2.6.24-rc4-mm1

Temporarily at

http://userweb.kernel.org/~akpm/2.6.24-rc4-mm1/

Will appear later at

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc4/2.6.24-rc4-mm1/

- Lots of device IDs have been removed from the e1000 driver and moved over to e1000e. So if your e1000 stops working, you forgot to set CONFIG_E1000E.

- The s390 build is still broken.

Boilerplate:

- See the `hot-fixes' directory for any important updates to this patchset.

- To fetch an -mm tree using git, use (for example)

git-fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git tag v2.6.16-rc2-mm1 git-checkout -b local-v2.6.16-rc2-mm1 v2.6.16-rc2-mm1

- -mm kernel commit activity can be reviewed by subscribing to the mm-commits mailing list.

echo "subscribe mm-commits" | mail [email protected]

- If you hit a bug in -mm and it is not obvious which patch caused it, it is most valuable if you can perform a bisection search to identify which patch introduced the bug. Instructions for this process are at

http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt

But beware that this process takes some time (around ten rebuilds and reboots), so consider reporting the bug first and if we cannot immediately identify the faulty patch, then perform the bisection search.

- When reporting bugs, please try to Cc: the relevant maintainer and mailing list on any email.

- When reporting bugs in this kernel via email, please also rewrite the email Subject: in some manner to reflect the nature of the bug. Some developers filter by Subject: when looking for messages to read.

- Occasional snapshots of the -mm lineup are uploaded to ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/ and are announced on the mm-commits list. These probably are at least compilable.

- More-than-daily -mm snapshots may be found at
http://userweb.kernel.org/~akpm/mmotm/. These are almost certainly not compileable.

Changes since 2.6.24-rc3-mm2:

origin.patch
git-acpi.patch
git-alsa.patch
git-agpgart.patch
git-arm.patch
git-avr32.patch
git-avr32-fixup.patch
git-cpufreq.patch
git-powerpc.patch
git-powerpc-galak.patch
git-drm.patch
git-dvb.patch
git-hwmon.patch
git-gfs2-nmw.patch
git-hid.patch
git-hrt.patch
git-ieee1394.patch
git-infiniband.patch
git-input.patch
git-jfs.patch
git-kbuild.patch
git-kvm.patch
git-lblnet.patch
git-leds.patch
git-libata-all.patch
git-md-accel.patch
git-mips.patch
git-mmc.patch
git-mtd.patch
git-ubi.patch
git-net.patch
git-netdev-all.patch
git-battery.patch
git-nfsd.patch
git-ocfs2.patch
git-parisc.patch
git-selinux.patch
git-s390.patch
git-sched.patch
git-sh.patch
git-scsi-misc.patch
git-sparc64.patch
git-unionfs.patch
git-v9fs.patch
git-watchdog.patch
git-wireless.patch
git-ipwireless_cs.patch
git-x86.patch
git-newsetup.patch
git-xfs.patch
git-cryptodev.patch
git-xtensa.patch

git trees

-update-checkpatchpl-to-version-012.patch -file-capabilities-allow-sigcont-within-session-v2.patch -cris-build-fixes-atomich-needs-compilerh.patch -atmel_spi-labels-gpios-better.patch -ps3-prefix-all-ps3-specific-kernel-modules-with.patch -ps3fb-video-memory-size-cleanups.patch -fix-boot-problem-with-iseries-lacking-hugepage-support.patch -uml-build-fix.patch
-xen-mask-_page_pcd-from-ptes.patch -pnp-increase-the-maximum-number-of-resources.patch -pnp-increase-the-maximum-number-of-resources-fix.patch -proc-fix-null-i_fop-oops.patch -wait_task_stopped-dont-use-task_pid_nr_ns-lockless.patch -proc-remove-races-from-proc_id_readdir.patch -tpm-tis-device-driver-locality-request.patch -termios-document-callback-more-clearly.patch -s3c24xx-ensure-we-only-configure-valid-gpios.patch -s3c2410-add-bus-number-to-spi-gpio-driver.patch -ipc-lost-unlock-and-fput-in-mqueuec-on-error-path.patch -fix-linux-kdh-usage-in-userspace.patch -fix-linux-kdh-usage-in-userspace-checkpatch-fixes.patch -m68k-zorro7xx-needs-asm-amigahwh.patch -fb_ddc-fix-ddc-lines-quirk.patch -drivers-pnp-resourcec-add-missing-pci_dev_put.patch -mfd-sm501-debug-typo-fix.patch -isolate-the-uts-namespaces-domainname-and-hostname-back.patch -the-namespaces-compatibility-list.patch -atmel_lcdfb-lcdc-startup-fix.patch -dmaengine-correct-invalid-assumptions-in-the-kconfig-text.patch -ip22zilog-fix-lockup-and-sysrq.patch -fix-up-ext2_fsh-for-userspace-after-reservations-backport.patch -hexdump-dont-print-bytes-with-bit-7-set.patch -file-capabilities-dont-prevent-signaling-setuid-root.patch -isdn-bootup-crash-fix-2624-rc3-git1.patch -uml-fix-no_hz-busy-loop.patch
-leak-in-do_ubd_request.patch -revert-keyspan-init-termios-properly.patch -x86_64-efi-boot-support-efi-frame-buffer.patch -x86_64-efi-boot-support-efi-boot-document.patch -memory-hotplug-fix-fix-section-mismatch-in-vmammap_allock_block.patch -memory-hotplug-x86_64-fix-section-mismatch-in-init_memory_mapping.patch -fuse-fix-reading-past-eof.patch -fuse-cleanup-add-fuse_get_attr_version.patch -fuse-pass-open-flags-to-read-and-write.patch -fuse-fix-fuse_file_ops-sending.patch -fuse-fix-uninitialized-field-in-fuse_inode.patch -fuse-fix-attribute-caching-after-rename.patch -sound-core-memallocc-add-missing-pci_dev_put.patch -arm-fix-memset-size-error.patch -gregkh-driver-allow-legacy_ptys-to-be-set-to-0.patch -gregkh-driver-create-sys-power-when-config_pm-is-set.patch -gregkh-driver-uio-fix-up-the-uio-documentation.patch -gregkh-driver-uio-add-uio-documentation-target-to-docbook-makefile.patch -gregkh-driver-kobject-two-typo-fixes.patch -gregkh-driver-sysfs-fix-off-by-one-error-in-fill_read_buffer.patch -gregkh-driver-nozomi.patch
-git-drm-warning-fix.patch -clocksource-make-clocksource_mask-bullet-proof.patch -time-fold-__get_realtime_clock_ts-into-getnstimeofday.patch -clean-hungarian-notation-from-timers.patch
-timer-cleanups.patch
-more-timer-related-cleanups.patch -ata_generic-unindent-loop-in-generic_set_mode.patch -libata-export-xfermode--pata-timing-related-functions.patch -libata-clean-up-xfermode--pata-timing-related-stuff.patch -libata-kill-ata_id_to_dma_mode.patch -libata-separate-out-ata_acpi_gtm_xfermask-from-pacpi_discover_modes.patch -libata-fix-ata_acpi_gtm_xfermask.patch -libata-implement-ata_timing_cycle2mode-and-use-it-in-libata-acpi-and-pata_acpi.patch -libata-implement-ata_acpi_init_gtm.patch -libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch -libata-add-ata_cbl_pata_ign.patch -pata_amd-update-mode-selection-for-nv-patas.patch -sata_nv-dont-use-legacy-dma-in-adma-mode-v3.patch -ide-mm-alim15x3-add-mitac-8317-and-derivatives-to-ali_cable_override.patch -ide-mm-ide-fix-host-drivers-depending-on-ide_generic-to-probe-for-interfaces.patch -fix-config_mtd_sharp_sl-if-config_mtd=m-try2.patch -net-irda-parametersc-trivial-fixes.patch -net-fix-tx-bug-vlan-in-vlan.patch
-xfrm_policy-warning-fix.patch
-phy-implement-release-function.patch -git-nfsd-fix-nfsd_idmap-stubs.patch -arch-parisc-remove-duplicate-includes.patch -gregkh-pci-pci-pcie-portdriver-initialize-returned-value.patch -gregkh-pci-pci-drivers-pci-pci-sysfsc-add-missing-pci_dev_put.patch -gregkh-usb-usb-fix-usb_ohci_hcd_ssb-dependencies.patch -gregkh-usb-usb-omap_udc-build-fix.patch -gregkh-usb-usb-pl2303-add-support-for-corega-cg-usbrs232r.patch -gregkh-usb-usb-storage-always-set-the-allow_restart-flag.patch -gregkh-usb-usb-fix-priority-mistakes-in-drivers-usb-core-hubc.patch -gregkh-usb-usb-free-memory-when-writing-fails-in-usb-serial-mos7840c.patch -gregkh-usb-usb-fix-usbled-disconnect-read-race-2.patch -gregkh-usb-usbserial-fix-inconsistent-lock-state.patch -gregkh-usb-usb-fix-signr-comment-in-usbdevice_fsh.patch -gregkh-usb-usb-power-management-documenation-update.patch -gregkh-usb-usb-fix-locks-and-urb-status-in-adutux.patch -gregkh-usb-usb-add-support-for-an-older-firmware-revision-for-the-nikon-d200.patch -gregkh-usb-usb-fix-directory-references-in-usb-readme.patch -gregkh-usb-usb-remove-usb-hub-entry-from-maintainers.patch -gregkh-usb-usb-mailing-lists-have-changed.patch -gregkh-usb-usb-hcd-avoid-duplicate-local_irq_disable.patch -gregkh-usb-usb-sierra-new-product-id.patch -gregkh-usb-usb-keep-track-of-whether-interface-sysfs-files-exist.patch -gregkh-usb-usb-uevent-environment-key-fix.patch -gregkh-usb-usb-make-the-microtek-driver-and-hal-cooperate.patch -gregkh-usb-usb-fix-up-ehci-startup-synchronization.patch -gregkh-usb-usb-usb-storage-unusual_devs-entry-for-jetflash-ts1gjf2a.patch -gregkh-usb-usb-s3c2410-gadget-header-move-fixups.patch -gregkh-usb-usb-s3c2410-gadget-allow-sharing-of-vbus-irq.patch -gregkh-usb-usb-s3c2410-gadget-ensure-vbus-pin-in-input-mode-during-read.patch -watchdog-add-nano-7240-driver-2.patch -txx9-watchdog-support-for-rbhma3100rbhma4200rbhma4500.patch -x86_64-set-cpu_index-to-nr_cpus-instead-of-0.patch -x86_64-do-not-set-boot-cpu-in-cpu_online_map-at-x86_64_start_kernel.patch -vmlinux_32ldss-remove-repeated-comment-from-the-x86-32-linker-script.patch -x86_64-make-sparsemem-vmemmap-the-only-memory-model.patch -rtc-convert-mutex-to-bitfield.patch
-drm-i915-fix-pointer-strip.patch -pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch -frv-fix-the-extern-declaration-of-kallsyms_num_syms.patch -frv-arrange-things-such-that-bra-can-reach-from-the-trap.patch -wait_task_stopped-pass-correct-exit_code-to.patch -tty-add-the-new-termios2-ioctls-to-the-compatible.patch -acpi-avoid-references-to-impossible-processors.patch -fix-proc-net-breakage.patch -lguest-prevent-visws-or-voyager-randconfigs.patch -x86-paravirt-revert-exports-to-restore-old-behaviour.patch -optimize-i8259-code-a-bit.patch -mm-prevent-dereferencing-non-allocated-per_cpu-variables.patch -mm-prevent-dereferencing-non-allocated-per_cpu-variables-fix.patch -fall-back-on-interrupt-disable-in-cmpxchg8b-on-80386-and-80486.patch -kernel-modulec-make_driver_name-can-use-kasrpintf.patch -lockdep-show-held-locks-when-showing-a-stackdump.patch -kmap_atomic-debugging.patch

