remove useless/wrong P20_24XX_TSC_IRQ mux
Subsystems (3)
PATCH 1/1 remove useless/wrong P20_24XX_TSC_IRQ mux
Remove bogus TSC_IRQ pinmux; it's not used, there's no pin dedicated for touchscreen (or other TSC chip) purposes, and this doesn't even look right for P20 (0x10b not 0x108, plus an IRQ would need to be a GPIO i.e. mux 3 not mux 0).
Signed-off-by David Brownell <[email protected]>
arch/arm/mach-omap2/mux.c +0 -3
@@ -106,9 +106,6 @@ MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1)MUX_CFG_24XX ("E3_242X_DMAREQ5" ,0x071 ,2 ,0 ,0 ,1 ) -/* TSC IRQ */ -MUX_CFG_24XX ("P20_24XX_TSC_IRQ" ,0x108 ,0 ,0 ,0 ,1 ) - /* UART3 */ MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1)MUX_CFG_24XX ("K14_24XX_UART3_RX" ,0x119 ,0 ,0 ,0 ,1 )
include/asm-arm/arch-omap/mux.h +0 -2
@@ -498,8 +498,6 @@ enum omap24xx_index {D3_242X_DMAREQ4 ,E3_242X_DMAREQ5 , -P20_24XX_TSC_IRQ , -/* UART3 */ K15_24XX_UART3_TX , K14_24XX_UART3_RX,
Tony Lindgren
maintainerQuoted 22 lines · David Brownell
Remove bogus
TSC_IRQpinmux; it's not used, there's no pin dedicated for touchscreen (or other TSC chip) purposes, and this doesn't even look right for P20 (0x10bnot0x108, plus an IRQ would need to be a GPIO i.e. mux 3 not mux 0).Signed-off-by David Brownell <[email protected]>arch/arm/mach-omap2/mux.c +0
-3@@ -106,9 +106,6 @@ MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1)MUX_CFG_24XX ("E3_242X_DMAREQ5" ,0x071 ,2 ,0 ,0 ,1 ) -/* TSC IRQ */ -MUX_CFG_24XX ("P20_24XX_TSC_IRQ" ,0x108 ,0 ,0 ,0 ,1 ) - /* UART3 */ MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1)MUX_CFG_24XX ("K14_24XX_UART3_RX" ,0x119 ,0 ,0 ,0 ,1 )
include/asm-arm/arch-omap/mux.h enum omap24xx_index { · line 503
Quoted 8 lines
include/asm-arm/arch-omap/mux.h +0
-2@@ -498,8 +498,6 @@ enum omap24xx_index {D3_242X_DMAREQ4 ,E3_242X_DMAREQ5 , -P20_24XX_TSC_IRQ , -/* UART3 */ K15_24XX_UART3_TX , K14_24XX_UART3_RX,
Pushing today.
Tony