ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t
PATCH 9/13 ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t
* Make ide_dma_off_quietly() and __ide_dma_on() always available.
* Drop "__" prefix from __ide_dma_on().
* Check for presence of ->dma_host_on instead of ->ide_dma_on.
* Convert all users of ->ide_dma_on and ->dma_off_quietly methods to use ide_dma_on() and ide_dma_off_quietly() instead.
* Remove no longer needed ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t.
* Make ide_dma_on() void.
There should be no functionality changes caused by this patch.
--- drivers/ide/arm/icside.c | 16 ---------------- drivers/ide/ide-dma.c | 30 +++++++++++++----------------- drivers/ide/ide-io.c | 8 ++++---- drivers/ide/ide-iops.c | 10 +++++----- drivers/ide/ide-probe.c | 2 +- drivers/ide/ide.c | 4 +--- drivers/ide/mips/au1xxx-ide.c | 16 ---------------- drivers/ide/pci/sc1200.c | 2 +- drivers/ide/pci/sgiioc4.c | 19 ------------------- drivers/ide/ppc/pmac.c | 2 -- include/linux/ide.h | 8 ++++---- 11 files changed, 29 insertions(+), 88 deletions(-)
drivers/ide/arm/icside.c +0 -16
@@ -291,24 +291,10 @@ static void icside_dma_host_off(ide_driv { } -static void icside_dma_off_quietly (ide_drive_t *drive) -{ - drive->using_dma =0 ; -ide_toggle_bounce (drive,0 ); -} -static void icside_dma_host_on (ide_drive_t *drive) { } -static int icside_dma_on (ide_drive_t *drive) -{ - drive->using_dma =1 ; -ide_toggle_bounce (drive,1 ); - -return 0 ; -} -static int icside_dma_end (ide_drive_t *drive) {ide_hwif_t *hwif =HWIF (drive);
@@ -425,9 +411,7 @@ static void icside_dma_init(ide_hwif_t * hwif->set_dma_mode = icside_set_dma_mode; hwif->dma_host_off = icside_dma_host_off; - hwif->dma_off_quietly = icside_dma_off_quietly; hwif->dma_host_on = icside_dma_host_on; - hwif->ide_dma_on = icside_dma_on; hwif->dma_setup = icside_dma_setup; hwif->dma_exec_cmd = icside_dma_exec_cmd; hwif->dma_start = icside_dma_start;
drivers/ide/ide-dma.c +13 -17
@@ -424,6 +424,7 @@ void ide_dma_host_off(ide_drive_t *drive }EXPORT_SYMBOL (ide_dma_host_off); +#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ /** * ide_dma_off_quietly - Generic DMA kill
@@ -441,7 +442,6 @@ void ide_dma_off_quietly(ide_drive_t *dr }EXPORT_SYMBOL (ide_dma_off_quietly); -#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ /** * ide_dma_off - disable DMA on a device
@@ -454,7 +454,7 @@ EXPORT_SYMBOL(ide_dma_off_quietly);void ide_dma_off (ide_drive_t *drive) {printk (KERN_INFO "%s: DMA disabled\n" , drive->name); - drive->hwif->dma_off_quietly (drive); +ide_dma_off_quietly (drive); }EXPORT_SYMBOL (ide_dma_off);
@@ -480,26 +480,26 @@ void ide_dma_host_on(ide_drive_t *drive) }EXPORT_SYMBOL (ide_dma_host_on); +#endif /** -* __ide_dma_on - Enable DMA on a device +* ide_dma_on - Enable DMA on a device * @drive: drive to enable DMA on * * Enable IDE DMA for a device on this IDE controller. */ - -int __ide_dma_on (ide_drive_t *drive) + +void ide_dma_on (ide_drive_t *drive) { drive->using_dma =1 ;ide_toggle_bounce (drive,1 ); drive->hwif->dma_host_on (drive); - -return 0 ; } -EXPORT_SYMBOL (__ide_dma_on); +EXPORT_SYMBOL (ide_dma_on); +#ifdef CONFIG_BLK_DEV_IDEDMA_PCI /** * ide_dma_setup - begin a DMA phase * @drive: target device