Merged into mainline or a subsystem tree

+aio-only-account-i-o-wait-time-in-read_events-if-there-are-active-requests.patch +fix-cloneclone_newpid.patch +rtc-assure-proper-memory-ordering-with-respect-to-rtc_dev_busy-flag.patch +ufs-fix-nexstep-dir-block-size.patch +ufs-fix-nexstep-dir-block-size-checkpatch-fixes.patch +aoe-properly-initialise-the-request_queues-backing_dev_info.patch +mm-backing-devc-fix-percpu_counter_destroy-call-bug-in-bdi_init.patch +add-export_symbolksize.patch
+spi-use-mutex-not-semaphore.patch +spi-at25-driver-is-for-eeprom-not-flash.patch +spi-simplify-spi_sync-calling-convention.patch +spi-use-simplified-spi_sync-calling-convention.patch +spi-initial-bf54x-spi-support.patch +spi-bfin-spi-uses-portmux-calls.patch +spi-spi_bfin-cleanups-error-handling.patch +spi-spi_bfin-handles-spi_transfercs_change.patch +spi-spi_bfin-dont-bypass-spi-framework.patch +spi-spi_bfin-uses-platform-device-resources.patch +spi-spi_bfin-uses-portmux-for-additional-busses.patch +spi-spi_bfin-rearrange-portmux-calls.patch +spi-spi_bfin-change-handling-of-communication-parameters.patch +spi-spi_bfin-relocate-spin-waits.patch +spi-spi_bfin-handle-multiple-spi_masters.patch +spi-spi_bfin-bugfix-for-816-bit-word-sizes.patch +spi-spi_bfin-update-handling-of-delay-after-deselect.patch +spi-spi_bfin-resequence-dma-start-stop.patch +blackfin-spi-driver-use-cpu_relax-to-replace-continue-in-while-busywait.patch +blackfin-spi-driver-use-void-__iomem-for-regs_base.patch +blackfin-spi-driver-move-hard-coded-pin_req-to-board-file.patch +blackfin-spi-driver-reconfigure-speed_hz-and-bits_per_word-in-each-spi-transfer.patch +avoid-potential-null-dereference-in-unregister_sysctl_table.patch +gpio_cs5535-disable-aux-on-output.patch
+mm-fix-xip-file-writes.patch +revert-dpt_i2o-convert-to-scsi-hotplug-model.patch

2.6.24 queue

+__group_complete_signal-fix-coredump-with-group-stop-race.patch +remove-handle_group_stop-in-favor-of-do_signal_stop.patch +exec-rework-the-group-exit-and-fix-the-race-with-kill.patch

Maybe 2.6.24

+timerfd-v3-new-timerfd-api-ia64-fix.patch +timerfd-v3-new-timerfd-api-m68k-fix.patch +timerfd-v3-new-timerfd-api-mips-fix.patch +timerfd-v3-new-timerfd-api-arch-fixes.patch +timerfd-v3-new-timerfd-api-powerpc-fix.patch +timerfd-v3-new-timerfd-api-update-sys_nic-with-the-new-timerfd-syscalls.patch

Maybe fix timerfd-v3-new-timerfd-api.patch just a bit.

