DSP: Move code to use only one dsp_common.h
Subsystems (5)
Tony Lindgren
maintainerPATCH 1/2 DSP: Move code to use only one dsp_common.h
Hi all,
As discussed earlier, here are the patches to move dspgateway to under drivers.
Hiroshi san & Toshihiro san, can you take a quick look at these two patches and ack?
I've only compile tested on osk and n800. There should not be any functional changes. Some inline functions I had to export though.
Regards,
Tony
Quoted 1 line
From
a4945cb4c9427fd5bcf699607bab1d9cc9f32daeMon Sep 17 00:00:00 2001
From: Tony Lindgren <[email protected]>
Date: Tue, 27 Nov 2007 20:37:53 -0800
Subject: [PATCH] DSP: Move code to use only one dsp_common.h
Remove arch-arm/plat-omap/dsp/dsp_common.h, and move definitions to include/asm-arm/arch-omap/dsp_common.h.
This is done in order to prepare dsp for moving to live under drivers. No functional changes.
--- arch/arm/mach-omap1/board-nokia770.c | 3 +- arch/arm/mach-omap1/mmu.c | 2 + arch/arm/mach-omap1/mmu.h | 3 - arch/arm/mach-omap1/pm.c | 1 - arch/arm/mach-omap2/board-n800-audio.c | 2 +- arch/arm/mach-omap2/board-n800-dsp.c | 3 +- arch/arm/mach-omap2/mmu.h | 3 - arch/arm/plat-omap/devices.c | 3 +- arch/arm/plat-omap/dsp/dsp.h | 144 +++++++++++++++++++- arch/arm/plat-omap/dsp/dsp_common.c | 4 +- arch/arm/plat-omap/dsp/dsp_common.h | 241 -------------------------------- arch/arm/plat-omap/dsp/dsp_core.c | 37 +++++- arch/arm/plat-omap/dsp/uaccess_dsp.h | 3 +- arch/arm/plat-omap/mcbsp.c | 2 +- arch/arm/plat-omap/mmu.c | 1 + include/asm-arm/arch-omap/dsp_common.h | 39 +++++ 16 files changed, 231 insertions(+), 260 deletions(-) delete mode 100644 arch/arm/plat-omap/dsp/dsp_common.h
arch/arm/mach-omap1/board-nokia770.c +1 -2
@@ -36,8 +36,7 @@#include <asm/arch/omapfb.h> #include <asm/arch/hwa742.h> #include <asm/arch/lcd_mipid.h> - -#include "../plat-omap/dsp/dsp_common.h" +#include <asm/arch/dsp_common.h> #define ADS7846_PENDOWN_GPIO 15
arch/arm/mach-omap1/mmu.c +2 -0
@@ -32,6 +32,8 @@#include <linux/err.h> #include "mmu.h" #include <asm/tlbflush.h> +#include <asm/arch/dsp.h> +#include <asm/arch/dsp_common.h> static void *dspvect_page;#define DSP_INIT_PAGE 0xfff000
arch/arm/mach-omap1/mmu.h +0 -3
@@ -118,9 +118,6 @@ static inline void omap_mmu_write_reg(struct omap_mmu *mmu,__raw_writew (val, mmu->base + reg); } -int omap_dsp_request_mem (void ); -void omap_dsp_release_mem (void ); -static inline void omap_mmu_itack (struct omap_mmu *mmu) {omap_mmu_write_reg (mmu,OMAP_MMU_IT_ACK_IT_ACK ,OMAP_MMU_IT_ACK );
arch/arm/mach-omap1/pm.c +0 -1
@@ -57,7 +57,6 @@#include <asm/arch/pm.h> #include <asm/arch/mux.h> #include <asm/arch/dma.h> -#include <asm/arch/dsp_common.h> #include <asm/arch/dmtimer.h> static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE ];
arch/arm/mach-omap2/board-n800-audio.c +1 -1
@@ -29,7 +29,7 @@#include <asm/io.h> #include <asm/arch/eac.h> -#include "../plat-omap/dsp/dsp_common.h" +#include <asm/arch/dsp_common.h> #if defined(CONFIG_SPI_TSC2301_AUDIO ) && defined(CONFIG_SND_OMAP24XX_EAC )#define AUDIO_ENABLED
arch/arm/mach-omap2/board-n800-dsp.c +1 -2
@@ -30,8 +30,7 @@#include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/board.h> - -#include "../plat-omap/dsp/dsp_common.h" +#include <asm/arch/dsp_common.h> #if defined(CONFIG_OMAP_DSP )
arch/arm/mach-omap2/mmu.h +0 -3
@@ -59,9 +59,6 @@#define IOMAP_VAL 0x3f -#define omap_dsp_request_mem () do { } while (0) -#define omap_dsp_release_mem () do { } while (0) -#define INIT_TLB_ENTRY (ent,v,p,ps) \ do { \ (ent)->va = (v); \
arch/arm/plat-omap/devices.c +1 -2
@@ -25,6 +25,7 @@#include <asm/arch/mux.h> #include <asm/arch/gpio.h> #include <asm/arch/menelaus.h> +#include <asm/arch/dsp_common.h> #if defined(CONFIG_ARCH_OMAP24XX ) || defined(CONFIG_ARCH_OMAP34XX )# include "../mach-omap2/control.h"
@@ -32,8 +33,6 @@#if defined(CONFIG_OMAP_DSP ) || defined(CONFIG_OMAP_DSP_MODULE ) -#include "../plat-omap/dsp/dsp_common.h" -static struct dsp_platform_data dsp_pdata = { .kdev_list =LIST_HEAD_INIT (dsp_pdata.kdev_list), };
arch/arm/plat-omap/dsp/dsp.h +143 -1
162 lines not on this page · raw message