@@ -854,15 +854,13 @@ void ide_dma_verbose(ide_drive_t *drive)return ; bug_dma_off:printk (", BUG DMA OFF" ); - hwif->dma_off_quietly (drive); -return ; +ide_dma_off_quietly (drive); }EXPORT_SYMBOL (ide_dma_verbose);int ide_set_dma (ide_drive_t *drive) { -ide_hwif_t *hwif = drive->hwif;int rc;/*
@@ -871,13 +869,15 @@ int ide_set_dma(ide_drive_t *drive)* things, if not checked and cleared. * PARANOIA!!! */ - hwif->dma_off_quietly (drive); +ide_dma_off_quietly (drive); rc =ide_dma_check (drive);if (rc)return rc; -return hwif->ide_dma_on (drive); +ide_dma_on (drive); + +return 0 ; }#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
@@ -1014,12 +1014,8 @@ void ide_setup_dma(ide_hwif_t *hwif, unsif (!(hwif->dma_prdtable)) hwif->dma_prdtable = (hwif->dma_base +4 ); -if (!hwif->dma_off_quietly) - hwif->dma_off_quietly = &ide_dma_off_quietly;if (!hwif->dma_host_off) hwif->dma_host_off = &ide_dma_host_off; -if (!hwif->ide_dma_on) - hwif->ide_dma_on = &__ide_dma_on;if (!hwif->dma_host_on) hwif->dma_host_on = &ide_dma_host_on;if (!hwif->dma_setup)
drivers/ide/ide-io.c +4 -4
@@ -75,7 +75,7 @@ static int __ide_end_request(ide_drive_t*/ if (drive->state ==DMA_PIO_RETRY && drive->retry_pio <=3 ) { drive->state =0 ; -HWGROUP (drive)->hwif->ide_dma_on (drive); +ide_dma_on (drive); }if (!end_that_request_chunk (rq, uptodate, nr_bytes)) {
@@ -219,7 +219,7 @@ static ide_startstop_t ide_start_power_s* we could be smarter and check for current xfer_speed * in struct drive etc... */ -if (drive->hwif->ide_dma_on ==NULL ) +if (drive->hwif->dma_host_on ==NULL )break ;/* * TODO: respect ->using_dma setting
@@ -787,7 +787,7 @@ static ide_startstop_t do_special (ide_dif (hwif->host_flags &IDE_HFLAG_SET_PIO_MODE_KEEP_DMA ) {if (keep_dma) - hwif->ide_dma_on (drive); +ide_dma_on (drive); } }
@@ -1332,7 +1332,7 @@ static ide_startstop_t ide_dma_timeout_r*/ drive->retry_pio++; drive->state =DMA_PIO_RETRY ; - hwif->dma_off_quietly (drive); +ide_dma_off_quietly (drive);/* * un-busy drive etc (hwgroup->busy is cleared on return) and
drivers/ide/ide-iops.c +5 -5
@@ -739,7 +739,7 @@ int ide_config_drive_speed(ide_drive_t *// msleep(50); #ifdef CONFIG_BLK_DEV_IDEDMA -if (hwif->ide_dma_on)/* check if host supports DMA */ +if (hwif->dma_host_on)/* check if host supports DMA */ hwif->dma_host_off (drive);#endif
@@ -793,8 +793,8 @@ int ide_config_drive_speed(ide_drive_t *#ifdef CONFIG_BLK_DEV_IDEDMA if (speed >=XFER_SW_DMA_0 || (hwif->host_flags &IDE_HFLAG_VDMA )) hwif->dma_host_on (drive); -else if (hwif->ide_dma_on)/* check if host supports DMA */ - hwif->dma_off_quietly (drive); +else if (hwif->dma_host_on)/* check if host supports DMA */ +ide_dma_off_quietly (drive);#endif switch (speed) {
