Skip to contentSkip to conversation

perfmon Itanium 9100 series support (Montvale)

DISCUSSION Stephane Eranian 2 participants 3 messages Nov 13, 2007 – Nov 14, 2007

lore
Share & tools
lore
#0 lore raw

Hello everyone,

Intel released the Itanium 9100 series (Montvale) a few days ago.

My understanding is that the Montvale PMU is fully compatible with the Montecito PMU (dual-core Itanium 9000 series). Thus, there will not be any patches needed neither at the kernel level, nor in libpfm or pfmon to support this new processor.

Those comments hold true for the mainline perfmon (v2.0) and the development perfmon in GIT (v2.7).

Thanks.

Signature · 1 line
-Stephane
#1 lore raw
Quoted 8 lines · Stephane Eranian

Hello everyone,

Intel released the Itanium 9100 series (Montvale) a few days ago.

My understanding is that the Montvale PMU is fully compatible with the Montecito PMU (dual-core Itanium 9000 series). Thus, there will not be any patches needed neither at the kernel level, nor in libpfm or pfmon to support this new processor.

Perfmon prints out "Montecito PMU" when booted on a Montvale. Updating the message may avoid some confusion.

---
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
---

Both Montvale and Montecito are family 32. Montvale is model 1. Montecito is model 0.

---
saturn1-10:~ # cat /proc/cpuinfo
processor : 0
vendor : GenuineIntel
arch : IA-64
family : 32
model : 1
model name : Dual-Core Intel(R) Itanium(R) 2 Processor 9150M [...]
processor : 4
vendor : GenuineIntel
arch : IA-64
family : 32
model : 0
model name : Dual-Core Intel(R) Itanium(R) 2 Processor 9040
---

Quoted 2 lines

Those comments hold true for the mainline perfmon (v2.0) and the development perfmon in GIT (v2.7).

Thanks,

Signature · 2 lines
Russ Anderson, OS RAS/Partitioning Project Lead  
SGI - Silicon Graphics Inc          [email protected]
#2 lore raw
In reply to Stephane Eranian
Quoted 5 lines · Russ Anderson
Quoted 4 lines · Stephane Eranian

Hello everyone,

Intel released the Itanium 9100 series (Montvale) a few days ago.

Quoted 8 lines
Quoted 4 lines

My understanding is that the Montvale PMU is fully compatible with the Montecito PMU (dual-core Itanium 9000 series). Thus, there will not be any patches needed neither at the kernel level, nor in libpfm or pfmon to support this new processor.

Perfmon prints out "Montecito PMU" when booted on a Montvale. Updating the message may avoid some confusion.

Yes, because it prints the PMU model not the processor model. On Madison, it prints Itanium 2.

Quoted 32 lines

---
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
---

Both Montvale and Montecito are family 32. Montvale is model 1. Montecito is model 0.

---
saturn1-10:~ # cat /proc/cpuinfo
processor : 0
vendor : GenuineIntel
arch : IA-64
family : 32
model : 1
model name : Dual-Core Intel(R) Itanium(R) 2 Processor 9150M [...]
processor : 4
vendor : GenuineIntel
arch : IA-64
family : 32
model : 0
model name : Dual-Core Intel(R) Itanium(R) 2 Processor 9040
---

Quoted 2 lines

Those comments hold true for the mainline perfmon (v2.0) and the development perfmon in GIT (v2.7).

Thanks,

Signature · 2 lines
Russ Anderson, OS RAS/Partitioning Project Lead  
SGI - Silicon Graphics Inc          [email protected]
Signature · 1 line
-Stephane