DBT120 B4 not working

Hi, I have a bluetooth device D-link DBT120 revision B4 with a kernel 2.6.18 with a debian etch stable (bluez-hcidump-1.32-1, bluez-utils-3.7.1, bluez-firmware-1.2-1 and other package for kde).

on messages:
kernel: usb 5-1.4: new full speed USB device using ehci_hcd and address 6
kernel: usb 5-1.4: configuration #1 chosen from 1 choice
kernel: Bluetooth: HCI USB driver ver 2.9
kernel: usbcore: registered new driver hci_usb
on syslog:
kernel: hci_usb_intr_rx_submit: hci0 intr rx submit failed urb cdcb6654 err -28
kernel: hci_usb_intr_rx_submit: hci0 intr rx submit failed urb f4b749d4 err -28

lsusb show:
Bus 005 Device 010: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

hciconfig:
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:0 errors:0
hciconfig hci0 up
Can't init device hci0: Input/output error (5)

strace hciconfig hci0 up:

 socket(PF_BLUETOOTH, SOCK_RAW, 1)       = 3
 ioctl(3, 0x800448d3, 0x805d300)         = 0
 ioctl(3, 0x400448c9, 0)                 = -1 EIO (Input/output error)

write(2, "Can\'t init device hci0: Input/ou"..., 47Can't init device hci0:
Input/output error (5)

I have a motherboard with VIA VT82 UHCI USB controller...in the past mail i read about a user "Marcel Holtmann" having the same problem with kernel 2.6.5 but i cannot find the earlier post with the solution...
Any help will be appreciate.

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Hi,

use a newer kernel. The 2.6.5 is ancient and most USB issues have been fixed. However this is not really a Bluetooth issue. It is an USB problem or hardware problem. And to make it clear. It is not the dongle. I have a bunch of them, they work.

Regards

Marcel

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Alle 11:25, luned=EC 22 ottobre 2007, Marcel Holtmann ha scritto:

Hi! ...but i'm not using the 2.6.5 :-) I'm using the 2.6.18! Can you tell me wich kernel are you using with d-link dongle?

Thanks

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users