Skip to contentSkip to conversation

i2c-i801: SMBus patch for Intel Tolapai

PATCH In review Jason Gaston 2 participants 4 messages Aug 31, 2007 – Sep 29, 2007

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 i2c-i801: SMBus patch for Intel Tolapai

Resend with uppercase define.

This updated patch adds the Intel Tolapai SMBus Controller DID's. This patch relies on the Tolapai patch to pci_ids.h

drivers/i2c/busses/i2c-i801.c renamed from drivers/i2c/busses/i2c-i801.c.orig +3 -0
@@ -34,6 +34,7 @@
     ESB2		269B
     ICH8		283E
     ICH9		2930
+    Tolapai		5032
     This driver supports several versions of Intel's I/O Controller Hubs (ICH).
     For SMBus support, they are similar to the PIIX4 and are part
     of Intel's '810' and other chipsets.
@@ -543,6 +544,7 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
 	{ 0, }
 };
 
@@ -563,6 +565,7 @@
 	case PCI_DEVICE_ID_INTEL_ESB2_17:
 	case PCI_DEVICE_ID_INTEL_ICH8_5:
 	case PCI_DEVICE_ID_INTEL_ICH9_6:
+	case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
 		isich4 = 1;
 		break;
 	default:
#1 lore raw

Hi Jason,

Quoted 26 lines · Jason Gaston

Resend with uppercase define.

This updated patch adds the Intel Tolapai SMBus Controller DID's. This patch relies on the Tolapai patch to pci_ids.h

drivers/i2c/busses/i2c-i801.c renamed from drivers/i2c/busses/i2c-i801.c.orig +2 -0
@@ -34,6 +34,7 @@
     ESB2		269B
     ICH8		283E
     ICH9		2930
+    Tolapai		5032
     This driver supports several versions of Intel's I/O Controller Hubs (ICH).
     For SMBus support, they are similar to the PIIX4 and are part
     of Intel's '810' and other chipsets.
@@ -543,6 +544,7 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
 	{ 0, }
 };
 

drivers/i2c/busses/i2c-i801.c line 571

Quoted 7 lines
drivers/i2c/busses/i2c-i801.c renamed from drivers/i2c/busses/i2c-i801.c.orig +1 -0
@@ -563,6 +565,7 @@
 	case PCI_DEVICE_ID_INTEL_ESB2_17:
 	case PCI_DEVICE_ID_INTEL_ICH8_5:
 	case PCI_DEVICE_ID_INTEL_ICH9_6:
+	case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
 		isich4 = 1;
 		break;
 	default:

Applied together with the Documentation patch (no need for a separate patch). Note that I will have to wait for Greg to pick the pci_ids.h patch before I can push this one.

Signature · 1 line
Jean Delvare
#2 lore raw
Quoted 6 lines

-----Original Message-----
From: Jean Delvare [mailto:[email protected]]
Sent: Friday, August 31, 2007 8:51 AM
To: Gaston, Jason D
Cc: [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH 2.6.23-rc4][reRESEND] i2c-i801: SMBus patch for

Intel

Quoted 13 lines

Tolapai

Hi Jason,

Quoted 8 lines · Jason Gaston

Resend with uppercase define.

This updated patch adds the Intel Tolapai SMBus Controller DID's. This patch relies on the Tolapai patch to pci_ids.h

--- linux-2.6.23-rc4/drivers/i2c/busses/i2c-i801.c.orig

2007-08-27

Quoted 9 lines

18:32:35.000000000 -0700

Quoted 1 line

+++ linux-2.6.23-rc4/drivers/i2c/busses/i2c-i801.c 2007-08-30

20:25:10.000000000 -0700

drivers/i2c/busses/i2c-i801.c line 38

Quoted 6 lines
drivers/i2c/busses/i2c-i801.c renamed from drivers/i2c/busses/i2c-i801.c.orig +1 -0
@@ -34,6 +34,7 @@
     ESB2		269B
     ICH8		283E
     ICH9		2930
+    Tolapai		5032
     This driver supports several versions of Intel's I/O Controller

Hubs

Quoted 5 lines

(ICH).

drivers/i2c/busses/i2c-i801.c line 544

Quoted 4 lines
drivers/i2c/busses/i2c-i801.c renamed from drivers/i2c/busses/i2c-i801.c.orig +0 -0
     For SMBus support, they are similar to the PIIX4 and are part
     of Intel's '810' and other chipsets.
@@ -543,6 +544,7 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17)

},

Quoted 3 lines

drivers/i2c/busses/i2c-i801.c

Quoted 3 lines
drivers/i2c/busses/i2c-i801.c renamed from drivers/i2c/busses/i2c-i801.c.orig +1 -0
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1)

},

Quoted 16 lines

drivers/i2c/busses/i2c-i801.c line 571

Quoted 11 lines
drivers/i2c/busses/i2c-i801.c renamed from drivers/i2c/busses/i2c-i801.c.orig +1 -0
 	{ 0, }
 };
 
@@ -563,6 +565,7 @@
 	case PCI_DEVICE_ID_INTEL_ESB2_17:
 	case PCI_DEVICE_ID_INTEL_ICH8_5:
 	case PCI_DEVICE_ID_INTEL_ICH9_6:
+	case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
 		isich4 = 1;
 		break;
 	default:

Applied together with the Documentation patch (no need for a separate patch). Note that I will have to wait for Greg to pick the pci_ids.h patch before I can push this one.

Quoted 2 lines

--
Jean Delvare

Jean,

The pci_ids.h file is updated in 2.6.23-rc8. Can you push this i2c-i801.c patch?

Thanks,

Jason

#3 lore raw

Hi Jason,

Quoted 2 lines · Jason D

The pci_ids.h file is updated in 2.6.23-rc8. Can you push this i2c-i801.c patch?

This patch has been in -mm since 2.6.23-rc7-mm1. It will go into Linus' tree shortly after 2.6.23 is released. This is not a bug fix, so I can't push it into 2.6.23.

Signature · 1 line
Jean Delvare