Skip to contentSkip to conversation

Please pull 'upstream' branch of rt2x00

DISCUSSION Ivo van Doorn 1 participant 2 messages Jul 20, 2007

lore
Share & tools
lore
#0 lore raw

Hi John,

Finally the 2.0.3 release of rt2x00 is here :)

And as promised since actually contains bugfixes The hightlights are a working link tuner which finally makes sure all drivers come close to being actually useable.

Also a small change in statistics, rt2x00 will now only report the RSSI to mac80211. The reporting of Noise values have been removed,
since rt2x00 cannot measure the noise and previously
reported the sensitivity value determined by the link_tuner.
And I am not completely sure if that is a desired behavior, since the preference would be a measured value I guess.

Also I still have to determine what a good value for the Signal reporting should be. With only a RSSI reporting I feel rt2x00 isn't reporting all that it can...

Ivo

---

The following changes since commit a7008e4ecc4ec69a9868105ce7f805a6ab486d69:
Johannes Berg (1):

        mac80211: regdomain.c needs to include ieee80211_i.h

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ master

Adam Baker (1):
rt2x00: Set Maximum sensitivity when not receiving

Ivo van Doorn (42):
rt2x00: Remove usage of open and stop callbacks
rt2x00: Fix rfkill compilation
rt2x00: rfkill should use input_poll device
rt2x00: Fix promisc mode check
rt2x00: Put debugfs_intf inbetween DEBUGFS defines
rt2x00: Cleanup debug messages
rt2x00: Remove ENTRY_TXD_NEW_SEQ flag
rt2x00: Remove DRV_NAME define from rt2x00.h
rt2x00: Remove device & mac_addr fields
rt2x00: Use the mac80211 provided workqueue
rt2x00: Don't wake device on resume
rt2x00: Move interrupt toggling into seperate function
rt2x00: Round LINK_TUNER_INTERVAL up
rt2x00: Set the IEEE80211_HW_NO_PROBE_FILTERING flag
rt2x00: Add rt2570 chipset revisions
rt2x00: Split TXD_ENTRY_AVAILABLE
rt2x00: rt61 should check the CIPHER_ERROR bit
rt2x00: Fix reporting false rate during rx
rt2x00: Correctly exit the firmware load function
rt2x00: Fix link tuner limitation for rt2400pci
rt2x00: Cleanup Kconfig dependencies and selects
rt2x00: Defer firmware loading untill ifup
rt2x00: Change register definition ordering
rt2x00: Correctly initialize PSCSR2 in rt2400.
rt2x00: Introduce the walking average
rt2x00: Remove noise reporting
rt2x00: Fix RSSI value reading / reporting / link tuning
rt2x00: Use prefetch for ring loop
rt2x00: Use the register field defines
rt2x00: Move initialization of rings into rt2x00usb
rt2x00: Move usb_interrupt_rxdone into rt2x00usb
rt2x00: Fix RX skb allocation
rt2x00: KConfig layout correction
rt2x00: Set DEVICE_ENABLED_RADIO_HW when rfkill is disabled
rt2x00: Change word argument for debug_access_t
rt2x00: Suspend/Resume Don't register/reregister device Merge branch 'wireless-dev'
rt2x00: Fix CTS frame requirement detection
rt2x00: Don't cut FCS in RX frames
rt2x00: Use delayed_work_pending
rt2x00: Don't enable/disable link tuner twice
rt2x00: Release 2.0.3

 drivers/net/wireless/mac80211/rt2x00/Kconfig       |   91 ++++----
 drivers/net/wireless/mac80211/rt2x00/rt2400pci.c   |  167 ++++++-------
 drivers/net/wireless/mac80211/rt2x00/rt2400pci.h   |   45 ++--
 drivers/net/wireless/mac80211/rt2x00/rt2500pci.c   |  191 +++++++-------
 drivers/net/wireless/mac80211/rt2x00/rt2500pci.h   |   54 +++--
 drivers/net/wireless/mac80211/rt2x00/rt2500usb.c   |  176 ++++---------
 drivers/net/wireless/mac80211/rt2x00/rt2500usb.h   |   61 +++--
 drivers/net/wireless/mac80211/rt2x00/rt2x00.h      |  141 +++++++----
 drivers/net/wireless/mac80211/rt2x00/rt2x00debug.h |    2 +-
 drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c   |   86 +------
 .../net/wireless/mac80211/rt2x00/rt2x00firmware.c  |   77 ++----
 .../net/wireless/mac80211/rt2x00/rt2x00firmware.h  |    6 -
 drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h   |    7 -
 drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c   |  131 ++++------
 drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c   |   52 ++++-
 drivers/net/wireless/mac80211/rt2x00/rt2x00pci.h   |   16 +-
 .../net/wireless/mac80211/rt2x00/rt2x00rfkill.c    |   62 +++--
 .../net/wireless/mac80211/rt2x00/rt2x00rfkill.h    |    7 +
 drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c   |  156 +++++++++---
 drivers/net/wireless/mac80211/rt2x00/rt61pci.c     |  264 +++++++++++++-------
 drivers/net/wireless/mac80211/rt2x00/rt61pci.h     |   77 ++++--
 drivers/net/wireless/mac80211/rt2x00/rt73usb.c     |  242 ++++++++++---------
 drivers/net/wireless/mac80211/rt2x00/rt73usb.h     |   81 ++++---
 23 files changed, 1166 insertions(+), 1026 deletions(-)
#1 lore raw

Hi,

One additional note I forgot to mention:

Quoted 7 lines

The following changes since commit a7008e4ecc4ec69a9868105ce7f805a6ab486d69:
Johannes Berg (1):

        mac80211: regdomain.c needs to include ieee80211_i.h

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ master

Please note the new location of the Git repository ;) Because of problems with the git.serialmonkey repository we have now moved to git.kernel.org. :)

Ivo