arch/arm/plat-omap/dsp/dsp_common.c +3 -1
@@ -33,10 +33,12 @@#include <asm/io.h> #include <asm/tlbflush.h> #include <asm/irq.h> +#include <asm/arch/dsp_common.h> +#include "dsp.h" +#ifdef CONFIG_ARCH_OMAP1 #include <asm/arch/tc.h> #endif -#include "dsp_common.h" #if defined(CONFIG_ARCH_OMAP1 )#define dsp_boot_config (mode) omap_writew((mode), MPUI_DSP_BOOT_CONFIG)
arch/arm/plat-omap/dsp/dsp_common.h deleted +0 -241
241 lines not on this page · raw message
arch/arm/plat-omap/dsp/dsp_core.c +36 -1
@@ -30,11 +30,11 @@#include <linux/clk.h> #include <asm/delay.h> #include <asm/arch/mailbox.h> +#include <asm/arch/dsp.h> #include <asm/arch/dsp_common.h> #include "dsp_mbcmd.h" #include "dsp.h" #include "ipbuf.h" -#include "dsp_common.h" MODULE_AUTHOR ("Toshihiro Kobayashi <[email protected]>" );MODULE_DESCRIPTION ("OMAP DSP driver module" );
@@ -454,6 +454,41 @@ static void mbox_kfunc(struct mbcmd *mb) } } +#if defined(CONFIG_ARCH_OMAP1 ) +static inline void dsp_clk_enable (void ) {} +static inline void dsp_clk_disable (void ) {} +#elif defined(CONFIG_ARCH_OMAP2 ) +static inline void dsp_clk_enable (void ) +{ +u32 r; + +/*XXX should be handled in mach-omap[1,2] XXX*/ +prm_write_mod_reg (OMAP24XX_FORCESTATE | (1 <<OMAP_POWERSTATE_SHIFT ), +OMAP24XX_DSP_MOD ,PM_PWSTCTRL ); + + r =cm_read_mod_reg (OMAP24XX_DSP_MOD ,CM_AUTOIDLE ); + r |=OMAP2420_AUTO_DSP_IPI ; +cm_write_mod_reg (r,OMAP24XX_DSP_MOD ,CM_AUTOIDLE ); + + r =cm_read_mod_reg (OMAP24XX_DSP_MOD ,CM_CLKSTCTRL ); + r |=OMAP24XX_AUTOSTATE_DSP ; +cm_write_mod_reg (r,OMAP24XX_DSP_MOD ,CM_CLKSTCTRL ); + +clk_enable (dsp_fck_handle); +clk_enable (dsp_ick_handle); +__dsp_per_enable (); +} +static inline void dsp_clk_disable (void ) +{ +__dsp_per_disable (); +clk_disable (dsp_ick_handle); +clk_disable (dsp_fck_handle); + +prm_write_mod_reg (OMAP24XX_FORCESTATE | (3 <<OMAP_POWERSTATE_SHIFT ), +OMAP24XX_DSP_MOD ,PM_PWSTCTRL ); +} +#endif +int dsp_late_init (void ) {int ret;
arch/arm/plat-omap/dsp/uaccess_dsp.h +2 -1
@@ -25,7 +25,8 @@#define _OMAP_DSP_UACCESS_DSP_H#include <asm/uaccess.h> -#include "dsp_common.h" +#include <asm/arch/dsp_common.h> +#include "dsp.h" #define HAVE_ASM_COPY_FROM_USER_DSP_2B
arch/arm/plat-omap/mcbsp.c +1 -1
@@ -28,8 +28,8 @@#include <asm/arch/dma.h> #include <asm/arch/mux.h> #include <asm/arch/irqs.h> -#include <asm/arch/dsp_common.h> #include <asm/arch/mcbsp.h> +#include <asm/arch/dsp_common.h> #ifdef CONFIG_MCBSP_DEBUG #define DBG(x...) printk(x)
arch/arm/plat-omap/mmu.c +1 -0
@@ -38,6 +38,7 @@#include <asm/pgtable.h> #include <asm/arch/mmu.h> #include <asm/sizes.h> +#include <asm/arch/dsp_common.h> #if defined(CONFIG_ARCH_OMAP1 )#include "../mach-omap1/mmu.h"
include/asm-arm/arch-omap/dsp_common.h +39 -0
@@ -24,11 +24,50 @@#ifndef ASM_ARCH_DSP_COMMON_H #define ASM_ARCH_DSP_COMMON_H +#include <linux/clk.h> + +struct dsp_kfunc_device { +char *name; +struct clk *fck; + struct clk *ick;; +spinlock_t lock; +int enabled; +int type; +#define DSP_KFUNC_DEV_TYPE_COMMON 1 +#define DSP_KFUNC_DEV_TYPE_AUDIO 2 + +struct list_head entry; + +int (*probe)(struct dsp_kfunc_device *,int ); +int (*remove)(struct dsp_kfunc_device *,int ); +int (*enable)(struct dsp_kfunc_device *,int ); +int (*disable)(struct dsp_kfunc_device *,int ); +}; + +extern int dsp_kfunc_device_register (struct dsp_kfunc_device *); + +struct dsp_platform_data { +struct list_head kdev_list; +}; + +struct omap_dsp { +struct mutex lock; +int enabled;/* stored peripheral status */ +struct omap_mmu *mmu; +struct omap_mbox *mbox; +struct device *dev; +struct list_head *kdev_list; +int initialized; +}; +#ifdef CONFIG_ARCH_OMAP1 extern void omap_dsp_request_mpui (void );extern void omap_dsp_release_mpui (void );extern int omap_dsp_request_mem (void );extern int omap_dsp_release_mem (void ); +#elif defined(CONFIG_ARCH_OMAP2 ) +#define omap_dsp_request_mem () do { } while (0) +#define omap_dsp_release_mem () do { } while (0)#endif #endif /* ASM_ARCH_DSP_COMMON_H */
Signature · 1 line
1.5.3.6.GIT
Tony Lindgren
maintainerRe: [PATCH 2/2] DSP: Move dspgateway to drivers/dsp/dspgateway
This patch does the actual moving of the files.