+sdio-fix-module-device-table-definition-for-m68k.patch +jbd-fix-assertion-failure-in-fs-jbd-checkpointc.patch +proc-fix-pde-refcounting.patch

Maybe 2.6.24

+git-avr32-fixup.patch

Fix conflicts in git-avr32.patch

+powerpc-invalid-size-for-swapper_pg_dir-with-config_pte_64bit=y.patch

powerpc fix

+gregkh-driver-nozomi.patch +gregkh-driver-kobject-convert-hvc_console-to-use-kref-not-kobject.patch +gregkh-driver-kobject-convert-hvcs-to-use-kref-not-kobject.patch +gregkh-driver-kobject-grab-the-kset-reference-in-kobject_add-not-kobject_init.patch +gregkh-driver-kobject-clean-up-debugging-messages.patch +gregkh-driver-usb-use-proper-call-to-driver_create_file.patch +gregkh-driver-pcmcia-use-proper-call-to-driver_create_file.patch +gregkh-driver-pci-use-proper-call-to-driver_create_file.patch +gregkh-driver-pci-remove-foolish-code-from-pci-driverc.patch +gregkh-driver-driver-core-move-the-driver-specific-module-code-into-the-driver-core.patch +gregkh-driver-driver-core-move-the-static-kobject-out-of-struct-driver.patch +gregkh-driver-driver-core-clean-up-debugging-messages.patch +gregkh-driver-kobject-fix-up-kobject_set_name-to-use-kvasprintf.patch +gregkh-driver-kobject-add-kobject_init_ng-kobject_add_ng-and-kobject_init_and_add-functions.patch +gregkh-driver-driver-core-fix-class-glue-dir-cleanup-logic.patch +gregkh-driver-sysfs-fix-sys-module-holders-after-sysfs-logic-change.patch +gregkh-driver-kobject-drop-child-parent-ref-at-unregistration.patch +gregkh-driver-block-device.patch

driver tree updates

+driver-tree-broke-infiniband.patch +gregkh-driver-driver-core-move-the-driver-specific-module-code-into-the-driver-core-fix.patch

Fixes for driver tree

+jdelvare-i2c-i2c-remove-redundant-gpio-drivers.patch

i2c tree update

+applesmc-sensors-set-for-macbook2.patch

sensors driver update

+apanel-free-input-device-on-close.patch
+apanel-change-name-of-led.patch
+apanel-detach-on-shutdown.patch
+apanel-use-generic-keycode-routines.patch

Update fujitsu-application-panel-driver.patch

+ads7846-stop-updating-dev-powerpower_state.patch

input driver fix

+libata-xfer_mask-is-unsigned-int-not-unsigned-long-fix.patch +libata-set-proper-ata-udma-mode-for-bf548-according-to-system-clock-checkpatch-fixes.patch +ata-ahci-enclosure-management-via-led.patch +libata-fix-early-use-of-port-printk-checkpatch-fixes.patch

sata/pata things

+ide-mm-ide-scsi-add-ide_scsi_hex_dump-helper.patch +ide-mm-ide-add-missing-checks-for-control-register-existence.patch +ide-mm-ide-deprecate-config_blk_dev_offboard.patch +ide-mm-ide-fix-ide_scan_pcibus-error-message.patch +ide-mm-ide-coding-style-fixes-for-drivers-ide-setup-pci-c.patch +ide-mm-ide-add-sys-bus-ide-devices-model-firmware-serial-sysfs-entries.patch +ide-mm-ide-fix-host-drivers-depending-on-ide_generic-to-probe-for-interfaces-take-2.patch +ide-mm-au1xxx-ide-au_ide_probe-fix.patch +ide-mm-au1xxx-ide-use-ide_init_port_hw.patch +ide-mm-ide-always-use-ide_std_init_ports-in-setup-pci-c.patch +ide-mm-ide-use-ide_init_port_hw-in-setup-pci-c.patch +ide-mm-rapide-remove-write-only-hwif-hwif_data.patch +ide-mm-ide-pmac-use-custom-hwif-sg_max_nents-only-if-dma-support-is-enabled.patch +ide-mm-ide-add-ide_set_irq-inline-helper.patch +ide-mm-ide-print-banner-message-once-per-controller-in-m68k-host-drivers.patch +ide-mm-ide-move-config_idepci_pcibus_order-code-to-ide-scan-pci-c.patch +ide-mm-ide-make-config_idepci_pcibus_order-visible-and-deprecate-it.patch

IDE tree updates

-git-mips-fixup.patch

Unneeded

+remove-trailing-nuls-from-network-bonding-sysfs-interface.patch +net-bonding-return-nothing-for-not-applicable-values.patch +net-bonding-purely-cosmetic-rename-a-local-variable.patch

net things

+net-smc911x-shut-up-compiler-warnings.patch
+bnx2x-depends-on-zlib_inflate.patch

netdev things

+pcmcia-stop-updating-dev-powerpower_state.patch

pcmcia fix

+quirk-enable-msi-mapping-on-ht1000-v2.patch

Fix quirk-enable-msi-mapping-on-ht1000.patch

-git-sh-fixup.patch

Unneeded

+drivers-scsi-sgiwd93c-export-sgiwd93_reset.patch
+scsi-qla2xxx-qla_osc-section-fix.patch

scsi fixes

-bidi-support-scsi_data_buffer-broke-qla1280.patch -bidi-support-scsi_data_buffer-broke-lots-of-stuff.patch

Folded into bidi-support-scsi_data_buffer.patch

+scsi-pending-arm-convert-to-accessors.patch

scsi fix

+edgeport-usb-serial-converter-convert-es_sem-to-mutex.patch +usb-testing-driver-convert-dev-sem-to-mutex.patch +usb-testing-driver-dont-free-a-locked-mutex.patch

USB things

+git-watchdog-hpwdt-build-fix.patch
+add-support-for-sb1-hardware-watchdog.patch
+add-support-for-sb1-hardware-watchdog-fix.patch

watchdog things

+iwlwifi-3945-fix-race-conditional-panic.patch +iwlwifi-4965-fix-race-conditional-panic.patch +net-mac80211-fix-inappropriate-memory-freeing.patch +bcm43xx_debugfs-sscanf-fix.patch

wireless fixes

+revert-git-kvm-changes-in-arch-x86-kconfig.patch
git-x86.patch
+revert-revert-git-kvm-changes-in-arch-x86-kconfig.patch

Make git-x86 apply

-git-x86-build-fix.patch

Unneeded

+git-x86-__vdso_getcpu-warning-fix.patch +uml-add-asm-um-asmh.patch +clocksource-make-clocksource_mask-bullet-proof.patch +time-fold-__get_realtime_clock_ts-into-getnstimeofday.patch

x86 stuff

+git-cryptodev-fixup.patch

Fix conflicts in git-cryptodev

+ieee80211_rate-missed-unlock.patch
+slubs-ksize-fails-for-size-2048.patch
+vm-security-add-security-hook-to-do_brk.patch

More 2.6.24 things

+vmstat-remove-prefetch.patch +mm-sparsec-improve-the-error-handling-for-sparse_add_one_section.patch +mm-dont-waste-swap-on-locked-pages.patch +skip-writing-data-pages-when-inode-is-under-i_sync.patch

MM updates

+add-64-bit-capability-support-to-the-kernel-capabilities-export-__cap_-symbols.patch +capabilities-introduce-per-process-capability-bounding-set-capabilities-correct-logic-at-capset_check.patch

Fix 64-bit capabilities

+smack-using-capabilities-32-and-33-update-cap_last_cap-to-reflect-cap_mac_admin.patch +smack-mutex-capability-pointers-and-spelling-cleanup.patch

smack updates

+nommu-add-new-vmalloc_user-and-remap_vmalloc_range-interfaces.patch

nommu update

+uml-fix-command-line-cflags-and-ldflags-support.patch +uml-style-fixes-in-arch-um-os-linux.patch