@@ -1004,10 +1004,10 @@ static void check_dma_crc(ide_drive_t *d {#ifdef CONFIG_BLK_DEV_IDEDMA if (drive->crc_count) { - drive->hwif->dma_off_quietly (drive); +ide_dma_off_quietly (drive);ide_set_xfer_rate (drive,ide_auto_reduce_xfer (drive));if (drive->current_speed >=XFER_SW_DMA_0 ) - (void )HWIF (drive)->ide_dma_on (drive); +ide_dma_on (drive); }else ide_dma_off (drive);#endif
drivers/ide/ide-probe.c +1 -1
@@ -840,7 +840,7 @@ static void probe_hwif(ide_hwif_t *hwif) drive->nice1 =1 ; -if (hwif->ide_dma_on) +if (hwif->dma_host_on)ide_set_dma (drive); } }
drivers/ide/ide.c +1 -3
@@ -437,8 +437,6 @@ static void ide_hwif_restore(ide_hwif_t hwif->dma_exec_cmd = tmp_hwif->dma_exec_cmd; hwif->dma_start = tmp_hwif->dma_start; hwif->ide_dma_end = tmp_hwif->ide_dma_end; - hwif->ide_dma_on = tmp_hwif->ide_dma_on; - hwif->dma_off_quietly = tmp_hwif->dma_off_quietly; hwif->ide_dma_test_irq = tmp_hwif->ide_dma_test_irq; hwif->ide_dma_clear_irq = tmp_hwif->ide_dma_clear_irq; hwif->dma_host_on = tmp_hwif->dma_host_on;
@@ -830,7 +828,7 @@ int set_using_dma(ide_drive_t *drive, inif (!drive->id || !(drive->id->capability &1 )) goto out; -if (hwif->ide_dma_on ==NULL ) +if (hwif->dma_host_on ==NULL ) goto out; err = -EBUSY ;
drivers/ide/mips/au1xxx-ide.c +0 -16
@@ -399,24 +399,10 @@ static void auide_dma_host_on(ide_drive_ { } -static int auide_dma_on (ide_drive_t *drive) -{ - drive->using_dma =1 ; -ide_toggle_bounce (drive,1 ); - -return 0 ; -} -static void auide_dma_host_off (ide_drive_t *drive) { } -static void auide_dma_off_quietly (ide_drive_t *drive) -{ - drive->using_dma =0 ; -ide_toggle_bounce (drive,0 ); -} -static void auide_dma_lost_irq (ide_drive_t *drive) {printk (KERN_ERR "%s: IRQ lost\n" , drive->name);
@@ -684,7 +670,6 @@ static int au_ide_probe(struct device *d hwif->set_dma_mode = &auide_set_dma_mode;#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - hwif->dma_off_quietly = &auide_dma_off_quietly; hwif->dma_timeout = &auide_dma_timeout; hwif->mdma_filter = &auide_mdma_filter;
@@ -697,7 +682,6 @@ static int au_ide_probe(struct device *d hwif->dma_host_off = &auide_dma_host_off; hwif->dma_host_on = &auide_dma_host_on; hwif->dma_lost_irq = &auide_dma_lost_irq; - hwif->ide_dma_on = &auide_dma_on;#else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ hwif->channel =0 ; hwif->hold =1 ;
drivers/ide/pci/sc1200.c +1 -1
@@ -220,7 +220,7 @@ static void sc1200_set_pio_mode(ide_driv }if (mode !=-1 ) {printk ("SC1200: %s: changing (U)DMA mode\n" , drive->name); - hwif->dma_off_quietly (drive); +ide_dma_off_quietly (drive);if (ide_set_dma_mode (drive, mode) ==0 ) hwif->dma_host_on (drive);return ;
drivers/ide/pci/sgiioc4.c +0 -19
@@ -277,23 +277,6 @@ sgiioc4_ide_dma_end(ide_drive_t * drive)return dma_stat; } -static int -sgiioc4_ide_dma_on (ide_drive_t * drive) -{ - drive->using_dma =1 ; -ide_toggle_bounce (drive,1 ); - -return 0 ; -} - -static void sgiioc4_dma_off_quietly (ide_drive_t *drive) -{ - drive->using_dma =0 ; -ide_toggle_bounce (drive,0 ); - - drive->hwif->dma_host_off (drive); -} -static void sgiioc4_set_dma_mode (ide_drive_t *drive,const u8 speed) { }
