: Add support for the RDC R-321x SoC
PATCH 3/4 : Add support for the RDC R-321x SoC
This patch adds support for the RDC R-321x system-on-chip, also known as R-861x-(G). It uses the generic GPIO API and has support for the on-chip hardware watchdog.
Signed-off-by Florian Fainelli <[email protected]>
--- arch/i386/Kconfig | 13 ++- arch/i386/Makefile | 5 + arch/x86/mach-rdc321x/Makefile | 5 + arch/x86/mach-rdc321x/gpio.c | 91 +++++++++ arch/x86/mach-rdc321x/platform.c | 68 +++++++ arch/x86/mach-rdc321x/wdt.c | 275 +++++++++++++++++++++++++++ include/asm-x86/mach-rdc321x/gpio.h | 56 ++++++ include/asm-x86/mach-rdc321x/rdc321x_defs.h | 6 + include/asm-x86/timex.h | 2 + 9 files changed, 520 insertions(+), 1 deletions(-) create mode 100644 arch/x86/mach-rdc321x/Makefile create mode 100644 arch/x86/mach-rdc321x/gpio.c create mode 100644 arch/x86/mach-rdc321x/platform.c create mode 100644 arch/x86/mach-rdc321x/wdt.c create mode 100644 include/asm-x86/mach-rdc321x/gpio.h create mode 100644 include/asm-x86/mach-rdc321x/rdc321x_defs.h
arch/i386/Kconfig +12 -1
@@ -170,6 +170,17 @@ config X86_NUMAQ You will need a new lynxer.elf file to flash your firmware with - send email to <[email protected]>. +config X86_RDC321X + bool "RDC R-321x SoC" + select M486 + select X86_REBOOTFIXUPS + select GENERIC_GPIO + select LEDS_GPIO + help + This option is needed for RDC R-321x system-on-chip, also known + as R-8610-(G). + If you don't have one of these chips, you should say N here. + config X86_SUMMIT bool "Summit/EXA (IBM x440)" depends on SMP
@@ -463,7 +474,7 @@ config X86_REBOOTFIXUPS system. Currently, the only fixup is for the Geode machines using - CS5530A and CS5536 chipsets. + CS5530A and CS5536 chipsets and the RDC R-321x SoC. Say Y if you want to enable the fixup. Currently, it's safe to enable this option even if you don't need it.
arch/i386/Makefile +5 -0
@@ -82,6 +82,11 @@ mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default +# RDC R-321x subarch support +mflags-$(CONFIG_X86_RDC321X) := -Iinclude/asm-x86/mach-rdc321x +mcore-$(CONFIG_X86_RDC321X) := arch/x86/mach-default +core-$(CONFIG_X86_RDC321X) += arch/x86/mach-rdc321x/ + #Summit subarch support mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default
arch/x86/mach-rdc321x/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# +# Makefile for the RDC321x specific parts of the kernel +# +obj-$(CONFIG_X86_RDC321X) := gpio.o platform.o wdt.o +
arch/x86/mach-rdc321x/gpio.c new file +91 -0
91 lines not on this page · raw message
arch/x86/mach-rdc321x/platform.c new file +68 -0
68 lines not on this page · raw message
arch/x86/mach-rdc321x/wdt.c new file +275 -0
275 lines not on this page · raw message
include/asm-x86/mach-rdc321x/gpio.h new file +56 -0
56 lines not on this page · raw message
include/asm-x86/mach-rdc321x/rdc321x_defs.h new file +6 -0
@@ -0,0 +1,6 @@ +#define PFX "rdc321x: " + +/* General purpose configuration and data registers */ +#define RDC3210_CFGREG_ADDR 0x0CF8 +#define RDC3210_CFGREG_DATA 0x0CFC +#define RDC_MAX_GPIO 0x3A
include/asm-x86/timex.h +2 -0
@@ -7,6 +7,8 @@#ifdef CONFIG_X86_ELAN # define PIT_TICK_RATE 1189200/* AMD Elan has different frequency! */ +#elif defined(CONFIG_X86_RDC321X ) +# define PIT_TICK_RATE 1041667/* Underlying HZ for R8610 */ #else # define PIT_TICK_RATE 1193182/* Underlying HZ */ #endif
arch/x86/mach-rdc321x/wdt.c line 69
Quoted 8 lines · On Tue, 16 Oct 2007 13:41:31 +0200 Florian Fainelli…
arch/x86/mach-rdc321x/wdt.c new file +8
-0+static struct { +struct completion stop; +volatile int running; +struct timer_list timer; +volatile int queue; +int default_ticks; +unsigned long inuse; +} rdc321x_wdt_device;
Why the volatiles? If these actually help then it's probably an indication that something is wrong in the implementation.
Documentation/volatile-considered-harmful.txt has some details.