libata PATA status for VIA 8237
Hi all :)
I'm thinking about switching fully to libata in the near future (currently I'm using CONFIG_IDE for all my PATA drives, both hard disks and DVD recorder), and I was wondering if PATA support for VIA8237 was full or not. For what I've googled, it seems that it is usable both for PATA and for SATA, but I want to be sure.
If I'm asking here is because I have SATA support for my VIA chipset enabled in the kernel (CONFIG_SATA_VIA), but I'm getting these messages:
sata_via 0000:00:0c.0: version 2.0
sata_via 0000:00:0c.0: routed to hard irq line 10
ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE0A bmdma 0xFA00 irq 10
ata2: SATA max UDMA/133 cmd 0xFD00 ctl 0xFD0A bmdma 0xFA08 irq 10
scsi0 : sata_via
ata1: SATA link down (SStatus 0 SControl 310)Quoted 1 line
Quoted 1 line
ATA: abnormal status
0x7Fon port0xFE07
scsi1 : sata_via
ata2: SATA link down (SStatus 0 SControl 310)
Quoted 1 line
Quoted 1 line
ATA: abnormal status
0x7Fon port0xFD07
sata_via 0000:00:0f.0: routed to hard irq line 11
ata3: SATA max UDMA/133 cmd 0xF900 ctl 0xF802 bmdma 0xF500 irq 11
ata4: SATA max UDMA/133 cmd 0xF700 ctl 0xF602 bmdma 0xF508 irq 11
scsi2 : sata_via
ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)Quoted 1 line
Quoted 1 line
ATA: abnormal status
0x7Fon port0xF907
scsi3 : sata_via
ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Quoted 1 line
Quoted 1 line
ATA: abnormal status
0x7Fon port0xF707
Since I don't have any SATA disk on my system, I haven't given any importance to these messages, but now that I want to switch to libata, I'm concerned. I don't understand the marked messages, and I don't know if they have to do with CONFIG_IDE and CONFIG_BLK_DEV_VIA82CXXX being enabled together with CONFIG_SATA_VIA.
My kernel is 2.6.20.18 and my mobo has three PATA busses and four SATA ports (which I think they are ata1-ata4 in the messages above. I don't know why only two of them are marked as 1.5Gbps, according to the mobo manual, all four are 1.5Gbps).
Thanks a lot in advance and feel free to ask if you need more information about hardware or software.
Raúl Núñez de Arenas Coronado
Signature · 3 lines
Linux Registered User 88736 | http://www.dervishd.net It's my PC and I'll cry if I want to... RAmen! We are waiting for 13 Feb 2009 23:31:30 +0000 ...
Quoted 19 lines · DervishD
I'm thinking about switching fully to libata in the near future (currently I'm using
CONFIG_IDEfor all my PATA drives, both hard disks and DVD recorder), and I was wondering if PATA support for VIA8237 was full or not. For what I've googled, it seems that it is usable both for PATA and for SATA, but I want to be sure.If I'm asking here is because I have SATA support for my VIA chipset enabled in the kernel (
CONFIG_SATA_VIA), but I'm getting these messages:sata_via 0000:00:0c.0: version 2.0 sata_via 0000:00:0c.0: routed to hard irq line 10 ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE0A bmdma 0xFA00 irq 10 ata2: SATA max UDMA/133 cmd 0xFD00 ctl 0xFD0A bmdma 0xFA08 irq 10 scsi0 : sata_via ata1: SATA link down (SStatus 0 SControl 310)Quoted 1 line
Quoted 1 line
ATA: abnormal status
0x7Fon port0xFE07scsi1 :
sata_via
ata2: SATA link down (SStatus 0 SControl 310)Quoted 1 line
Quoted 1 line
ATA: abnormal status
0x7Fon port0xFD07
Quoted 9 lines
sata_via 0000:00:0f.0: routed to hard irq line 11 ata3: SATA max UDMA/133 cmd 0xF900 ctl 0xF802 bmdma 0xF500 irq 11 ata4: SATA max UDMA/133 cmd 0xF700 ctl 0xF602 bmdma 0xF508 irq 11 scsi2 : sata_via ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)Quoted 1 line
Quoted 1 line
ATA: abnormal status
0x7Fon port0xF907scsi3 :
sata_via
ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)Quoted 1 line
Quoted 1 line
ATA: abnormal status
0x7Fon port0xF707
I saw those too from times to times on boot with a VIA VT6421 with no consequences.
So I would say they're non important (but who know for real until you test with real disk attached?)
Hi Thierry :)
* Thierry Vignaud <[email protected]> dixit:
Quoted 26 lines
Quoted 25 lines · DervishD
I'm thinking about switching fully to libata in the near future (currently I'm using
CONFIG_IDEfor all my PATA drives, both hard disks and DVD recorder), and I was wondering if PATA support for VIA8237 was full or not. For what I've googled, it seems that it is usable both for PATA and for SATA, but I want to be sure.If I'm asking here is because I have SATA support for my VIA chipset enabled in the kernel (
CONFIG_SATA_VIA), but I'm getting these messages:sata_via 0000:00:0c.0: version 2.0 sata_via 0000:00:0c.0: routed to hard irq line 10 ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE0A bmdma 0xFA00 irq 10 ata2: SATA max UDMA/133 cmd 0xFD00 ctl 0xFD0A bmdma 0xFA08 irq 10 scsi0 : sata_via ata1: SATA link down (SStatus 0 SControl 310)Quoted 1 line
Quoted 1 line
ATA: abnormal status
0x7Fon port0xFE07scsi1 :
sata_via
ata2: SATA link down (SStatus 0 SControl 310)Quoted 1 line
Quoted 1 line
ATA: abnormal status
0x7Fon port0xFD07sata_via 0000:00:0f.0: routed to hard irq line 11 ata3: SATA max UDMA/133 cmd 0xF900 ctl 0xF802 bmdma 0xF500 irq 11 ata4: SATA max UDMA/133 cmd 0xF700 ctl 0xF602 bmdma 0xF508 irq 11 scsi2 : sata_via ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)Quoted 1 line
Quoted 1 line
ATA: abnormal status
0x7Fon port0xF907
Quoted 8 lines
Quoted 3 lines
scsi3 :
sata_via
ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)Quoted 1 line
Quoted 1 line
ATA: abnormal status
0x7Fon port0xF707I saw those too from times to times on boot with a VIA VT6421 with no consequences.
So I would say they're non important (but who know for real until you test with real disk attached?)
I think I can manage to get a SATA disk to make tests, but the problem is that I won't be able to make destructive (destroying the data, I mean, not the hardware XD) tests on it :((
Merci :)
Raúl Núñez de Arenas Coronado
Signature · 3 lines
Linux Registered User 88736 | http://www.dervishd.net It's my PC and I'll cry if I want to... RAmen! We are waiting for 13 Feb 2009 23:31:30 +0000 ...