Tony
Quoted 1 line
From
c43c710df9b75494ce931f8e4b730a7f54d56d05Mon Sep 17 00:00:00 2001
From: Tony Lindgren <[email protected]>
Date: Tue, 27 Nov 2007 21:13:02 -0800
Subject: [PATCH] DSP: Move dspgateway to drivers/dsp/dspgateway
Move dspgateway to drivers/dsp/dspgateway
--- arch/arm/Kconfig | 1 + arch/arm/mach-omap1/mmu.c | 6 + arch/arm/mach-omap1/mmu.h | 7 - arch/arm/mach-omap2/mmu.h | 6 +- arch/arm/plat-omap/Kconfig | 2 - arch/arm/plat-omap/Makefile | 3 - arch/arm/plat-omap/dsp/Kconfig | 24 - arch/arm/plat-omap/dsp/Makefile | 15 - arch/arm/plat-omap/dsp/dsp.h | 391 ----- arch/arm/plat-omap/dsp/dsp_common.c | 627 ------- arch/arm/plat-omap/dsp/dsp_core.c | 663 ------- arch/arm/plat-omap/dsp/dsp_ctl.c | 1069 ------------ arch/arm/plat-omap/dsp/dsp_ctl_core.c | 132 -- arch/arm/plat-omap/dsp/dsp_mbcmd.h | 147 -- arch/arm/plat-omap/dsp/dsp_mem.c | 482 ------ arch/arm/plat-omap/dsp/error.c | 227 --- arch/arm/plat-omap/dsp/hardware_dsp.h | 34 - arch/arm/plat-omap/dsp/ipbuf.c | 353 ---- arch/arm/plat-omap/dsp/ipbuf.h | 193 --- arch/arm/plat-omap/dsp/mblog.c | 280 --- arch/arm/plat-omap/dsp/mmu.h | 140 -- arch/arm/plat-omap/dsp/omap1_dsp.h | 114 -- arch/arm/plat-omap/dsp/omap2_dsp.h | 95 - arch/arm/plat-omap/dsp/proclist.h | 87 - arch/arm/plat-omap/dsp/task.c | 3042 --------------------------------- arch/arm/plat-omap/dsp/taskwatch.c | 163 -- arch/arm/plat-omap/dsp/uaccess_dsp.S | 77 - arch/arm/plat-omap/dsp/uaccess_dsp.h | 176 -- drivers/Makefile | 1 + drivers/dsp/dspgateway/Kconfig | 24 + drivers/dsp/dspgateway/Makefile | 15 + drivers/dsp/dspgateway/dsp.h | 391 +++++ drivers/dsp/dspgateway/dsp_common.c | 627 +++++++ drivers/dsp/dspgateway/dsp_core.c | 663 +++++++ drivers/dsp/dspgateway/dsp_ctl.c | 1069 ++++++++++++ drivers/dsp/dspgateway/dsp_ctl_core.c | 132 ++ drivers/dsp/dspgateway/dsp_mbcmd.h | 147 ++ drivers/dsp/dspgateway/dsp_mem.c | 484 ++++++ drivers/dsp/dspgateway/error.c | 227 +++ drivers/dsp/dspgateway/hardware_dsp.h | 34 + drivers/dsp/dspgateway/ipbuf.c | 353 ++++ drivers/dsp/dspgateway/ipbuf.h | 193 +++ drivers/dsp/dspgateway/mblog.c | 280 +++ drivers/dsp/dspgateway/mmu.h | 140 ++ drivers/dsp/dspgateway/omap1_dsp.h | 114 ++ drivers/dsp/dspgateway/omap2_dsp.h | 95 + drivers/dsp/dspgateway/proclist.h | 87 + drivers/dsp/dspgateway/task.c | 3042 +++++++++++++++++++++++++++++++++ drivers/dsp/dspgateway/taskwatch.c | 163 ++ drivers/dsp/dspgateway/uaccess_dsp.S | 77 + drivers/dsp/dspgateway/uaccess_dsp.h | 176 ++ include/asm-arm/arch-omap/mmu.h | 10 + 52 files changed, 8552 insertions(+), 8548 deletions(-) delete mode 100644 arch/arm/plat-omap/dsp/Kconfig delete mode 100644 arch/arm/plat-omap/dsp/Makefile delete mode 100644 arch/arm/plat-omap/dsp/dsp.h delete mode 100644 arch/arm/plat-omap/dsp/dsp_common.c delete mode 100644 arch/arm/plat-omap/dsp/dsp_core.c delete mode 100644 arch/arm/plat-omap/dsp/dsp_ctl.c delete mode 100644 arch/arm/plat-omap/dsp/dsp_ctl_core.c delete mode 100644 arch/arm/plat-omap/dsp/dsp_mbcmd.h delete mode 100644 arch/arm/plat-omap/dsp/dsp_mem.c delete mode 100644 arch/arm/plat-omap/dsp/error.c delete mode 100644 arch/arm/plat-omap/dsp/hardware_dsp.h delete mode 100644 arch/arm/plat-omap/dsp/ipbuf.c delete mode 100644 arch/arm/plat-omap/dsp/ipbuf.h delete mode 100644 arch/arm/plat-omap/dsp/mblog.c delete mode 100644 arch/arm/plat-omap/dsp/mmu.h delete mode 100644 arch/arm/plat-omap/dsp/omap1_dsp.h delete mode 100644 arch/arm/plat-omap/dsp/omap2_dsp.h delete mode 100644 arch/arm/plat-omap/dsp/proclist.h delete mode 100644 arch/arm/plat-omap/dsp/task.c delete mode 100644 arch/arm/plat-omap/dsp/taskwatch.c delete mode 100644 arch/arm/plat-omap/dsp/uaccess_dsp.S delete mode 100644 arch/arm/plat-omap/dsp/uaccess_dsp.h create mode 100644 drivers/dsp/dspgateway/Kconfig create mode 100644 drivers/dsp/dspgateway/Makefile create mode 100644 drivers/dsp/dspgateway/dsp.h create mode 100644 drivers/dsp/dspgateway/dsp_common.c create mode 100644 