Skip to contentSkip to conversation

Please pull 'upstream' branch of rt2x00

DISCUSSION Ivo van Doorn 2 participants 3 messages Jul 25, 2007 – Jul 26, 2007

lore
Share & tools
lore
#0 lore raw

Hi John,

Today a very quick release of 2.0.4,
reason for this quick followup on 2.0.3 are the fixes regarding the USB ID and the rt61pci interrupts.

The latter one (hopefully) resolves an bugreport recently raised in the Fedora Bugzilla. (I'll update the report in a few seconds)

And yes I have read the mails of today regarding patch submissions,
so I'll start sending the individual patches as well along with this pull request. ;)

Short note about the state of rt2x00:
- Code cleaning is progressing, next version will probably contain the result of Lindent run. But after that I don't expect big changes regarding code style.

- Writing "Magical" values to the registers has been reduced as much as possible, most values that are still magical are really magic and I have no clue on what they exactly mean, except that those values should be written. ;)

- Suspend/resume is completely broken. I am not sure how the device should correctly suspend/resume. Most important points on this area are deregistering/registering ieee80211_hw and reassociation after resume.
I am gathering some more info on this, and will post a bigger report on the mailinglist in a few days.

- Statistics reading. Noise and Signal are still empty...
It would really be nice to have some value to report for these statistics.

- Bug reports show definite progress, rt2x00 doesn't really seem to break things, but neither is it doing a usefull things...

Ivo

---

The following changes since commit 9cc4f5142dd983d178b158e782d5e60900e48270:
Michael Wu (1):
mac80211: use more GFP_KERNEL instead of GFP_ATOMIC

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git/ upstream

Adam Baker (1):
rt2x00: Don't export unneeded symbols

Ivo van Doorn (13):
rt2x00: Check permissions on debugfs write
Merge branch 'wireless-dev'
rt2x00: Use rts_cts_rate for CTS frames
rt2x00: Cleanup allocation/initialization
rt2x00: rt61pci interrupts are called on MCU CMD done
rt2x00: Reduce requirement for debugfs wrapper functions
rt2x00: Don't toggle promisc mode in link_tuner
rt2x00: Fix MAC address initialization for multiple interfaces Merge branch 'wireless-dev'
rt2x00: Check for all errors on RXdone
rt2x00: Parse chipset revision for RT chip validation
rt2x00: Release 2.0.4
Merge branch 'wireless-dev'

 drivers/net/wireless/mac80211/rt2x00/rt2400pci.c   |   83 +--
 drivers/net/wireless/mac80211/rt2x00/rt2400pci.h   |    2 +-
 drivers/net/wireless/mac80211/rt2x00/rt2500pci.c   |   90 +---
 drivers/net/wireless/mac80211/rt2x00/rt2500pci.h   |    2 +-
 drivers/net/wireless/mac80211/rt2x00/rt2500usb.c   |  105 ++---
 drivers/net/wireless/mac80211/rt2x00/rt2500usb.h   |    4 +-
 drivers/net/wireless/mac80211/rt2x00/rt2x00.h      |   17 +-
 drivers/net/wireless/mac80211/rt2x00/rt2x00debug.c |  237 +++------
 drivers/net/wireless/mac80211/rt2x00/rt2x00debug.h |   27 +-
 drivers/net/wireless/mac80211/rt2x00/rt2x00dev.c   |  560 ++++++++++----------
 drivers/net/wireless/mac80211/rt2x00/rt2x00dev.h   |    1 -
 drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c   |   57 ++-
 drivers/net/wireless/mac80211/rt2x00/rt2x00pci.c   |   58 ++-
 drivers/net/wireless/mac80211/rt2x00/rt2x00usb.c   |  126 +++--
 drivers/net/wireless/mac80211/rt2x00/rt2x00usb.h   |    1 -
 drivers/net/wireless/mac80211/rt2x00/rt61pci.c     |   99 ++---
 drivers/net/wireless/mac80211/rt2x00/rt61pci.h     |    2 +-
 drivers/net/wireless/mac80211/rt2x00/rt73usb.c     |  100 ++---
 drivers/net/wireless/mac80211/rt2x00/rt73usb.h     |    2 +-
 19 files changed, 731 insertions(+), 842 deletions(-)
#1 lore raw
Quoted 3 lines · Ivo van Doorn

Today a very quick release of 2.0.4,
reason for this quick followup on 2.0.3 are the fixes regarding the USB ID and the rt61pci interrupts.

Ivo,

Thanks for the post -- I merged them into wireless-dev. You might also notice that I moved the driver files up two levels into drivers/net/wireless (along w/ the other drivers).

Any idea when you'll be ready for rt2x00 to go upstream?

John

Signature · 2 lines
John W. Linville
[email protected]
#2 lore raw

Hi,

Quoted 9 lines
Quoted 3 lines

Today a very quick release of 2.0.4,
reason for this quick followup on 2.0.3 are the fixes regarding the USB ID and the rt61pci interrupts.

Ivo,

Thanks for the post -- I merged them into wireless-dev. You might also notice that I moved the driver files up two levels into drivers/net/wireless (along w/ the other drivers).

Thanks.
But one request, do you mind if I put all rt2x00 files into a new folder drivers/net/wireless/rt2x00 ?
There are 25 files that belong to rt2x00 and it would be nice if I can have them grouped together.

Quoted 1 line

Any idea when you'll be ready for rt2x00 to go upstream?

Not really sure I want to have at least atop making the suspend/resume result into a big kernel panic, and adhoc mode should come back to live.
All other reported bugs are more rare and appear not affect that many people.
So hopefully within 1 or 2 months should rt2x00 reach a condition where I am more confident about moving a bit further upstream.

Ivo