UML updates

+printk-trivial-optimizations-fix.patch

Fix printk-trivial-optimizations.patch

-partitions-use-kasprintf.patch

Dropped due to rejects

+inotify-send-in_attrib-events-when-link-count-changes-fix.patch +reiserfs-complement-va_start-with-va_end.patch +get-rid-of-nr_open-and-introduce-a-sysctl_nr_open.patch +synclink-standardize-format-of-linux-header-file-includes-with.patch +kernel-add-mutex_lock_killable.patch +vfs-use-mutex_lock_killable-in-vfs_readdir.patch +fix-__const_udelay-declaration-and-definition-mismatches.patch +drivers-char-randomcwrite_pool-cond_resched-needed.patch +kill-an-unused-ptr_err-in-bdev_cache_init.patch +remove-rcu_assign_pointer-penalty-for-null-pointers.patch +remove-superfluous-checks-for-config_blk_dev_initrd-from-initramfsc.patch +serial-use-sgi_has_zilog-for-ip22_zilog-depends.patch +char-use-sgi_has_ds1286-for-sgi_ds1286-depends.patch +clean-up-drivers-char-rtcc.patch +sc26xx-new-serial-driver-for-sc2681-uarts.patch +sc26xx-new-serial-driver-for-sc2681-uarts-update.patch +inotify-fix-race.patch
+inotify-remove-debug-code.patch +documentation-about-unaligned-memory-access.patch +drivers-char-tty_ioc-remove-pty_sem.patch +drivers-isdn-i4l-isdn_ttyc-remove-write_sem.patch +unix98-allocated_ptys_lock-semaphore-to-mutex.patch +kallsyms-should-prefer-non-weak-symbols.patch +kallsyms-should-prefer-non-weak-symbols-checkpatch-fixes.patch

Misc

+move-kprobes-examples-to-samples-resend-vs-git-x86.patch

Fix move-kprobes-examples-to-samples-resend.patch

+gigaset-permit-module-unload.patch

gigaset fix

+rtc-cmos-alarm-acts-as-oneshot.patch
+platform-real-time-clock-driver-for-dallas-1511-chip.patch
+# +blackfin-rtc-driver-the-frequency-function-is-in-units-of-hz-not-units-of-seconds-so-lock-our-driver-down-to-1-hz.patch +blackfin-rtc-driver-we-pass-in-a-struct-device-to-the-irq-handler-not-a-struct-platform_device-so-fix-the-irq-handler.patch +blackfin-rtc-driver-cleanup-proc-handler-we-dont-need-rtc-reg-dump-now-that-we-have-mmr-filesystem-in-sysfs.patch +blackfin-rtc-driver-use-dev_dbg-rather-than-pr_stamp.patch +blackfin-rtc-driver-read_alarm-checks-the-enabled-field-not-the-pending-field.patch +blackfin-rtc-driver-shave-off-another-memcpy-by-using-assignment.patch +blackfin-rtc-driver-convert-sync-wait-to-use-the-irq-write-complete-notice.patch

rtc updates

+fbmon-remove-unnecessary-local-variable.patch +fbmon-cleanup-trailing-whitespaces.patch +fbmon-cleanup-trailing-whitespaces-checkpatch-fixes.patch

fbdev queue

+declare-pnp-option-parsing-functions-as-__init.patch +declare-pnp-option-parsing-functions-as-__init-checkpatch-fixes.patch +isapnp-driver-semaphore-to-mutex.patch +isapnp-driver-semaphore-to-mutex-fix.patch +isapnp-driver-semaphore-to-mutex-fix-fix.patch

pnp updates

-ext4-add-block-bitmap-validation-fix.patch

Folded into ext4-add-block-bitmap-validation.patch

-ext4-fix-up-ext4fs_debug-builds-checkpatch-fixes.patch

Folded into ext4-fix-up-ext4fs_debug-builds.patch

+jbd2-fix-assertion-failure-in-fs-jbd2-checkpointc.patch +ext4-check-for-the-correct-error-return-from-ext4_ext_get_blocks.patch +ext4-check-for-the-correct-error-return-from-ext4_ext_get_blocks-fix.patch

ext4 updates

+memory-controller-improve-user-interface-memory-controller-enhancements-for-reclaiming-take2-possible-race-fix-in-res_counter.patch +per-zone-and-reclaim-enhancements-for-memory-controller-take-3-per-zone-active-inactive-counter-memory-controller-enhancements-for-reclaiming-take2-clean-up-remove-unused-variable.patch +per-zone-and-reclaim-enhancements-for-memory-controller-take-3-per-zone-active-inactive-counter-memory-controller-enhancements-for-reclaiming-take2-add-bug_on-in-mem_cgroup_zoneinfo.patch +per-zone-and-reclaim-enhancements-for-memory-controller-take-3-per-zone-lru-for-cgroup-bugfix-for-memory-cgroup-per-zone-struct-allocation.patch +per-zone-and-reclaim-enhancements-for-memory-controller-take-3-per-zone-lru-for-cgroup-memory-controller-enhancements-for-reclaiming-take2-define-free_mem_cgroup_per_zone_info.patch

Update cgroups memory controller patches in -mm.

-add-cmpxchg_local-to-sh-use-generic-cmpxchg-instead-of-cmpxchg_u32.patch

Dropped due to rejects

+proc-seqfile-convert-proc_pid_status-to-properly-handle-pid-namespaces.patch +proc-seqfile-convert-proc_pid_status-to-properly-handle-pid-namespaces-checkpatch-fixes.patch +proc-seqfile-convert-proc_pid_status-to-properly-handle-pid-namespaces-fix.patch

procfs work

+fix-setsid-for-sub-namespace-sbin-init.patch +teach-set_special_pids-to-use-struct-pid.patch +move-daemonized-kernel-threads-into-the-swappers-session.patch +start-the-global-sbin-init-with-00-special-pids.patch +clocksource-remove-redundant-code.patch +clockevent-simplify-list-operations.patch +timekeeping-rename-timekeeping_is_continuous-to-timekeeping_valid_for_hres.patch +time-fix-typo-in-comments.patch +time-delete-comments-that-refer-to-noexistent-symbols.patch

Core kernel updates

+aout-move-stack_top-to-asm-processorh.patch
+aout-mark-arches-that-support-aout-format.patch +aout-suppress-aout-library-support-if-config_arch_supports_aout.patch +aout-suppress-aout-library-support-if-config_arch_supports_aout-vs-git-x86.patch +aout-suppress-aout-library-support-if-config_arch_supports_aout-vs-sanitize-the-type-of-struct-useru_ar0.patch +aout-remove-unnecessary-inclusions-of-asm-linux-aouth.patch +aout-remove-unnecessary-inclusions-of-asm-linux-aouth-alpha-fix.patch +usb-net2280-cant-have-a-function-called-show_registers.patch +mn10300-allocate-serial-port-uart-ids-for-on-chip-serial-ports.patch +mn10300-add-the-mn10300-am33-architecture-to-the-kernel.patch +mn10300-add-the-mn10300-am33-architecture-to-the-kernel-fix.patch +mn10300-add-platform-mtd-support-for-the-asb2303-board.patch

mn10300 architecture and associated stuff

+rewrite-rd.patch
+rewrite-rd-fix.patch
+rewrite-rd-fixes.patch

Reimplamantation of the ramdisk driver

+linux-kernel-markers-support-multiple-probes.patch +linux-kernel-markers-support-multiple-probes-update.patch +linux-kernel-markers-create-modpost-file.patch

markers update

+cramfs-make-cramfs-little-endian-only.patch +cramfs-make-cramfs-little-endian-only-update.patch +cramfs-make-cramfs-little-endian-only-fix.patch +cramfs-update-documentation.patch

cramfs work (needs updating)

