Skip to contentSkip to conversation

/proc/kallsyms and symbol size

DISCUSSION Stephane Eranian 2 participants 3 messages Sep 24, 2007 – Sep 26, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

Many monitoring tools use /proc/kallsyms to build a symbol table for the kernel. This technique has the advantage that it does not require root privileges, nor an up-to-date /boot/System.map, nor a decompressed kernel in /boot.

The problem is that /proc/kallsyms does not report the size of the symbols. Yet, the information is available in the kernel as it is used by functions such as __print_symbol(). Having the size is useful to correlate the address obtained is a sample with a symbol name. Most tools use an approximation which assumes symbols are contiguous to estimate the size.

Apart from the backward compatbility problem for the output of kallsyms, what would be the major issue with exposing this information?

Thanks.

Signature · 1 line
-Stephane
#1 lore raw
Quoted 1 line · Stephane Eranian

Hello,

Hi, Stephane

Quoted 9 lines

Many monitoring tools use /proc/kallsyms to build a symbol table for the kernel. This technique has the advantage that it does not require root privileges, nor an up-to-date /boot/System.map, nor a decompressed kernel in /boot.

The problem is that /proc/kallsyms does not report the size of the symbols. Yet, the information is available in the kernel as it is used by functions such as __print_symbol(). Having the size is useful to correlate the address obtained is a sample with a symbol name. Most tools use an approximation which assumes symbols are contiguous to estimate the size.

That is actually what the kernel does internally, too. It does not keep the size of the symbol, but tries to guess it from the address of the next non-aliased symbol.

Since the addresses are sorted, this works fine most of the time. This is done to reduce the size used by the symbol table in the running kernel.

Just take a look at "get_symbol_pos" in kernel/kallsyms.c and "get_ksymbol" in kernel/module.c to see exactly how this is done

Signature · 3 lines
Paulo Marques - www.grupopie.com

"There cannot be a crisis today; my schedule is already full."
#2 lore raw

Paulo,

Quoted 23 lines · Paulo Marques
Quoted 1 line · Stephane Eranian

Hello,

Hi, Stephane

Quoted 6 lines

Many monitoring tools use /proc/kallsyms to build a symbol table for the kernel.
This technique has the advantage that it does not require root privileges, nor
an up-to-date /boot/System.map, nor a decompressed kernel in /boot.

Quoted 7 lines

The problem is that /proc/kallsyms does not report the size of the symbols. Yet, the information is available in the kernel as it is used by functions such as __print_symbol(). Having the size is useful to correlate the address obtained
is a sample with a symbol name. Most tools use an approximation which assumes
symbols are contiguous to estimate the size.

That is actually what the kernel does internally, too. It does not keep the size of the symbol, but tries to guess it from the address of the next non-aliased symbol.

Quoted 6 lines

Since the addresses are sorted, this works fine most of the time. This is done to reduce the size used by the symbol table in the running kernel.

Just take a look at "get_symbol_pos" in kernel/kallsyms.c and "get_ksymbol" in kernel/module.c to see exactly how this is done

Ok. Then we cannot really do better.

Also thank you for alerting me on the aliased symbols. I have modified my user code to only keep the first symbol.

Thanks for you help.

Signature · 1 line
-Stephane