drivers/dsp/dspgateway/dsp_core.c create mode 100644 drivers/dsp/dspgateway/dsp_ctl.c create mode 100644 drivers/dsp/dspgateway/dsp_ctl_core.c create mode 100644 drivers/dsp/dspgateway/dsp_mbcmd.h create mode 100644 drivers/dsp/dspgateway/dsp_mem.c create mode 100644 drivers/dsp/dspgateway/error.c create mode 100644 drivers/dsp/dspgateway/hardware_dsp.h create mode 100644 drivers/dsp/dspgateway/ipbuf.c create mode 100644 drivers/dsp/dspgateway/ipbuf.h create mode 100644 drivers/dsp/dspgateway/mblog.c create mode 100644 drivers/dsp/dspgateway/mmu.h create mode 100644 drivers/dsp/dspgateway/omap1_dsp.h create mode 100644 drivers/dsp/dspgateway/omap2_dsp.h create mode 100644 drivers/dsp/dspgateway/proclist.h create mode 100644 drivers/dsp/dspgateway/task.c create mode 100644 drivers/dsp/dspgateway/taskwatch.c create mode 100644 drivers/dsp/dspgateway/uaccess_dsp.S create mode 100644 drivers/dsp/dspgateway/uaccess_dsp.h
arch/arm/Kconfig +1 -0
@@ -1081,6 +1081,7 @@ source "drivers/dma/Kconfig" if ARCH_OMAP source "drivers/cbus/Kconfig" +source "drivers/dsp/dspgateway/Kconfig" endif endmenu
arch/arm/mach-omap1/mmu.c +6 -0
@@ -81,6 +81,12 @@ void dsp_mem_usecount_clear(void) }EXPORT_SYMBOL_GPL (dsp_mem_usecount_clear); +void omap_mmu_itack (struct omap_mmu *mmu) +{ +omap_mmu_write_reg (mmu,OMAP_MMU_IT_ACK_IT_ACK ,OMAP_MMU_IT_ACK ); +} +EXPORT_SYMBOL (omap_mmu_itack); +static int omap1_mmu_mem_enable (struct omap_mmu *mmu,void *addr) {int ret =0 ;
arch/arm/mach-omap1/mmu.h +0 -7
@@ -95,8 +95,6 @@ do { \ (ent)->ap =OMAP_MMU_RAM_L_AP_FA ; \ }while (0 ) -extern struct omap_mmu_ops omap1_mmu_ops; - struct omap_mmu_tlb_entry {unsigned long va;unsigned long pa;
@@ -118,9 +116,4 @@ static inline void omap_mmu_write_reg(struct omap_mmu *mmu, __raw_writew(val, mmu->base + reg); } -static inline void omap_mmu_itack (struct omap_mmu *mmu) -{ -omap_mmu_write_reg (mmu,OMAP_MMU_IT_ACK_IT_ACK ,OMAP_MMU_IT_ACK ); -} -#endif /* __MACH_OMAP1_MMU_H */
arch/arm/mach-omap2/mmu.h +1 -5
@@ -93,8 +93,6 @@ do { \ (ent)->mixed =0 ; \ }while (0 ) -extern struct omap_mmu_ops omap2_mmu_ops; - struct omap_mmu_tlb_entry {unsigned long va;unsigned long pa;
@@ -115,7 +113,5 @@ static inline void omap_mmu_write_reg(struct omap_mmu *mmu, {__raw_writel (val, mmu->base + reg); } -static inline void omap_mmu_itack (struct omap_mmu *mmu) -{ -} +#endif /* __MACH_OMAP2_MMU_H */
arch/arm/plat-omap/Kconfig +0 -2
@@ -211,8 +211,6 @@ config OMAP_SERIAL_WAKE to data on the serial RX line. This allows you to wake the system from serial console. -source "arch/arm/plat-omap/dsp/Kconfig" - endmenu endif
arch/arm/plat-omap/Makefile +0 -3
@@ -32,6 +32,3 @@ obj-$(CONFIG_OMAP_MMU_FWK) += mmu.o # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o -# DSP subsystem -obj-y += dsp/ -obj-$(CONFIG_OMAP_DSP) += mailbox.o
arch/arm/plat-omap/dsp/Kconfig deleted +0 -24
@@ -1,24 +0,0 @@ - -config OMAP_DSP - tristate "OMAP DSP driver (DSP Gateway)" - depends on ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP24XX - select OMAP_MMU_FWK - select OMAP_MBOX_FWK - help - This enables OMAP DSP driver, DSP Gateway. - -config OMAP_DSP_MBCMD_VERBOSE - bool "Mailbox Command Verbose LOG" - depends on OMAP_DSP - help - This enables kernel log output in the Mailbox command exchanges - in the DSP Gateway driver. - -config OMAP_DSP_FBEXPORT - bool "Framebuffer export to DSP" - depends on OMAP_DSP && FB - help - This enables to map the frame buffer to DSP. - By doing this, DSP can access the frame buffer directly without - bothering ARM. -
arch/arm/plat-omap/dsp/Makefile deleted +0 -15
@@ -1,15 +0,0 @@ -# -# Makefile for the OMAP DSP driver. -# - -# The target object and module list name. - -obj-y := dsp_common.o - -obj-$(CONFIG_OMAP_DSP) += dsp.o - -# Declare multi-part drivers - -dsp-objs := dsp_core.o ipbuf.o mblog.o task.o \ - dsp_ctl_core.o dsp_ctl.o taskwatch.o error.o dsp_mem.o \ - uaccess_dsp.o
arch/arm/plat-omap/dsp/dsp.h deleted +0 -391