+reiser4-new-export-ops-update.patch
+reiser4-specify-splice-file-operations.patch

reiser5 updates

4453 commits in 1478 patch files

All patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc4/2.6.24-rc4-mm1/patch-list

powerpc allyesconfig fails on the following two drivers (iseries_defconfig fails for the veth one):

drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_add':
drivers/net/ehea/ehea_main.c:2812: error: 'struct device_driver' has no member named 'kobj' drivers/net/ehea/ehea_main.c:2815: error: 'struct device_driver' has no member named 'kobj' drivers/net/ehea/ehea_main.c:2818: error: 'struct device_driver' has no member named 'kobj' drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_remove':
drivers/net/ehea/ehea_main.c:2830: error: 'struct device_driver' has no member named 'kobj' drivers/net/iseries_veth.c: In function 'veth_module_init':
drivers/net/iseries_veth.c:1714: error: 'struct device_driver' has no member named 'kobj'

I'm guessing it's some of Greg's kobj/driver patches that missed to change this, but it's not obvious to me how it should be fixed.

-Olof

Hi,

Probably this patch should fix the build failure (The kobject related structure have been moved to driver_private struct).

--

@@ -2809,7 +2809,7 @@ static int ehea_driver_sysfs_add(struct 
 {
 	int ret;
 
-	ret = sysfs_create_link(&driver->kobj, &dev->kobj,
+	ret = sysfs_create_link(&driver->driver_private->kobj, &dev->kobj,
 				kobject_name(&dev->kobj));
 	if (ret == 0) {
 		ret = sysfs_create_link(&dev->kobj, &driver->kobj,

Hi Andrew,

The 2.6.24-rc4-mm1 kernel build fails with build failure,

CC drivers/char/hvcs.o
drivers/char/hvcs.c: In function ‘hvcs_open’:
drivers/char/hvcs.c:1180: error: wrong type argument to unary exclamation mark make[2]: *** [drivers/char/hvcs.o] Error 1
make[1]: *** [drivers/char] Error 2
make: *** [drivers] Error 2

The kref_get begin void return type, check for the kobject return type as in the previous kobject_get()

        if (!kref_get(&hvcsd->kref)) {
                spin_unlock_irqrestore(&hvcsd->lock, flags); 
                printk(KERN_ERR "HVCS: Kobject of open"
                        " hvcs doesn't exist.\n");
                return -EFAULT; /* Is this the right return value? */
        }

I have tested for the build failure only.

--

@@ -1177,12 +1177,8 @@ fast_open:
 	hvcsd = tty->driver_data;
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
-	if (!kref_get(&hvcsd->kref)) {
-		spin_unlock_irqrestore(&hvcsd->lock, flags);
-		printk(KERN_ERR "HVCS: Kobject of open"
-			" hvcs doesn't exist.\n");
-		return -EFAULT; /* Is this the right return value? */
-	}
+	kref_get(&hvcsd->kref);
+	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
 	hvcsd->open_count++;
 

Oops, sorry about that, my fault. I'll merge your fix in with my original patch, thanks for it.

greg k-h

Yes, but as driver_private is not known by any driver, I don't think this patch will work at all.

Apologies for not looking into the problem earlier. See
http://marc.info/?t=119628022300005&r=1&w=2
"2.6.24-rc3-mm2: Result: hostbyte=0x01 driverbyte=0x00\nend_request: I/O error" for previous installment.

I've bisected it to the following patch in git-scsi-misc branch. Revert on top of 2.6.24-rc4-mm1 also helps.

commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0

Author: Hannes Reinecke <[email protected]>
Date:   Tue Nov 6 09:23:40 2007 +0100

[SCSI] Do not requeue requests if REQ_FAILFAST is set

Any requests with the REQ_FAILFAST flag set should not be requeued to the requeust queue, but rather terminated directly. Otherwise the multipath failover will stall until the command timeout triggers.

index 0f44bdb..0da0dd0 100644
@@ -1286,6 +1286,11 @@ int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
 			 */
 			if (!(req->cmd_flags & REQ_PREEMPT))
 				ret = BLKPREP_DEFER;
+			/*
+			 * Return failfast requests immediately
+			 */
+			if (req->cmd_flags & REQ_FAILFAST)
+				ret = BLKPREP_KILL;
 			break;
 		default:
 			/*

@@ -1414,6 +1419,17 @@ static inline int scsi_host_queue_ready(struct request_queue *q,
 	return 1;
 }
 
+static void __scsi_kill_request(struct request *req)
+{
+	struct scsi_cmnd *cmd = req->special;
+	struct scsi_device *sdev = cmd->device;
+
+	cmd->result = DID_NO_CONNECT << 16;
+	atomic_inc(&cmd->device->iorequest_cnt);
+	sdev->device_busy--;
+	__scsi_done(cmd);
+}
+
 /*
  * Kill a request for a dead device
  */

@@ -1527,8 +1543,16 @@ static void scsi_request_fn(struct request_queue *q)
 		 * accept it.
 		 */
 		req = elv_next_request(q);
-		if (!req || !scsi_dev_queue_ready(q, sdev))
+		if (!req)
+			break;
+
+		if (!scsi_dev_queue_ready(q, sdev)) {
+			if (req->cmd_flags & REQ_FAILFAST) {
+				scsi_kill_request(req, q);
+				continue;
+			}
 			break;
+		}
 
 		if (unlikely(!scsi_device_online(sdev))) {
 			sdev_printk(KERN_ERR, sdev,

@@ -1609,8 +1633,12 @@ static void scsi_request_fn(struct request_queue *q)
 	 * later time.
 	 */
 	spin_lock_irq(q->queue_lock);
-	blk_requeue_request(q, req);
-	sdev->device_busy--;
+	if (unlikely(req->cmd_flags & REQ_FAILFAST))
+		__scsi_kill_request(req);
+	else {
+		blk_requeue_request(q, req);
+		sdev->device_busy--;
+	}
 	if(sdev->device_busy == 0)
 		blk_plug_device(q);
  out:

Hi Andrew,

The 2.6.24-rc4-mm1 kernel build fails on s390x,

CC arch/s390/kernel/traps.o
In file included from include/asm/thread_info.h:39,

                 from include/linux/thread_info.h:21,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:49,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:8,
                 from include/linux/timex.h:57,
                 from include/linux/sched.h:53,
                 from arch/s390/kernel/traps.c:17:

include/asm/processor.h:191: warning: "struct seq_file" declared inside parameter list include/asm/processor.h:191: warning: its scope is only this definition or declaration, which is probably not what you want arch/s390/kernel/traps.c: In function `task_show_regs':
arch/s390/kernel/traps.c:226: error: implicit declaration of function `seq_printf'
make[1]: *** [arch/s390/kernel/traps.o] Error 1
make: *** [arch/s390/kernel] Error 2

Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

This non fatal oops which I have just noticed may be related to this change then - certainly looks networking related.

