remove HT1000 from the quirk_msi_ht_cap quirk

Andrew, due to mailer problems, I'm not sure you received my previous mail
titled: "[PATCH] V2 - quirk: Enable MSI Mapping on HT1000" if you did, then forget it and use this one instead. Or if you already merged V2 then drop this one.

Sorry for the inconvenience.

Sebastien.

From: Sebastien Dugue <[email protected]>

Now that the HyperTransport MSI mapping capability is enabled for Broadcom's
HT1000 bridge, the quirk_msi_ht_cap quirk is no longer necessary.

---
 drivers/pci/quirks.c |    4 ----
 1 file changed, 4 deletions(-)

Index: linux-2.6.24-rc3-mm2/drivers/pci/quirks.c
===================================================================
@@ -1711,10 +1711,6 @@ static void __devinit quirk_msi_ht_cap(s
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
 			quirk_msi_ht_cap);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS,
-			PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
-			quirk_msi_ht_cap);
-
 
 /*
  *  Force enable MSI mapping capability on HT bridges