391 lines not on this page · raw message
arch/arm/plat-omap/dsp/dsp_common.c deleted +0 -627
627 lines not on this page · raw message
arch/arm/plat-omap/dsp/dsp_core.c deleted +0 -663
663 lines not on this page · raw message
arch/arm/plat-omap/dsp/dsp_ctl.c deleted +0 -1069
1,069 lines not on this page · raw message
arch/arm/plat-omap/dsp/dsp_ctl_core.c deleted +0 -132
132 lines not on this page · raw message
arch/arm/plat-omap/dsp/dsp_mbcmd.h deleted +0 -147
13 lines not on this page · raw message
arch/arm/plat-omap/dsp/dsp_mem.c deleted +0 -482
482 lines not on this page · raw message
arch/arm/plat-omap/dsp/error.c deleted +0 -227
227 lines not on this page · raw message
arch/arm/plat-omap/dsp/hardware_dsp.h deleted +0 -34
Lines of this file are not shown. View the raw message.
arch/arm/plat-omap/dsp/ipbuf.c deleted +0 -353
353 lines not on this page · raw message
arch/arm/plat-omap/dsp/ipbuf.h deleted +0 -193
193 lines not on this page · raw message
arch/arm/plat-omap/dsp/mblog.c deleted +0 -280
280 lines not on this page · raw message
arch/arm/plat-omap/dsp/mmu.h deleted +0 -140
140 lines not on this page · raw message
arch/arm/plat-omap/dsp/omap1_dsp.h deleted +0 -114
114 lines not on this page · raw message
arch/arm/plat-omap/dsp/omap2_dsp.h deleted +0 -95
95 lines not on this page · raw message
arch/arm/plat-omap/dsp/proclist.h deleted +0 -87
87 lines not on this page · raw message
arch/arm/plat-omap/dsp/task.c deleted +0 -3042
3,042 lines not on this page · raw message
arch/arm/plat-omap/dsp/taskwatch.c deleted +0 -163
163 lines not on this page · raw message
arch/arm/plat-omap/dsp/uaccess_dsp.S deleted +0 -77
77 lines not on this page · raw message
arch/arm/plat-omap/dsp/uaccess_dsp.h deleted +0 -176
176 lines not on this page · raw message
drivers/dsp/dspgateway/Kconfig new file +24 -0
Lines of this file are not shown. View the raw message.
drivers/dsp/dspgateway/Makefile new file +15 -0
Lines of this file are not shown. View the raw message.
drivers/dsp/dspgateway/dsp.h new file +391 -0
391 lines not on this page · raw message
drivers/dsp/dspgateway/dsp_common.c new file +627 -0
627 lines not on this page · raw message
drivers/dsp/dspgateway/dsp_core.c new file +663 -0
663 lines not on this page · raw message
drivers/dsp/dspgateway/dsp_ctl.c new file +1069 -0
1,069 lines not on this page · raw message
drivers/dsp/dspgateway/dsp_ctl_core.c new file +132 -0
132 lines not on this page · raw message
drivers/dsp/dspgateway/dsp_mbcmd.h new file +147 -0
147 lines not on this page · raw message
drivers/dsp/dspgateway/dsp_mem.c new file +484 -0
484 lines not on this page · raw message
drivers/dsp/dspgateway/error.c new file +227 -0
227 lines not on this page · raw message
drivers/dsp/dspgateway/hardware_dsp.h new file +34 -0
Lines of this file are not shown. View the raw message.
drivers/dsp/dspgateway/ipbuf.c new file +353 -0
353 lines not on this page · raw message
drivers/dsp/dspgateway/ipbuf.h new file +193 -0
193 lines not on this page · raw message
drivers/dsp/dspgateway/mblog.c new file +280 -0
280 lines not on this page · raw message
drivers/dsp/dspgateway/mmu.h new file +140 -0
140 lines not on this page · raw message
drivers/dsp/dspgateway/omap1_dsp.h new file +114 -0
114 lines not on this page · raw message
drivers/dsp/dspgateway/omap2_dsp.h new file +95 -0
95 lines not on this page · raw message
drivers/dsp/dspgateway/proclist.h new file +87 -0
87 lines not on this page · raw message
drivers/dsp/dspgateway/task.c new file +3042 -0
3,042 lines not on this page · raw message
drivers/dsp/dspgateway/taskwatch.c new file +163 -0
163 lines not on this page · raw message
drivers/dsp/dspgateway/uaccess_dsp.S new file +77 -0
77 lines not on this page · raw message
drivers/dsp/dspgateway/uaccess_dsp.h new file +176 -0
176 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.5.3.6.GIT
Part of the diff is not shown here. View the raw message.
