(unknown)
hi,
i am trying to set up routing of all outgoing http-requests on my workstation through my openvpn gateway (tun0). the web told me to do it:
iptables -t mangle -A OUTPUT -p tcp --dport 80 -j MARK --set-mark 4 ip rule add fwmark 4 lookup 3
ip route add default dev tun0 table 3
the problem is that it does not work. tcpdump gives me:
00:28:00.461045 IP (tos 0x0, ttl 64, id 28447, offset 0, flags [DF],
proto: UDP (17), length: 71) 192.168.0.125.1049 > vroot.domain: [udp sum ok] 62654+ PTR? 67.11.71.195.in-addr.arpa. (43) 00:28:00.515190 IP (tos 0x0, ttl 56, id 0, offset 0, flags [DF], proto:
UDP (17), length: 127) vroot.domain > 192.168.0.125.1049: 62654 NXDomain
q: PTR? 67.11.71.195.in-addr.arpa. 0/1/0 ns: 71.195.in-addr.arpa. (99) 00:28:01.459744 arp who-has 195.71.11.67 tell 192.168.0.125 00:28:02.459844 arp who-has 195.71.11.67 tell 192.168.0.125
the arp-requests dont seem to be right, any suggestions?
Mario
Signature · 2 lines
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kanns mit allen: http://www.gmx.net/de/go/multimessenger
Re: Port-based routing with OpenVPN
Hello,
Quoted 6 lines · Mario Hülsegge
i am trying to set up routing of all outgoing http-requests on my workstation through my openvpn gateway (tun0). the web told me to do it:
iptables -t mangle -A OUTPUT -p tcp --dport 80 -j MARK --set-mark 4 ip rule add fwmark 4 lookup 3
ip route add default dev tun0 table 3
Looks fine.
Quoted 6 lines
the problem is that it does not work. tcpdump gives me:
00:28:00.461045 IP (tos
0x0, ttl 64, id 28447, offset 0, flags [DF], proto: UDP (17), length: 71) 192.168.0.125.1049 > vroot.domain: [udp sum ok] 62654+ PTR? 67.11.71.195.in-addr.arpa. (43) 00:28:00.515190 IP (tos0x0, ttl 56, id 0, offset 0, flags [DF], proto: UDP (17), length: 127) vroot.domain > 192.168.0.125.1049: 62654 NXDomain q: PTR? 67.11.71.195.in-addr.arpa. 0/1/0 ns: 71.195.in-addr.arpa. (99) 00:28:01.459744 arp who-has 195.71.11.67 tell 192.168.0.125
00:28:02.459844 arp who-has 195.71.11.67 tell 192.168.0.125
Was this trace captured on interface tun0 ?
Please use option -n so addresses and port numbers are not converted into confusing names.
What is the address of vroot ? Is it the other end of the VPN ?
Is the OpenVPN link configured in TUN (IP) or TAP (ethernet) mode ? The interface name tun0 suggests TUN mode, but the ARP requests suggest TAP mode. If it is TAP mode, you must specify the gateway address in the ip route statement just as you would do with a gateway on an ethernet link.
Re: Port-based routing with OpenVPN
Hi,
and thank you for answering despite the fact i forgot to set a subject :)
Quoted 1 line
Was this trace captured on interface tun0 ?
yes
Quoted 1 line
What is the address of vroot ? Is it the other end of the VPN ?
no, it is just my dns-server that has nothing to do with the vpn.
Quoted 1 line
Is the OpenVPN link configured in TUN (IP) or TAP (ethernet) mode ?
it is in tun mode, i have no idea why it acts like in tap mode.
Mario
Re: Port-based routing with OpenVPN
In reply to Pascal HambourgAm Sonntag, den 16.09.2007, 13:05 +0200 schrieb Pascal Hambourg:
Quoted 12 lines
Quoted 11 lines
the problem is that it does not work. tcpdump gives me:
00:28:00.461045 IP (tos
0x0, ttl 64, id 28447, offset 0, flags [DF],
proto: UDP (17), length: 71) 192.168.0.125.1049 > vroot.domain: [udp sum ok] 62654+ PTR? 67.11.71.195.in-addr.arpa. (43) 00:28:00.515190 IP (tos0x0, ttl 56, id 0, offset 0, flags [DF], proto:
UDP (17), length: 127) vroot.domain > 192.168.0.125.1049: 62654 NXDomain
q: PTR? 67.11.71.195.in-addr.arpa. 0/1/0 ns: 71.195.in-addr.arpa. (99) 00:28:01.459744 arp who-has 195.71.11.67 tell 192.168.0.125 00:28:02.459844 arp who-has 195.71.11.67 tell 192.168.0.125
Quoted 1 line
Was this trace captured on interface tun0 ?