@@ -598,8 +581,6 @@ ide_init_sgiioc4(ide_hwif_t * hwif) hwif->dma_setup = &sgiioc4_ide_dma_setup; hwif->dma_start = &sgiioc4_ide_dma_start; hwif->ide_dma_end = &sgiioc4_ide_dma_end; - hwif->ide_dma_on = &sgiioc4_ide_dma_on; - hwif->dma_off_quietly = &sgiioc4_dma_off_quietly; hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq; hwif->dma_host_on = &sgiioc4_dma_host_on; hwif->dma_host_off = &sgiioc4_dma_host_off;
drivers/ide/ppc/pmac.c +0 -2
@@ -1748,8 +1748,6 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmifreturn ; } - hwif->dma_off_quietly = &ide_dma_off_quietly; - hwif->ide_dma_on = &__ide_dma_on; hwif->dma_setup = &pmac_ide_dma_setup; hwif->dma_exec_cmd = &pmac_ide_dma_exec_cmd; hwif->dma_start = &pmac_ide_dma_start;
include/linux/ide.h +4 -4
@@ -546,8 +546,6 @@ typedef struct hwif_s {void (*dma_exec_cmd)(ide_drive_t *,u8 );void (*dma_start)(ide_drive_t *);int (*ide_dma_end)(ide_drive_t *drive); -int (*ide_dma_on)(ide_drive_t *drive); -void (*dma_off_quietly)(ide_drive_t *drive);int (*ide_dma_test_irq)(ide_drive_t *drive);void (*ide_dma_clear_irq)(ide_drive_t *drive);void (*dma_host_on)(ide_drive_t *drive);
@@ -1148,7 +1146,9 @@ static inline u8 ide_max_dma_mode(ide_drreturn ide_find_dma_mode (drive,XFER_UDMA_6 ); } +void ide_dma_off_quietly (ide_drive_t *);void ide_dma_off (ide_drive_t *); +void ide_dma_on (ide_drive_t *);void ide_dma_verbose (ide_drive_t *);int ide_set_dma (ide_drive_t *);ide_startstop_t ide_dma_intr (ide_drive_t *);
@@ -1161,9 +1161,7 @@ extern int ide_release_dma(ide_hwif_t *)extern void ide_setup_dma (ide_hwif_t *,unsigned long ,unsigned int );void ide_dma_host_off (ide_drive_t *); -void ide_dma_off_quietly (ide_drive_t *);void ide_dma_host_on (ide_drive_t *); -extern int __ide_dma_on (ide_drive_t *);extern int ide_dma_setup (ide_drive_t *);extern void ide_dma_start (ide_drive_t *);extern int __ide_dma_end (ide_drive_t *);
@@ -1174,7 +1172,9 @@ extern void ide_dma_timeout(ide_drive_t#else static inline u8 ide_find_dma_mode (ide_drive_t *drive,u8 speed) {return 0 ; }static inline u8 ide_max_dma_mode (ide_drive_t *drive) {return 0 ; } +static inline void ide_dma_off_quietly (ide_drive_t *drive) { ; }static inline void ide_dma_off (ide_drive_t *drive) { ; } +static inline void ide_dma_on (ide_drive_t *drive) { ; }static inline void ide_dma_verbose (ide_drive_t *drive) { ; }static inline int ide_set_dma (ide_drive_t *drive) {return 1 ; }#endif /* CONFIG_BLK_DEV_IDEDMA */
Quoted 9 lines · Bartlomiej Zolnierkiewicz
* Make
ide_dma_off_quietly()and__ide_dma_on()always available.* Drop "__" prefix from
__ide_dma_on().* Check for presence of ->dma_host_on instead of ->ide_dma_on.
* Convert all users of ->ide_dma_on and ->dma_off_quietly methods to use
ide_dma_on()andide_dma_off_quietly()instead.
Quoted 8 lines
* Remove no longer needed ->ide_dma_on and ->dma_off_quietly methods from
ide_hwif_t.* Make
ide_dma_on()void.There should be no functionality changes caused by this patch.
Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>
MBR, Sergei