Hi Tony,
From: "ext Tony Lindgren" <[email protected]>
Subject: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
Date: Tue, 27 Nov 2007 21:18:12 -0800
Quoted 10 lines
Hi all,
As discussed earlier, here are the patches to move dspgateway to under drivers.
Hiroshi san & Toshihiro san, can you take a quick look at these two patches and ack?
I've only compile tested on osk and n800. There should not be any functional changes. Some inline functions I had to export though.
Thank you for the patch, but it doesn't seem to work. I am now investigating....
At least, I'd like to make sure that the code itself works fine at this migration both on N8x0 and OSK.
Hiroshi DOYU
Tony Lindgren
maintainerQuoted 11 lines · Hiroshi DOYU
Hi Tony,
From: "ext Tony Lindgren" <[email protected]>
Subject: [PATCH 1/2] DSP: Move code to use only onedsp_common.h
Date: Tue, 27 Nov 2007 21:18:12 -0800Quoted 5 lines
Hi all,
As discussed earlier, here are the patches to move dspgateway to under drivers.
Quoted 8 lines
Quoted 5 lines
Hiroshi san & Toshihiro san, can you take a quick look at these two patches and ack?
I've only compile tested on osk and n800. There should not be any functional changes. Some inline functions I had to export though.
Thank you for the patch, but it doesn't seem to work. I am now investigating....
Oops, does the DSP get initialized?
Quoted 2 lines
At least, I'd like to make sure that the code itself works fine at this migration both on N8x0 and OSK.
Yes that would be great :)
Tony
Tony Lindgren
maintainerQuoted 21 lines · Tony Lindgren
Quoted 11 lines · Hiroshi DOYU
Hi Tony,
From: "ext Tony Lindgren" <[email protected]>
Subject: [PATCH 1/2] DSP: Move code to use only onedsp_common.h
Date: Tue, 27 Nov 2007 21:18:12 -0800Quoted 5 lines
Hi all,
As discussed earlier, here are the patches to move dspgateway to under drivers.
Quoted 8 lines
Quoted 5 lines
Hiroshi san & Toshihiro san, can you take a quick look at these two patches and ack?
I've only compile tested on osk and n800. There should not be any functional changes. Some inline functions I had to export though.
Thank you for the patch, but it doesn't seem to work. I am now investigating....
Quoted 6 lines
Oops, does the DSP get initialized?
Quoted 2 lines
At least, I'd like to make sure that the code itself works fine at this migration both on N8x0 and OSK.
Yes that would be great :)
No idea why it would not work, but here's one more clean-up patch in order to send the MMU framework upstream.
Tony
Quoted 1 line
From
870324f3b330e7df6e5391b1c379c029b6c9f5f3Mon Sep 17 00:00:00 2001
From: Tony Lindgren <[email protected]>
Date: Wed, 28 Nov 2007 15:33:49 -0800
Subject: [PATCH] DSP: Clean up memory allocation return values
Clean up memory allocation return values
arch/arm/mach-omap1/mmu.c +0 -1
@@ -32,7 +32,6 @@#include <linux/err.h> #include "mmu.h" #include <asm/tlbflush.h> -#include <asm/arch/dsp.h> #include <asm/arch/dsp_common.h> static void *dspvect_page;
arch/arm/plat-omap/mcbsp.c +9 -2
@@ -28,8 +28,8 @@#include <asm/arch/dma.h> #include <asm/arch/mux.h> #include <asm/arch/irqs.h> -#include <asm/arch/mcbsp.h> #include <asm/arch/dsp_common.h> +#include <asm/arch/mcbsp.h> #ifdef CONFIG_MCBSP_DEBUG #define DBG(x...) printk(x)
@@ -197,7 +197,14 @@ static int omap_mcbsp_check(unsigned int id)static void omap_mcbsp_dsp_request (void ) {if (cpu_is_omap15xx () ||cpu_is_omap16xx ()) { -omap_dsp_request_mem (); +int ret; + + ret =omap_dsp_request_mem (); +if (ret <0 ) { +printk (KERN_ERR "Could not get dsp memory: %i\n" , ret); +return ; + } +clk_enable (mcbsp_dsp_ck);clk_enable (mcbsp_api_ck);
arch/arm/plat-omap/mmu.c +28 -9
@@ -588,9 +588,12 @@ int omap_mmu_load_tlb_entry(struct omap_mmu *mmu, {struct omap_mmu_tlb_lock lock;struct cam_ram_regset *cr; +int ret;clk_enable (mmu->clk); -omap_dsp_request_mem (); + ret =omap_dsp_request_mem (); +if (ret <0 ) + goto out;omap_mmu_get_tlb_lock (mmu, &lock);for (lock.victim =0 ; lock.victim < lock.base; lock.victim++) {
@@ -624,6 +627,7 @@ found_victim:omap_mmu_set_tlb_lock (mmu, &lock);omap_dsp_release_mem (); +out:clk_disable (mmu->clk);return 0 ; }
@@ -638,11 +642,13 @@ omap_mmu_cam_va(struct omap_mmu *mmu, struct cam_ram_regset *cr)int omap_mmu_clear_tlb_entry (struct omap_mmu *mmu,unsigned long vadr) {struct omap_mmu_tlb_lock lock; -int i; +int i, ret =0 ;int max_valid =0 ;clk_enable (mmu->clk); -omap_dsp_request_mem (); + ret =omap_dsp_request_mem (); +if (ret <0 ) + goto out;omap_mmu_get_tlb_lock (mmu, &lock);for (i =0 ; i < lock.base; i++) {
