Skip to contentSkip to conversation

PDA Suspend SA1100

DISCUSSION Kristoffer Ericson 2 participants 3 messages Oct 18, 2007 – Oct 20, 2007

lore
Share & tools
lore
#0 lore raw

Greetings,

I've been trying to implement proper suspend on my jornada 720 machine. But as far as I can see it never reaches the sa11x0_suspend code.

I've linked power button event to produce APM_SUSPEND and I can see that it says "Stopping TASKS ======". It then blanks screen but keeps LCD powerd. I know it goes into resume again since removing backlight code in resume function effectivly turns off the LCD.

Im assuming that it tries to suspend but fails at some point and tries to return into normal operations? Exactly what is needed to get the suspend procedure happy? Does every driver need to have suspend/resume code?

Best wishes
Kristoffer Ericson

#1 lore raw
Quoted 11 lines · Kristoffer Ericson

Greetings,

I've been trying to implement proper suspend on my jornada 720 machine. But as far as I can see it never reaches the sa11x0_suspend code.

I've linked power button event to produce APM_SUSPEND and I can see that it says "Stopping TASKS ======". It then blanks screen but keeps LCD powerd. I know it goes into resume again since removing backlight code in resume function effectivly turns off the LCD.

Im assuming that it tries to suspend but fails at some point and tries to return into normal operations? Exactly what is needed to get the suspend procedure happy? Does every driver need to have suspend/resume code?

I don't think so. Unless a driver feels it necessary to take some action, no suspend/resume
will not cause the whole system to fail. However,

1) if any driver suspend code returns error, the whole procedure will stop
2) and instable wake-up source (like glitch on wake-up GPIO pin) or incorrect setting (like
wake up from RTC but set the interval to be 0) will also cause the immediate resume

check "sa11x0_suspend" print out won't work since the console has already been suspended, try DISABLE_CONSOLE_SUSPEND or other ways

- eric

Quoted 9 lines

Best wishes
Kristoffer Ericson
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
Quoted 10 lines · On Fri, 19 Oct 2007 08:56:18 +0800 "eric miao" <[email protected]> wrote:
Quoted 9 lines · Kristoffer Ericson

Greetings,

I've been trying to implement proper suspend on my jornada 720 machine. But as far as I can see it never reaches the sa11x0_suspend code.

I've linked power button event to produce APM_SUSPEND and I can see that it says "Stopping TASKS ======". It then blanks screen but keeps LCD powerd. I know it goes into resume again since removing backlight code in resume function effectivly turns off the LCD.

Quoted 6 lines
Quoted 2 lines

Im assuming that it tries to suspend but fails at some point and tries to return into normal operations? Exactly what is needed to get the suspend procedure happy? Does every driver need to have suspend/resume code?

I don't think so. Unless a driver feels it necessary to take some action, no suspend/resume
will not cause the whole system to fail. However,

Ah, good to know.

Quoted 6 lines

1) if any driver suspend code returns error, the whole procedure will stop
2) and instable wake-up source (like glitch on wake-up GPIO pin) or incorrect setting (like
wake up from RTC but set the interval to be 0) will also cause the immediate resume

I'll start running through the different drivers to see if I can spot anything obvious.

Quoted 15 lines

check "sa11x0_suspend" print out won't work since the console has already been suspended, try DISABLE_CONSOLE_SUSPEND or other ways

- eric

Quoted 9 lines

Best wishes
Kristoffer Ericson
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 1 line
Kristoffer Ericson <[email protected]>