, I missed that. I'll fix up the patch ..
OK this patch fixes parsing of "action ...". I've removed the erroring on unknown arguments again since in that case the caller should continue parsing.
tc/m_police.c +2 -1
@@ -227,7 +227,8 @@ int act_parse_police(struct action_util *a,int *argc_p, char ***argv_p, int tca_ p.action =TC_POLICE_OK ; }else if (matches (*argv,"pipe" ) ==0 ) { p.action =TC_POLICE_PIPE ; - }else if (strcmp (*argv,"conform-exceed" ) ==0 ) { + }else if (strcmp (*argv,"action" ) ==0 || +strcmp (*argv,"conform-exceed" ) ==0 ) {NEXT_ARG ();if (get_police_result (&p.action, &presult, *argv)) {fprintf (stderr,"Illegal \"action\"\n" );