@@ -666,23 +672,28 @@ int omap_mmu_clear_tlb_entry(struct omap_mmu *mmu, unsigned long vadr)omap_mmu_set_tlb_lock (mmu, &lock);omap_dsp_release_mem (); +out:clk_disable (mmu->clk); -return 0 ; +return ret; }EXPORT_SYMBOL_GPL (omap_mmu_clear_tlb_entry);static void omap_mmu_gflush (struct omap_mmu *mmu) {struct omap_mmu_tlb_lock lock; +int ret;clk_enable (mmu->clk); -omap_dsp_request_mem (); + ret =omap_dsp_request_mem (); +if (ret <0 ) + goto out;omap_mmu_write_reg (mmu,0x1 ,OMAP_MMU_GFLUSH ); lock.base = lock.victim = mmu->nr_exmap_preserved;omap_mmu_set_tlb_lock (mmu, &lock);omap_dsp_release_mem (); +out:clk_disable (mmu->clk); }
@@ -1073,7 +1084,10 @@ static int omap_mmu_init(struct omap_mmu *mmu)int ret =0 ;clk_enable (mmu->clk); -omap_dsp_request_mem (); + ret =omap_dsp_request_mem (); +if (ret <0 ) + goto out; +down_write (&mmu->exmap_sem); ret = request_irq(mmu->irq, omap_mmu_interrupt, IRQF_DISABLED,
@@ -1093,9 +1107,10 @@ static int omap_mmu_init(struct omap_mmu *mmu)if (unlikely (mmu->ops->startup)) ret = mmu->ops->startup (mmu); - fail: +fail:up_write (&mmu->exmap_sem);omap_dsp_release_mem (); +out:clk_disable (mmu->clk);return ret;
@@ -1309,15 +1324,18 @@ static ssize_t omap_mmu_show(struct device *dev, struct device_attribute *attr, {struct omap_mmu *mmu =dev_get_drvdata (dev);struct omap_mmu_tlb_lock tlb_lock; -int ret = -EIO ; +int ret;clk_enable (mmu->clk); -omap_dsp_request_mem (); + ret =omap_dsp_request_mem (); +if (ret <0 ) + goto out;down_read (&mmu->exmap_sem);omap_mmu_get_tlb_lock (mmu, &tlb_lock); + ret = -EIO ;if (likely (mmu->ops->show)) ret = mmu->ops->show (mmu, buf, &tlb_lock);
@@ -1326,6 +1344,7 @@ static ssize_t omap_mmu_show(struct device *dev, struct device_attribute *attr,up_read (&mmu->exmap_sem);omap_dsp_release_mem (); +out:clk_disable (mmu->clk);return ret;
include/asm-arm/arch-omap/dsp_common.h +5 -2
@@ -66,8 +66,11 @@ extern void omap_dsp_release_mpui(void);extern int omap_dsp_request_mem (void );extern int omap_dsp_release_mem (void );#elif defined(CONFIG_ARCH_OMAP2 ) -#define omap_dsp_request_mem () do { } while (0) -#define omap_dsp_release_mem () do { } while (0) +static inline int omap_dsp_request_mem (void ) +{ +return 0 ; +} +#define omap_dsp_release_mem () do {} while (0)#endif #endif /* ASM_ARCH_DSP_COMMON_H */
Hi Tony,
From: "ext Tony Lindgren" <[email protected]>
Subject: Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
Date: Wed, 28 Nov 2007 15:35:24 -0800
Quoted 24 lines · Tony Lindgren
Quoted 23 lines · Hiroshi DOYU
Quoted 11 lines
Hi Tony,
From: "ext Tony Lindgren" <[email protected]>
Subject: [PATCH 1/2] DSP: Move code to use only onedsp_common.h
Date: Tue, 27 Nov 2007 21:18:12 -0800Quoted 5 lines
Hi all,
As discussed earlier, here are the patches to move dspgateway to under drivers.
Quoted 8 lines
Quoted 5 lines
Hiroshi san & Toshihiro san, can you take a quick look at these two patches and ack?
I've only compile tested on osk and n800. There should not be any functional changes. Some inline functions I had to export though.
Thank you for the patch, but it doesn't seem to work. I am now investigating....
Oops, does the DSP get initialized?
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
At least, I'd like to make sure that the code itself works fine at this migration both on N8x0 and OSK.
Yes that would be great :)
No idea why it would not work, but here's one more clean-up patch in order to send the MMU framework upstream.
With OSK5912, I verified that the demo program("demo_console") worked fine with your 3 patches. Probably something was broken just with OMAP2. I am checking it bit more.
Hiroshi DOYU
Tony Lindgren
maintainerQuoted 33 lines · Hiroshi DOYU
Hi Tony,
From: "ext Tony Lindgren" <[email protected]>
Subject: Re: [PATCH 1/2] DSP: Move code to use only onedsp_common.h
Date: Wed, 28 Nov 2007 15:35:24 -0800Quoted 27 lines · Tony Lindgren
Quoted 26 lines · Hiroshi DOYU
Quoted 11 lines
Hi Tony,
From: "ext Tony Lindgren" <[email protected]>
Subject: [PATCH 1/2] DSP: Move code to use only onedsp_common.h
Date: Tue, 27 Nov 2007 21:18:12 -0800Quoted 5 lines
Hi all,
As discussed earlier, here are the patches to move dspgateway to under drivers.
Quoted 8 lines
Quoted 5 lines
Hiroshi san & Toshihiro san, can you take a quick look at these two patches and ack?