WARNING: at net/ipv4/tcp_input.c:2518 tcp_fastretrans_alert()

Pid: 0, comm: swapper Not tainted 2.6.24-rc4-mm1 #1

Call Trace:
 <IRQ>  [<ffffffff8046e038>] tcp_fastretrans_alert+0x229/0xe63
 [<ffffffff80470975>] tcp_ack+0xa3f/0x127d
 [<ffffffff804747b7>] tcp_rcv_established+0x55f/0x7f8
 [<ffffffff8047b1aa>] tcp_v4_do_rcv+0xdb/0x3a7
 [<ffffffff881148a8>] :nf_conntrack:nf_ct_deliver_cached_events+0x75/0x99
 [<ffffffff88120179>] :nf_conntrack_ipv4:ipv4_confirm+0x29/0x51
 [<ffffffff8047db71>] tcp_v4_rcv+0x9be/0xaed
 [<ffffffff80455eaa>] nf_hook_slow+0x60/0xdf
 [<ffffffff8045db6b>] ip_local_deliver_finish+0xd3/0x253
 [<ffffffff8045e146>] ip_local_deliver+0x3b/0x85
 [<ffffffff8045d7f9>] ip_rcv_finish+0x119/0x3b8
 [<ffffffff8045e030>] ip_rcv+0x231/0x30c
 [<ffffffff8043ef39>] netif_receive_skb+0x215/0x299
 [<ffffffff880b82b9>] :e1000e:e1000_receive_skb+0x4d/0x1db
 [<ffffffff880bc200>] :e1000e:e1000_clean_rx_irq+0x12c/0x341
 [<ffffffff880ba31a>] :e1000e:e1000_clean+0x306/0x58f
 [<ffffffff8022a16a>] rebalance_domains+0xec/0x423
 [<ffffffff80261332>] handle_edge_irq+0x97/0x13b
 [<ffffffff804412d3>] net_rx_action+0xb8/0x11d
 [<ffffffff802344f8>] __do_softirq+0x71/0xdd
 [<ffffffff8020c8fc>] call_softirq+0x1c/0x30
 [<ffffffff8020e7a5>] do_softirq+0x3d/0x8d
 [<ffffffff80234485>] irq_exit+0x84/0x86
 [<ffffffff8020e89e>] do_IRQ+0x7e/0xe4
 [<ffffffff8020a908>] mwait_idle+0x0/0x58
 [<ffffffff8020a7f1>] default_idle+0x0/0x43
 [<ffffffff8020bc81>] ret_from_intr+0x0/0xa
 <EOI>  [<ffffffff8020a950>] mwait_idle+0x48/0x58
 [<ffffffff80209f23>] enter_idle+0x22/0x24
 [<ffffffff8020a897>] cpu_idle+0x63/0x88
 [<ffffffff804ada75>] rest_init+0x55/0x60
 [<ffffffff80627b9a>] start_kernel+0x2a4/0x32a
 [<ffffffff8062710b>] _sinittext+0x10b/0x120

tornado home #

I have posted a full dmesg up as well as my .config and an lcpci at http://www.reub.net/files/kernel/2.6.24-rc4-mm1/ .

Thanks,
Reuben

From: Reuben Farrelly <[email protected]>
Date: Thu, 06 Dec 2007 17:59:37 +1100

No, it's from TCP assertions and changes added by Ilpo to the net-2.6.25 tree recently.

thanks.

@@ -24,6 +24,7 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/seq_file.h>
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/kdebug.h>

diff -puN include/asm-s390/processor.h~proc-seqfile-convert-proc_pid_status-to-properly-handle-pid-namespaces-fix-2 include/asm-s390/processor.h
@@ -165,6 +165,7 @@ struct stack_frame {
 /* Forward declaration, a strange C thing */
 struct task_struct;
 struct mm_struct;
+struct seq_file;
 
 /* Free all resources held by a thread. */
 extern void release_thread(struct task_struct *);

_

Unfortunately the current greg-versus-git-s390 snafu means that I'm not cross-building s390.

yep, but it isn't e1000. It's core TCP.

Ilpo, Reuben's kernel is talking to you ;)

Something in here broke LVM support - an initrd that has worked fine for quite some time suddenly couldn't mount /dev/VolGroup00/root so we get the infamous "Kernel panic - not syncing: Attempted to kill init!" when we fall off the end of the initrd and haven't pivoted to the real disk.

It finds the disk OK:

[   81.202310] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   81.214466] sd 0:0:0:0: [sda] Write Protect is off
[   81.226467] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   81.238436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   81.250780]  sda: sda1 sda2
[   75.396119] sd 0:0:0:0: [sda] Attached SCSI disk

but then the lvm command says it can't find the volume group VolGroup00 (which is actually sda2 - sda1 is a small /boot partition, rest of disk is LVM).

A quick look at the rc4-mm1 announcement doesn't have any obviously tempting patch names to start at, so it looks like it's time to play mm-bisect. It may take me a day or two, as I have some time management issues this week...

OK, thanks.

First step would be to eliminate rewrite-rd.patch: maybe the ramdisk driver in which that initrd resides is bust.

After that, agk-dm-dm-*.patch are of course the ones to look at.

Please keep [email protected] cc'ed.

Sorry, my fault for overlooking that, thanks greg.

Thanks & Regards,
Kamalesh Babulal,

Hi, Greg,

I ran some tests with the fixed up version of this patch and the system fails to come up.

I see the WARN_ON in lib/kref.c:33 and the system fails to boot beyond that point. I have not yet found time to debug it though.

	Warm Regards,
	Balbir Singh
	Linux Technology Center
	IBM, ISTL

How did I not notice them? Yeah, those guys would be on the suspicious list...

I've gotten it down to about 128 patches, but it's interesting what ended up bracketed by GOOD/BAD:

powerpc-invalid-size-for-swapper_pg_dir-with-config_pte_64bit=y.patch GOOD
#GREGKH-DRIVER-START
gregkh-driver-nozomi.patch

    gregkh-moby-patch-tree....

unbork-gregkh-driver-kset-convert-sys-devices-to-use-kset_create-vioc.patch BAD

Would I be remiss in hypothesising that something in gregkh-driver-kobject-* changed something, and now we need a agk-dm-dm-kobject-fixupage.patch?

The actual bug is probably elsewhere, but it *manifests* due to gregkh-driver tree. Will probably be tomorrow before I get it down further...

Are you running into same issue, I am getting on my machine ? Are you using IPR driver ?

Thanks,
Badari

e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007) ipr 0000:d0:01.0: Found IOA with IRQ: 119
ipr 0000:d0:01.0: Starting IOA initialization sequence.
ipr 0000:d0:01.0: Adapter firmware version: 020A005E
ipr 0000:d0:01.0: IOA initialized.
scsi0 : IBM 570B Storage Adapter

scsi 0:0:3:0: Direct-Access     IBM   H0 HUS103014FL3800  RPQF PQ: 0 ANSI: 4
scsi 0:0:5:0: Direct-Access     IBM   H0 HUS103014FL3800  RPQF PQ: 0 ANSI: 4
scsi 0:0:8:0: Direct-Access     IBM   H0 HUS103014FL3800  RPQF PQ: 0 ANSI: 4
scsi 0:0:15:0: Enclosure         IBM      VSBPD4E2  U4SCSI 7134 PQ: 0 ANSI: 2
------------[ cut here ]------------
Badness at lib/kref.c:33
NIP: c0000000002e1254 LR: c0000000002dfbd8 CTR: c0000000002e60f0
REGS: c00000003f0db050 TRAP: 0700   Not tainted  (2.6.24-rc4-mm1)
MSR: 8000000000029032 <EE,ME,IR,DR>  CR: 28002042  XER: 0000000f

