2.6.23-rc4-mm1 and -rc6-mm1: boot failure on HP nx6325, related to clockevents
Quoted 11 lines · Mikhail Kshevetskiy
Hello Thomas, Rafael
Quoted 2 lines
We know, that
- disabling local apic timers workAs i can see from the log, you are booting on computer with dualcore AMD processor. Do you have C1E feature enabled?
i386 kernel disable lapic on dualcore AMD with C1E support (see
http://lkml.org/lkml/2007/3/29/199).x86_64kernel do not have this patch still (it's required for tickless kernel only).
Well it is required for non tickless mode as well.
Quoted 3 lines
As result, if
you runx86_64kernel with hrt patch on such computer, the system will stall during boot on lapic timer calibration.
Thanks for the reminder. I have a look into this.
tglx
Rafael,
Quoted 13 lines · Thomas Gleixner
Quoted 11 lines · Mikhail Kshevetskiy
Hello Thomas, Rafael
Quoted 2 lines
We know, that
- disabling local apic timers workAs i can see from the log, you are booting on computer with dualcore AMD processor. Do you have C1E feature enabled?
i386 kernel disable lapic on dualcore AMD with C1E support (see
http://lkml.org/lkml/2007/3/29/199).x86_64kernel do not have this patch still (it's required for tickless kernel only).
Quoted 7 lines
Well it is required for non tickless mode as well.
Quoted 3 lines
As result, if
you runx86_64kernel with hrt patch on such computer, the system will stall during boot on lapic timer calibration.Thanks for the reminder. I have a look into this.
Can you please boot mainline and provide the output of:
# cat /proc/interrupts; sleep 10; cat /proc/interrupts
Thanks,
tglx
Thomas,
Quoted 11 lines · Thomas Gleixner
Rafael,
Quoted 8 lines · Thomas Gleixner
Quoted 7 lines · Mikhail Kshevetskiy
Hello Thomas, Rafael
Quoted 2 lines
We know, that
- disabling local apic timers workAs i can see from the log, you are booting on computer with dualcore AMD processor. Do you have C1E feature enabled?
That's possible, how to check?
Quoted 10 lines
Quoted 10 lines
Quoted 3 lines
i386 kernel disable lapic on dualcore AMD with C1E support (see
http://lkml.org/lkml/2007/3/29/199).x86_64kernel do not have this patch still (it's required for tickless kernel only).Well it is required for non tickless mode as well.
Quoted 3 lines
As result, if
you runx86_64kernel with hrt patch on such computer, the system will stall during boot on lapic timer calibration.
Quoted 5 lines
Quoted 1 line
Thanks for the reminder. I have a look into this.
Can you please boot mainline and provide the output of:
# cat /proc/interrupts; sleep 10; cat /proc/interrupts
albercik:~ # cat /proc/interrupts; sleep 10; cat /proc/interrupts
CPU0 CPU1
0: 1159492 0 local-APIC-edge timer
1: 6892 1692 IO-APIC-edge i8042
8: 0 0 IO-APIC-edge rtc
12: 156 110 IO-APIC-edge i8042
14: 29613 11409 IO-APIC-edge ide0
16: 23365 21934 IO-APIC-fasteoi sata_sil, HDA Intel
18: 196 88386 IO-APIC-fasteoi bcm43xx
19: 744874 279433 IO-APIC-fasteoi ohci_hcd:usb1, ohci_hcd:usb2, ehci_hcd:usb3
20: 2 4 IO-APIC-fasteoi ohci1394, yenta, tifm_7xx1, sdhci:slot0
21: 1408 592 IO-APIC-fasteoi acpi
NMI: 0 0 Non-maskable interrupts
LOC: 0 1158220 Local interrupts
RES: 260520 295387 Rescheduling interrupts
CAL: 419 652 function call interrupts
TLB: 864 541 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
SPU: 0 0 Spurious interrupts
ERR: 13
CPU0 CPU1
0: 1161996 0 local-APIC-edge timer
1: 6893 1692 IO-APIC-edge i8042
8: 0 0 IO-APIC-edge rtc
12: 156 110 IO-APIC-edge i8042
14: 29703 11409 IO-APIC-edge ide0
16: 23393 21934 IO-APIC-fasteoi sata_sil, HDA Intel
18: 196 88490 IO-APIC-fasteoi bcm43xx
19: 747268 279433 IO-APIC-fasteoi ohci_hcd:usb1, ohci_hcd:usb2, ehci_hcd:usb3
20: 2 4 IO-APIC-fasteoi ohci1394, yenta, tifm_7xx1, sdhci:slot0
21: 1412 592 IO-APIC-fasteoi acpi
NMI: 0 0 Non-maskable interrupts
LOC: 0 1160723 Local interrupts
RES: 260567 295433 Rescheduling interrupts
CAL: 419 652 function call interrupts
TLB: 866 543 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
SPU: 0 0 Spurious interruptsERR: 13
albercik:~ #
Quoted 21 lines · Rafael J. Wysocki
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
As i can see from the log, you are booting on computer with dualcore AMD processor. Do you have C1E feature enabled?
That's possible, how to check?
Quoted 10 lines
Quoted 10 lines
Quoted 3 lines
i386 kernel disable lapic on dualcore AMD with C1E support (see
http://lkml.org/lkml/2007/3/29/199).x86_64kernel do not have this patch still (it's required for tickless kernel only).Well it is required for non tickless mode as well.
