pata_isapnp: Polled devices
PATCH 1/1 pata_isapnp: Polled devices
If a card has no IRQ then pass no interrupt handler but allow polled usage.
Signed-off-by Alan Cox <[email protected]>
drivers/ata/pata_isapnp.c +7 -4
@@ -75,13 +75,16 @@struct ata_host *host;struct ata_port *ap;void __iomem *cmd_addr, *ctl_addr; +int irq =0 ; +irq_handler_t handler =NULL ;if (pnp_port_valid (idev,0 ) ==0 )return -ENODEV ; -/* FIXME: Should selected polled PIO here not fail */ -if (pnp_irq_valid (idev,0 ) ==0 ) -return -ENODEV ; +if (pnp_irq_valid (idev,0 )) { + irq =pnp_irq (idev,0 ); + handler = ata_interrupt; + }/* allocate host */ host =ata_host_alloc (&idev->dev,1 );
@@ -115,7 +118,7 @@ (unsigned long long)pnp_port_start(idev, 1));/* activate */ -return ata_host_activate (host,pnp_irq (idev,0 ), ata_interrupt,0 , +return ata_host_activate (host, irq, handler,0 , &isapnp_sht); }
Quoted 9 lines · Alan Cox
If a card has no IRQ then pass no interrupt handler but allow polled usage.
Signed-off-by Alan Cox <[email protected]>diff -u --new-file --recursive --exclude-from
/usr/src/excludelinux.vanilla-2.6.24-rc2-mm1/drivers/ata/pata_isapnp.clinux-2.6.24-rc2-mm1/drivers/ata/pata_isapnp.c
drivers/ata/pata_isapnp.c line 81
Quoted 7 lines
drivers/ata/pata_isapnp.c +2
-0@@ -75,13 +75,16 @@struct ata_host *host;struct ata_port *ap;void __iomem *cmd_addr, *ctl_addr; +int irq =0 ; +irq_handler_t handler =NULL ;if (pnp_port_valid (idev,0 ) ==0 )
applied #upstream-fixes