FRV: Enable the MB86943 PCI arbiter correctly
PATCH 1/1 FRV: Enable the MB86943 PCI arbiter correctly
From: David Howells <[email protected]>
Enable the MB93090 motherboard's MB86943 PCI arbiter correctly by assigning to the register rather than comparing against it. This is required to support bus mastering.
Signed-off-by David Howells <[email protected]>
---
arch/frv/mb93090-mb00/pci-vdk.c | 3 ++- include/asm-frv/mb86943a.h | 3 +++ 2 files changed, 5 insertions(+), 1 deletions(-)
arch/frv/mb93090-mb00/pci-vdk.c +2 -1
@@ -400,7 +400,8 @@ int __init pcibios_init(void) __reg_MB86943_pci_sl_mem_base = __region_CS2 +0x08000000 ;mb (); - *(volatile unsigned long *)(__region_CS2+0x01300014 ) ==1 ; +/* enable PCI arbitration */ + __reg_MB86943_pci_arbiter =MB86943_PCIARB_EN ; ioport_resource.start = (__reg_MB86943_sl_pci_io_base <<9 ) &0xfffffc00 ; ioport_resource.end = (__reg_MB86943_sl_pci_io_range <<9 ) |0x3ff ;
include/asm-frv/mb86943a.h +3 -0
@@ -36,4 +36,7 @@#define __reg_MB86943_pci_sl_io_base *(volatile uint32_t *) (__region_CS1 + 0x70)#define __reg_MB86943_pci_sl_mem_base *(volatile uint32_t *) (__region_CS1 + 0x78) +#define __reg_MB86943_pci_arbiter *(volatile uint32_t *) (__region_CS2 + 0x01300014) +#define MB86943_PCIARB_EN 0x00000001 +#endif /* _ASM_MB86943A_H */