TASK = c00000003f0d78d0[1] 'swapper' THREAD: c00000003f0d8000 CPU: 0
GPR00: 0000000000000000 c00000003f0db2d0 c000000000724098 c00000003f131620
GPR04: fffffffffffffff1 fffffffffffffffe 000000000000000a ffffffffffffffff
GPR08: c00000003d4d9000 c00000003f0cbfe0 c000000000556591 0000000000000073
GPR12: 0000000024002084 c000000000651980 0000000000000000 0000000000000000
GPR16: 0000000000000000 d000080080080000 c00000000064d6f0 c00000003d4d9570
GPR20: c00000003d4d94b8 0000000000000002 c00000003d4d9170 c00000003d4d9170
GPR24: c00000003d4d9000 0000000000000001 c00000003d570d58 c00000003d570d18
GPR28: 0000000000000000 c00000003d4d9260 c0000000006b5400 c00000003f131618 NIP [c0000000002e1254] .kref_get+0x10/0x2c
LR [c0000000002dfbd8] .kobject_get+0x24/0x40

Call Trace:

[c00000003f0db2d0] [c00000003f0db360] 0xc00000003f0db360 (unreliable) [c00000003f0db350] [c0000000002e00e8] .kobject_add+0x8c/0x21c [c00000003f0db3e0] [c000000000344b00] .device_add+0xd4/0x680 [c00000003f0db4a0] [c0000000003a1c4c] .scsi_alloc_target+0x218/0x404 [c00000003f0db570] [c0000000003a1fb4] .__scsi_scan_target+0xa8/0x640 [c00000003f0db6b0] [c0000000003a25c4] .scsi_scan_channel+0x78/0xdc [c00000003f0db750] [c0000000003a26f8] .scsi_scan_host_selected+0xd0/0x140 [c00000003f0db7f0] [c0000000003c3ff4] .ipr_probe+0x1270/0x1348 [c00000003f0db960] [c0000000002f4808] .pci_device_probe+0x124/0x194 [c00000003f0dba10] [c000000000347e8c] .driver_probe_device+0x110/0x1f0 [c00000003f0dbaa0] [c000000000348014] .__driver_attach+0xa8/0x134 [c00000003f0dbb30] [c0000000003472ac] .bus_for_each_dev+0x80/0xd0 [c00000003f0dbbe0] [c000000000347c14] .driver_attach+0x28/0x40 [c00000003f0dbc60] [c000000000346788] .bus_add_driver+0xfc/0x2d0 [c00000003f0dbd10] [c0000000003482cc] .driver_register+0x80/0x9c [c00000003f0dbd90] [c0000000002f4bb0] .__pci_register_driver+0x5c/0xcc [c00000003f0dbe20] [c000000000604b38] .ipr_init+0x38/0x50 [c00000003f0dbea0] [c0000000005d6428] .kernel_init+0x214/0x3ec [c00000003f0dbf90] [c000000000026734] .kernel_thread+0x4c/0x68 Instruction dump:
e8410028 39200001 38210080 7d234b78 e8010010 ebc1fff0 7c0803a6 4e800020 80030000 7c0007b4 2f800000 409e0008 <0fe00000> 7c001828 30000001

Instead? It won't apply. And it doesn't help on top of git-scsi. It helps if 3 hunks involving __scsi_kill_request() are ducked.

I don't know, it all depends on what is in the dm patches. Hopefully everything that I have changed will manifest with a build breakage to obviously detect that something needs to be fixed up.

But I've been known to mess things up that I didn't intend to :)

If there's anything that I can do to test this, please let me know.

thanks,

greg k-h

Doh, you are correct, I'll make sure that I fix this up before applying it.

thanks,

greg k-h

Given that it *didn't* totally break the build, it's likely a fencepost error or some similar issue...

I wanted to give a heads-up, in case there was a D'Oh! patch hiding. At worst, I just need another 6 or 7 bisects to figure out which of those 120-ish patches is the culprit. With luck I'll end up stopped on a patch that in retrospect was obviously busticated. If not, we'll have to apply the usual more drastic measures. If you don't have a box that's already demonstrating it, and you don't have any obvious candidates, it's likely that the most productive use of everybody's time is for you to chase down any other kobject issues while I bisect the problem down further...

That's not good, that warning means that someone has tried to use this kref _before_ it was initialized, so there is a logic error in the code that was previously being papered over with the lack of this message in the kobject code.

I do have this same message availble as a patch for the kobject core, it would be interesting if you could just run 2.6.24-rc4 with just this patch:
http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-01-driver/kobject-warn.patch

it might take some fuzz to fit properly, but all you really want to do is add:

	WARN_ON(atomic_read(&kobj->kref.refcount));

before the kref_init() call in kobject_init().

thanks,

greg k-h

What's the value of SYSFS_DEPRECATED? Care to set it to yes, if it isn't, and try again?

A fix for LVM to handle symlinks instead of directories is in the LVM CVS tree, but there wasn't a release since August.

Kay

I released it yesterday:-)

Alasdair

[email protected]

  LDS     arch/x86/vdso/vdso32/vdso32.lds
  AS      arch/x86/vdso/vdso32/note.o
  AS      arch/x86/vdso/vdso32/int80.o
  VDSO    arch/x86/vdso/vdso32-int80.so.dbg

OBJCOPY arch/x86/vdso/vdso32-int80.so
AS arch/x86/vdso/vdso32/sysenter.o
VDSO arch/x86/vdso/vdso32-sysenter.so.dbg
OBJCOPY arch/x86/vdso/vdso32-sysenter.so
AS arch/x86/vdso/vdso32.o
CC arch/x86/vdso/vdso32-setup.o
VDSOSYM arch/x86/vdso/vdso32-int80-syms.lds
VDSOSYM arch/x86/vdso/vdso32-sysenter-syms.lds
VDSOSYM arch/x86/vdso/vdso32-syms.lds

@@ -3,4 +3,3 @@
 VDSO32_sigreturn = 0x0400;
 VDSO32_vsyscall = 0x0414;
 VDSO32_vsyscall_eh_frame_size = 0x044;
-VDSO32_vsyscall_eh_frame_size = 0x058;

make[1]: *** [arch/x86/vdso/vdso32-syms.lds] Error 1
make: *** [arch/x86/vdso] Error 2

# cat arch/x86/vdso/vdso32-int80-syms.lds
VDSO32_PRELINK = 0x0;
VDSO32_rt_sigreturn = 0x040c;
VDSO32_sigreturn = 0x0400;
VDSO32_vsyscall = 0x0414;
VDSO32_vsyscall_eh_frame_size = 0x044;

# cat arch/x86/vdso/vdso32-sysenter-syms.lds
VDSO32_PRELINK = 0x0;
VDSO32_SYSENTER_RETURN = 0x0424;
VDSO32_rt_sigreturn = 0x040c;
VDSO32_sigreturn = 0x0400;
VDSO32_vsyscall = 0x0414;
VDSO32_vsyscall_eh_frame_size = 0x058;

# scripts/ver_linux 
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux calimero 2.6.24-rc4-g81b45b40 #2 PREEMPT Thu Dec 6 00:39:02 CET 2007 i686 GNU/Linux

Gnu C                  4.1.3
Gnu make               3.81
binutils               2.18
util-linux             2.13
mount                  2.13
module-init-tools      3.3-pre2
e2fsprogs              1.40.2
reiserfsprogs          3.6.19
reiser4progs           1.0.6
pcmciautils            014
PPP                    2.4.4
Linux C Library        2.6.1
Dynamic linker (ldd)   2.6.1
Procps                 3.2.7
Net-tools              1.60
Console-tools          0.2.3
oprofile               0.9.3
Sh-utils               5.97
udev                   113
wireless-tools         29
Modules Loaded         radeon drm lp nls_iso8859_1 nls_cp850 vfat fat reiser4 lzo_decompress lzo_compress eeprom w83781d hwmon_vid snd_ens1371 gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event firewire_ohci firewire_core snd_seq sg crc_itu_t snd_timer snd_seq_device sr_mod cdrom uhci_hcd snd i2c_viapro ohci1394 ata_generic pcspkr floppy 8250_pnp 8250 serial_core soundcore snd_page_alloc via686a rtc ieee1394 usbcore parport_pc parport ne2k_pci 8390 via_agp agpgart evdev dm_snapshot reiserfs sd_mod pata_via libata scsi_mod dm_mirror dm_mod

.config attached
~~
laurent

#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc4-mm1
# Thu Dec 6 23:05:19 2007
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_ARCH_SUPPORTS_KVM=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/hdb6"
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_PLATFORM=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_USB_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_OZ99X is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set

#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_SC6000 is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #

#

# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
# CONFIG_USB_SPEEDTOUCH is not set
# CONFIG_USB_CXACRU is not set
CONFIG_USB_UEAGLEATM=m
# CONFIG_USB_XUSBATM is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_VIRTUALIZATION is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=m
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m

#
# Layered filesystems
#
CONFIG_ECRYPT_FS=m
# CONFIG_UNION_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y

#
# Page alloc debug is incompatible with Software Suspend on i386 #
CONFIG_DEBUG_RODATA=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

Dunno. Maybe Roland's VDSO rework?

