mpt fusion: Creation of mptsas.h header file

index ffbf0e5..5951fe0 100644
@@ -61,6 +61,7 @@
 
 #include "mptbase.h"
 #include "mptscsih.h"
+#include "mptsas.h"
 
 
 #define my_NAME		"Fusion MPT SAS Host driver"

@@ -96,111 +97,6 @@ static u8	mptsasMgmtCtx = MPT_MAX_PROTOCOL_DRIVERS;
 
 static void mptsas_hotplug_work(struct work_struct *work);
 
-struct mptsas_target_reset_event {
-	struct list_head 	list;
-	EVENT_DATA_SAS_DEVICE_STATUS_CHANGE sas_event_data;
-	u8	target_reset_issued;
-};
-
-enum mptsas_hotplug_action {
-	MPTSAS_ADD_DEVICE,
-	MPTSAS_DEL_DEVICE,
-	MPTSAS_ADD_RAID,
-	MPTSAS_DEL_RAID,
-	MPTSAS_ADD_INACTIVE_VOLUME,
-	MPTSAS_IGNORE_EVENT,
-};
-
-struct mptsas_hotplug_event {
-	struct work_struct	work;
-	MPT_ADAPTER		*ioc;
-	enum mptsas_hotplug_action event_type;
-	u64			sas_address;
-	u8			channel;
-	u8			id;
-	u32			device_info;
-	u16			handle;
-	u16			parent_handle;
-	u8			phy_id;
-	u8			phys_disk_num_valid;	/* hrc (hidden raid component) */
-	u8			phys_disk_num;		/* hrc - unique index*/
-	u8			hidden_raid_component;	/* hrc - don't expose*/
-};
-
-struct mptsas_discovery_event {
-	struct work_struct	work;
-	MPT_ADAPTER		*ioc;
-};
-
-/*
- * SAS topology structures
- *
- * The MPT Fusion firmware interface spreads information about the
- * SAS topology over many manufacture pages, thus we need some data
- * structure to collect it and process it for the SAS transport class.
- */
-
-struct mptsas_devinfo {
-	u16	handle;		/* unique id to address this device */
-	u16	handle_parent;	/* unique id to address parent device */
-	u16	handle_enclosure; /* enclosure identifier of the enclosure */
-	u16	slot;		/* physical slot in enclosure */
-	u8	phy_id;		/* phy number of parent device */
-	u8	port_id;	/* sas physical port this device
-				   is assoc'd with */
-	u8	id;		/* logical target id of this device */
-	u32	phys_disk_num;	/* phys disk id, for csmi-ioctls */
-	u8	channel;	/* logical bus number of this device */
-	u64	sas_address;    /* WWN of this device,
-				   SATA is assigned by HBA,expander */
-	u32	device_info;	/* bitfield detailed info about this device */
-};
-
-/*
- * Specific details on ports, wide/narrow
- */
-struct mptsas_portinfo_details{
-	u16	num_phys;	/* number of phys belong to this port */
-	u64	phy_bitmask; 	/* TODO, extend support for 255 phys */
-	struct sas_rphy *rphy;	/* transport layer rphy object */
-	struct sas_port *port;	/* transport layer port object */
-	struct scsi_target *starget;
-	struct mptsas_portinfo *port_info;
-};
-
-struct mptsas_phyinfo {
-	u16	handle;			/* unique id to address this */
-	u8	phy_id; 		/* phy index */
-	u8	port_id; 		/* firmware port identifier */
-	u8	negotiated_link_rate;	/* nego'd link rate for this phy */
-	u8	hw_link_rate; 		/* hardware max/min phys link rate */
-	u8	programmed_link_rate;	/* programmed max/min phy link rate */
-	u8	sas_port_add_phy;	/* flag to request sas_port_add_phy*/
-	struct mptsas_devinfo identify;	/* point to phy device info */
-	struct mptsas_devinfo attached;	/* point to attached device info */
-	struct sas_phy *phy;		/* transport layer phy object */
-	struct mptsas_portinfo *portinfo;
-	struct mptsas_portinfo_details * port_details;
-};
-
-struct mptsas_portinfo {
-	struct list_head list;
-	u16		num_phys;	/* number of phys */
-	struct mptsas_phyinfo *phy_info;
-};
-
-struct mptsas_enclosure {
-	u64	enclosure_logical_id;	/* The WWN for the enclosure */
-	u16	enclosure_handle;	/* unique id to address this */
-	u16	flags;			/* details enclosure management */
-	u16	num_slot;		/* num slots */
-	u16	start_slot;		/* first slot */
-	u8	start_id;		/* starting logical target id */
-	u8	start_channel;		/* starting logical channel id */
-	u8	sep_id;			/* SEP device logical target id */
-	u8	sep_channel;		/* SEP channel logical channel id */
-};
-
 static void mptsas_print_phy_data(MPT_ADAPTER *ioc,
 					MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
 {

158 lines not on this page · raw message