I've only compile tested on osk and n800. There should not be any functional changes. Some inline functions I had to export though.
Thank you for the patch, but it doesn't seem to work. I am now investigating....
Oops, does the DSP get initialized?
Quoted 2 lines
At least, I'd like to make sure that the code itself works fine at this migration both on N8x0 and OSK.
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Yes that would be great :)
No idea why it would not work, but here's one more clean-up patch in order to send the MMU framework upstream.
With OSK5912, I verified that the demo
program("demo_console")worked fine with your 3 patches. Probably something was broken just with OMAP2. I am checking it bit more.
OK, that's good to hear. Let's wait until you're happy before pushing this.
Tony
Tony Lindgren
maintainerHi,
Quoted 39 lines · Tony Lindgren
Quoted 38 lines · Hiroshi DOYU
Hi Tony,
From: "ext Tony Lindgren" <[email protected]>
Subject: Re: [PATCH 1/2] DSP: Move code to use only onedsp_common.h
Date: Wed, 28 Nov 2007 15:35:24 -0800Quoted 31 lines · Tony Lindgren
Quoted 21 lines · Hiroshi DOYU
Quoted 11 lines
Hi Tony,
From: "ext Tony Lindgren" <[email protected]>
Subject: [PATCH 1/2] DSP: Move code to use only onedsp_common.h
Date: Tue, 27 Nov 2007 21:18:12 -0800Quoted 5 lines
Hi all,
As discussed earlier, here are the patches to move dspgateway to under drivers.
Quoted 8 lines
Quoted 5 lines
Hiroshi san & Toshihiro san, can you take a quick look at these two patches and ack?
I've only compile tested on osk and n800. There should not be any functional changes. Some inline functions I had to export though.
Thank you for the patch, but it doesn't seem to work. I am now investigating....
Quoted 6 lines
Oops, does the DSP get initialized?
Quoted 2 lines
At least, I'd like to make sure that the code itself works fine at this migration both on N8x0 and OSK.
Yes that would be great :)
No idea why it would not work, but here's one more clean-up patch in order to send the MMU framework upstream.
Quoted 6 lines
Quoted 3 lines
With OSK5912, I verified that the demo
program("demo_console")worked fine with your 3 patches. Probably something was broken just with OMAP2. I am checking it bit more.OK, that's good to hear. Let's wait until you're happy before pushing this.
I've pushed these patches, Hiroshi is looking into why omap2 dsp is not currently working while omap1 is. It seems the problem is unrelated to these patches.
Regards,
Tony
From: "ext Tony Lindgren" <[email protected]>
Subject: Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
Date: Fri, 30 Nov 2007 12:02:22 -0800
Quoted 10 lines
Quoted 6 lines
Quoted 3 lines
With OSK5912, I verified that the demo
program("demo_console")worked fine with your 3 patches. Probably something was broken just with OMAP2. I am checking it bit more.OK, that's good to hear. Let's wait until you're happy before pushing this.
I've pushed these patches, Hiroshi is looking into why omap2 dsp is not currently working while omap1 is. It seems the problem is unrelated to these patches.
Actually dspgw itself is basically working with omap2 also. Probably there seems to be some missing update patches from N8x0 for other drivers, which are supposed to come soon.
Anyway, thank you for you patches.
Hiroshi DOYU
Hi,
Quoted 15 lines · Hiroshi DOYU
From: "ext Tony Lindgren" <[email protected]>
Subject: Re: [PATCH 1/2] DSP: Move code to use only onedsp_common.h
Date: Fri, 30 Nov 2007 12:02:22 -0800Quoted 10 lines
Quoted 6 lines
Quoted 3 lines
With OSK5912, I verified that the demo
program("demo_console")worked fine with your 3 patches. Probably something was broken just with OMAP2. I am checking it bit more.OK, that's good to hear. Let's wait until you're happy before pushing this.
I've pushed these patches, Hiroshi is looking into why omap2 dsp is not currently working while omap1 is. It seems the problem is unrelated to these patches.
Quoted 8 lines
Actually dspgw itself is basically working with omap2 also. Probably there seems to be some missing update patches from N8x0 for other drivers, which are supposed to come soon.
Anyway, thank you for you patches.
Hiroshi DOYU
Is there any plan to move dspgw code to use "dspfs" instead?
-- --Trilok Soni
Hi Trilok,
From: "ext Trilok Soni" <[email protected]>
Subject: Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
Date: Mon, 3 Dec 2007 16:03:25 +0530
Quoted 22 lines
Hi,
Quoted 19 lines · Hiroshi DOYU
From: "ext Tony Lindgren" <[email protected]>
Subject: Re: [PATCH 1/2] DSP: Move code to use only onedsp_common.h
Date: Fri, 30 Nov 2007 12:02:22 -0800Quoted 10 lines
Quoted 6 lines
Quoted 3 lines
With OSK5912, I verified that the demo
program("demo_console")worked fine with your 3 patches. Probably something was broken just with OMAP2. I am checking it bit more.OK, that's good to hear. Let's wait until you're happy before pushing this.
I've pushed these patches, Hiroshi is looking into why omap2 dsp is not currently working while omap1 is. It seems the problem is unrelated to these patches.
Actually dspgw itself is basically working with omap2 also. Probably there seems to be some missing update patches from N8x0 for other drivers, which are supposed to come soon.
Quoted 6 lines
Quoted 4 lines
Anyway, thank you for you patches.
Hiroshi DOYU
Is there any plan to move dspgw code to use "dspfs" instead?
No, we don't have any plan, unfortunately.
Hiroshi DOYU