Skip to contentSkip to conversation

urgent! linux 2.6.16 network bridge crash

DISCUSSION auther_bin 2 participants 2 messages Nov 3, 2007

Subsystems (2)
lore
Share & tools
lore

auther_bin

author
#0 lore raw

Hello friends, I have config my linux box works as a network bridge. and up/down switch is both cisco 35xx works with vlan. but when i connect it into the network the box crashed right now. Puzzled!

btw, in the down(intranet) switch we connect 8 wireless AP.

tcpdump gives many many broadcast package like:

time serial M SRC_MAC > 1:0:0:0:0:0 sap aa ui/C

what's it?
flood? or the AP package or the cisco vlan? but whatever it is, the box should not be crashed by it, right?

if the box do not use bridge, it will not crash at all.

#1 lore raw

auther_bin wrote, On 11/03/2007 12:11 PM:

Quoted 8 lines

Hello friends, I have config my linux box works as a network bridge. and up/down switch is both cisco 35xx works with vlan. but when i connect it into the network the box crashed right now. Puzzled!

btw, in the down(intranet) switch we connect 8 wireless AP.

tcpdump gives many many broadcast package like:

Quoted 7 lines

time serial M SRC_MAC > 1:0:0:0:0:0 sap aa ui/C

what's it?
flood? or the AP package or the cisco vlan? but whatever it is, the box should not be crashed by it, right?

if the box do not use bridge, it will not crash at all.

Hi friend,

There is not much information (crash is more crash or more lockup?), so you can only guess. Looks like a multicast problem (vs. vlan or bridge). Maybe because of wrong MAC like here:

http://lkml.org/lkml/2007/5/12/83

Otherwise you should try to enable and send more debbugging.

Regards,
Jarek P.