Quoted 3 lines
As result, if
you runx86_64kernel with hrt patch on such computer, the system will stall during boot on lapic timer calibration.Quoted 5 lines
Quoted 1 line
Thanks for the reminder. I have a look into this.
Can you please boot mainline and provide the output of:
# cat /proc/interrupts; sleep 10; cat /proc/interrupts
Quoted 7 lines
albercik:~ # cat
/proc/interrupts; sleep 10; cat/proc/interrupts
CPU0 CPU1
0: 1159492 0 local-APIC-edge timer
LOC: 0 1158220 Local interrupts0: 1161996 0 local-APIC-edge timer
LOC: 0 1160723 Local interrupts
Hmm. That's strange. It looks like the local apic timer is not used, but x86_64 definitely lacks the above check. Can you please remove/disable the acpi processor module and recheck ?
tglx
Quoted 27 lines · Thomas Gleixner
Quoted 26 lines · Rafael J. Wysocki
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
As i can see from the log, you are booting on computer with dualcore AMD processor. Do you have C1E feature enabled?
That's possible, how to check?
Quoted 10 lines
Quoted 10 lines
Quoted 3 lines
i386 kernel disable lapic on dualcore AMD with C1E support (see
http://lkml.org/lkml/2007/3/29/199).x86_64kernel do not have this patch still (it's required for tickless kernel only).Well it is required for non tickless mode as well.
Quoted 3 lines
As result, if
you runx86_64kernel with hrt patch on such computer, the system will stall during boot on lapic timer calibration.Quoted 5 lines
Quoted 1 line
Thanks for the reminder. I have a look into this.
Can you please boot mainline and provide the output of:
# cat /proc/interrupts; sleep 10; cat /proc/interruptsalbercik:~ # cat
/proc/interrupts; sleep 10; cat/proc/interrupts
CPU0 CPU1
0: 1159492 0 local-APIC-edge timer
LOC: 0 1158220 Local interrupts
Quoted 5 lines
Quoted 2 lines
0: 1161996 0 local-APIC-edge timer
LOC: 0 1160723 Local interruptsHmm. That's strange. It looks like the local apic timer is not used, but
x86_64definitely lacks the above check.
Ouch, sorry. This is from the kernel booted with "noapictimer".
I'll get the correct output in a little while.
Greetings,
Rafael
Quoted 31 lines · Rafael J. Wysocki
Quoted 30 lines · Thomas Gleixner
Quoted 28 lines · Rafael J. Wysocki
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
As i can see from the log, you are booting on computer with dualcore AMD processor. Do you have C1E feature enabled?
That's possible, how to check?
Quoted 10 lines
Quoted 10 lines
Quoted 3 lines
i386 kernel disable lapic on dualcore AMD with C1E support (see
http://lkml.org/lkml/2007/3/29/199).x86_64kernel do not have this patch still (it's required for tickless kernel only).Well it is required for non tickless mode as well.
Quoted 3 lines
As result, if
you runx86_64kernel with hrt patch on such computer, the system will stall during boot on lapic timer calibration.Quoted 5 lines
Quoted 1 line
Thanks for the reminder. I have a look into this.
Can you please boot mainline and provide the output of:
# cat /proc/interrupts; sleep 10; cat /proc/interruptsalbercik:~ # cat
/proc/interrupts; sleep 10; cat/proc/interrupts
CPU0 CPU1
0: 1159492 0 local-APIC-edge timer
LOC: 0 1158220 Local interrupts0: 1161996 0 local-APIC-edge timer
LOC: 0 1160723 Local interrupts
Quoted 6 lines
Quoted 2 lines
Hmm. That's strange. It looks like the local apic timer is not used, but
x86_64definitely lacks the above check.Ouch, sorry. This is from the kernel booted with "noapictimer".
I'll get the correct output in a little while.
OK, this one is from -rc7 with no extra command line:
albercik:~ # cat /proc/interrupts; sleep 10; cat /proc/interrupts
CPU0 CPU1
0: 27311 0 local-APIC-edge timer
1: 1 77 IO-APIC-edge i8042
8: 0 0 IO-APIC-edge rtc
12: 0 148 IO-APIC-edge i8042
14: 19 683 IO-APIC-edge ide0
16: 178 12443 IO-APIC-fasteoi sata_sil, HDA Intel
19: 111 15197 IO-APIC-fasteoi ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd:usb3
20: 0 3 IO-APIC-fasteoi tifm_7xx1, yenta, sdhci:slot0, ohci1394
21: 0 113 IO-APIC-fasteoi acpi
NMI: 0 0
LOC: 27270 27119
ERR: 2
CPU0 CPU1
0: 29815 0 local-APIC-edge timer
1: 1 77 IO-APIC-edge i8042
8: 0 0 IO-APIC-edge rtc
12: 0 148 IO-APIC-edge i8042
14: 20 772 IO-APIC-edge ide0
16: 178 12451 IO-APIC-fasteoi sata_sil, HDA Intel
19: 112 17199 IO-APIC-fasteoi ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd:usb3
20: 0 3 IO-APIC-fasteoi tifm_7xx1, yenta, sdhci:slot0, ohci1394
21: 0 117 IO-APIC-fasteoi acpi
NMI: 0 0
LOC: 29774 29623
ERR: 2albercik:~ #
Greetings,
Rafael