i am sorry, i confused the tcpdump output with another test on a normal
eth device, this is the capture on tun0:
23:47:54.378123 IP 192.168.0.125.3794 > ha-42.web.de.www: S 471744113:471744113(
0) win 5840 <mss 1460,sackOK,timestamp 7974928 0,nop,wscale 3> 23:47:57.377790 IP 192.168.0.125.3794 > ha-42.web.de.www: S 471744113:471744113(
0) win 5840 <mss 1460,sackOK,timestamp 7975678 0,nop,wscale 3> 23:48:03.378327 IP 192.168.0.125.3794 > ha-42.web.de.www: S 471744113:471744113(
0) win 5840 <mss 1460,sackOK,timestamp 7977178 0,nop,wscale 3> 23:48:15.379418 IP 192.168.0.125.3794 > ha-42.web.de.www: S 471744113:471744113(
0) win 5840 <mss 1460,sackOK,timestamp 7980178 0,nop,wscale 3>
the answer seems to be blocked in some way.. suggestions?
Re: Port-based routing with OpenVPN
Quoted 5 lines · Mario Hülsegge
i am sorry, i confused the tcpdump output with another test on a normal
eth device, this is the capture on tun0:23:47:54.378123 IP 192.168.0.125.3794 > ha-42.web.de.www: S 471744113:471744113(0) win 5840 <mss 1460,sackOK,timestamp 7974928 0,nop,wscale 3>
[etc.]
Quoted 1 line
the answer seems to be blocked in some way.. suggestions?
First, can you check on the VPN gateway that the request is received and forwarded to the destination server ?
Then, check the return path routing. One step would be to set the default route through the VPN and check that everything works well.
I see that your workstation source address, 192.168.0.125, is the same as in the capture on the ethernet device, and probably different from the tun0 address. This is normal, because the source address selection occurs before the port based routing is taken into account. However if the VPN gateway has no route to your source address, replies cannot come back. You may need to add an iptables SNAT or MASQUERADE rule for packets leaving the tun0 interface. Beware that with older kernels MASQUERADE may not work well with advanced routing.
Also, if the source address is a private address, the VPN gateway must perform SNAT or MASQUERADE on packets forwarded from the VPN to the public network.
Finally, check that /proc/sys/net/ipv4/conf/tun0/rp_filter = 0, else your workstation routing may drop the replies arriving at tun0 (although tcpdump would see them).
Re: Port-based routing with OpenVPN
Am Mittwoch, den 26.09.2007, 12:33 +0200 schrieb Pascal Hambourg:
Quoted 7 lines
You may need to add an iptables SNAT or MASQUERADE rule for packets leaving the tun0 interface. [...]
Finally, check that
/proc/sys/net/ipv4/conf/tun0/rp_filter= 0, else your workstation routing may drop the replies arriving at tun0 (although tcpdump would see them).
-
these 2 hints solved the problem, now all runs fine. i inserted a masq rule before, but without setting rp_filter (who would ever thought of THAT ;) ).
thank you very much for your help.
Re: Port-based routing with OpenVPN
Quoted 3 lines · Mario Hülsegge
these 2 hints solved the problem, now all runs fine. i inserted a masq rule before, but without setting
rp_filter
The kernel disables rp_filter by default, but the startup scripts provided by some distributions enable it.
Quoted 1 line
(who would ever thought of THAT ;) ).
The practical answer is : anyone who experienced the problem once does. Trust me.
The theoretical answer is : anyone using iproute should, because it is a common issue documented in the Linux Advanced Routing & Traffic Control HOWTO, and probably elsewhere. I myself hesitated to mention it and did it only for completeness because it could not be the only cause of your problem : tcpdump would have seen the replies even though the kernel had dropped them.