: platform setup for 5272 ColdFire UARTs
Switch to platform style configuration for 5272 ColdFire UARTs.
Signed-off-by Greg Ungerer <[email protected]>
---
arch/m68knommu/platform/5272/config.c +69 -7
@@ -13,11 +13,12 @@#include <linux/param.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <asm/dma.h> #include <asm/machdep.h> +#include <asm/dma.h> +#include <asm/io.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> -#include <asm/mcfdma.h> +#include <asm/mcfuart.h> /***************************************************************************/
@@ -48,6 +49,60 @@ unsigned int dma_device_address[MAX_M68K/***************************************************************************/ +static struct mcf_platform_uart m5272_uart_platform[] = { + { + .mapbase =MCF_MBAR +MCFUART_BASE1 , + .irq =73 , + }, + { + .mapbase =MCF_MBAR +MCFUART_BASE2 , + .irq =74 , + }, + { }, +}; + +static struct platform_device m5272_uart = { + .name ="mcfuart" , + .id =0 , + .dev.platform_data = m5272_uart_platform, +}; + +static struct platform_device *m5272_devices[]__initdata = { + &m5272_uart, +}; + +/***************************************************************************/ + +static void __init m5272_uart_init_line (int line,int irq) +{ +u32 v; + +if ((line >=0 ) && (line <2 )) { + v = (line) ?0x0e000000 :0xe0000000 ; +writel (v,MCF_MBAR +MCFSIM_ICR2 ); + +/* Enable the output lines for the serial ports */ + v =readl (MCF_MBAR +MCFSIM_PBCNT ); + v = (v & ~0x000000ff ) |0x00000055 ; +writel (v,MCF_MBAR +MCFSIM_PBCNT ); + + v =readl (MCF_MBAR +MCFSIM_PDCNT ); + v = (v & ~0x000003fc ) |0x000002a8 ; +writel (v,MCF_MBAR +MCFSIM_PDCNT ); + } +} + +static void __init m5272_uarts_init (void ) +{ +const int nrlines =ARRAY_SIZE (m5272_uart_platform); +int line; + +for (line =0 ; (line < nrlines); line++) +m5272_uart_init_line (line, m5272_uart_platform[line].irq); +} + +/***************************************************************************/ +void mcf_disableall (void ) {volatile unsigned long *icrp;
@@ -93,7 +148,7 @@ int mcf_timerirqpending(int timer)/***************************************************************************/ -void config_BSP (char *commandp,int size) +void __init config_BSP (char *commandp,int size) {#if defined (CONFIG_MOD5272 )volatile unsigned char *pivrp;
@@ -109,10 +164,6 @@ void config_BSP(char *commandp, int size/* Copy command line from FLASH to local buffer... */ memcpy (commandp, (char *)0xf0004000 , size); commandp[size-1 ] =0 ; -#elif defined(CONFIG_MTD_KeyTechnology) -/* Copy command line from FLASH to local buffer... */ -memcpy (commandp, (char *)0xffe06000 , size); - commandp[size-1 ] =0 ;#elif defined(CONFIG_CANCam)/* Copy command line from FLASH to local buffer... */ memcpy (commandp, (char *)0xf0010000 , size);
@@ -125,3 +176,14 @@ void config_BSP(char *commandp, int size }/***************************************************************************/ + +static int __init init_BSP (void ) +{ +m5272_uarts_init (); +platform_add_devices (m5272_devices,ARRAY_SIZE (m5272_devices)); +return 0 ; +} + +arch_initcall (init_BSP); + +/***************************************************************************/