I *knew* there was a D'Oh! error in here. ;)

Bisection is fast closing in on gregkh-driver-block-device.patch, which broke my LVM almost the exact same way the *last* time it showed up in -mm ;)

I seem to recall it was 'nash' rather than LVM that had the indigestion the last time around.

Oh, it must not, if SYSFS_DEPRECATED=y is set. I hope we fixed all issues. Please let us know if it does not work, then we will need to look into it.

I think that a recent nash should work, even with SYSFS_DEPRECATED=n. Anyway, nothing should change when SYSFS_DEPRECATED set, nash works fine here, with that.

Kay

How can I find Roland's patches, so I can try backing them out? I looked in the broken out patches and only saw one related to VDSO. Backing it out did not help. I tried searching for messages to LKML sent by "roland" but mostly got a bunch of folks sending spam.

Thanks,
Miles

They're all clumped into git-x86.patch. Hard.

I found:
http://marc.info/?l=linux-kernel&m=119550978915647&w=2
through
http://marc.info/?l=linux-kernel&m=119551057816829&w=2
(I was unable to locate the 6th patch in the set)

When I tried backing out the patches, there were tons of errors. I guess I'll punt on trying to build this MM tree. Sorry.

Miles

2.6.24-rc4 with above patch booted fine without any warnings. But 2.6.24-rc4-mm1 doesn't boot, it hangs after following messages.

e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007) ipr 0000:d0:01.0: Found IOA with IRQ: 119
ipr 0000:d0:01.0: Starting IOA initialization sequence.
ipr 0000:d0:01.0: Adapter firmware version: 020A005E
ipr 0000:d0:01.0: IOA initialized.
scsi0 : IBM 570B Storage Adapter

scsi 0:0:3:0: Direct-Access     IBM   H0 HUS103014FL3800  RPQF PQ: 0 ANSI: 4
scsi 0:0:5:0: Direct-Access     IBM   H0 HUS103014FL3800  RPQF PQ: 0 ANSI: 4
scsi 0:0:8:0: Direct-Access     IBM   H0 HUS103014FL3800  RPQF PQ: 0 ANSI: 4
scsi 0:0:15:0: Enclosure         IBM      VSBPD4E2  U4SCSI 7134 PQ: 0 ANSI: 2
------------[ cut here ]------------
Badness at lib/kref.c:33
NIP: c0000000002e1254 LR: c0000000002dfbd8 CTR: c0000000002e60f0
REGS: c00000003f0db050 TRAP: 0700   Not tainted  (2.6.24-rc4-mm1)
MSR: 8000000000029032 <EE,ME,IR,DR>  CR: 28002042  XER: 0000000f

TASK = c00000003f0d78d0[1] 'swapper' THREAD: c00000003f0d8000 CPU: 0
GPR00: 0000000000000000 c00000003f0db2d0 c000000000724098 c00000003f131620
GPR04: fffffffffffffff1 fffffffffffffffe 000000000000000a ffffffffffffffff
GPR08: c00000003d4d9000 c00000003f0cbfe0 c000000000556591 0000000000000073
GPR12: 0000000024002084 c000000000651980 0000000000000000 0000000000000000
GPR16: 0000000000000000 d000080080080000 c00000000064d6f0 c00000003d4d9570
GPR20: c00000003d4d94b8 0000000000000002 c00000003d4d9170 c00000003d4d9170
GPR24: c00000003d4d9000 0000000000000001 c00000003d570d58 c00000003d570d18
GPR28: 0000000000000000 c00000003d4d9260 c0000000006b5400 c00000003f131618 NIP [c0000000002e1254] .kref_get+0x10/0x2c
LR [c0000000002dfbd8] .kobject_get+0x24/0x40

Call Trace:

[c00000003f0db2d0] [c00000003f0db360] 0xc00000003f0db360 (unreliable) [c00000003f0db350] [c0000000002e00e8] .kobject_add+0x8c/0x21c [c00000003f0db3e0] [c000000000344b00] .device_add+0xd4/0x680 [c00000003f0db4a0] [c0000000003a1c4c] .scsi_alloc_target+0x218/0x404 [c00000003f0db570] [c0000000003a1fb4] .__scsi_scan_target+0xa8/0x640 [c00000003f0db6b0] [c0000000003a25c4] .scsi_scan_channel+0x78/0xdc [c00000003f0db750] [c0000000003a26f8] .scsi_scan_host_selected+0xd0/0x140 [c00000003f0db7f0] [c0000000003c3ff4] .ipr_probe+0x1270/0x1348 [c00000003f0db960] [c0000000002f4808] .pci_device_probe+0x124/0x194 [c00000003f0dba10] [c000000000347e8c] .driver_probe_device+0x110/0x1f0 [c00000003f0dbaa0] [c000000000348014] .__driver_attach+0xa8/0x134 [c00000003f0dbb30] [c0000000003472ac] .bus_for_each_dev+0x80/0xd0 [c00000003f0dbbe0] [c000000000347c14] .driver_attach+0x28/0x40 [c00000003f0dbc60] [c000000000346788] .bus_add_driver+0xfc/0x2d0 [c00000003f0dbd10] [c0000000003482cc] .driver_register+0x80/0x9c [c00000003f0dbd90] [c0000000002f4bb0] .__pci_register_driver+0x5c/0xcc [c00000003f0dbe20] [c000000000604b38] .ipr_init+0x38/0x50 [c00000003f0dbea0] [c0000000005d6428] .kernel_init+0x214/0x3ec [c00000003f0dbf90] [c000000000026734] .kernel_thread+0x4c/0x68 Instruction dump:
e8410028 39200001 38210080 7d234b78 e8010010 ebc1fff0 7c0803a6 4e800020 80030000 7c0007b4 2f800000 409e0008 <0fe00000> 7c001828 30000001

Thanks,
Badari

This looks like a scsi issue to me, I don't see how the kref changes could cause this backtrace/oops, do you?

thanks,

greg k-h

Some assembler versions automagically optimize .eh_frame contents, changing their size. The CFI in sysenter.S was not using optimal formatting, so it would be changed by newer/smarter assemblers. This ran afoul of the wired constant for padding out the other vDSO images to match its size. This changes the original hand-coded source to use the optimal format encoding for its operations. That leaves nothing more for a fancy assembler to do, so the sizes will match the wired-in expected size regardless of the assembler version.

---
 arch/x86/vdso/vdso32/int80.S    |    2 +-
 arch/x86/vdso/vdso32/syscall.S  |    2 +-
 arch/x86/vdso/vdso32/sysenter.S |   18 ++++++------------
 3 files changed, 8 insertions(+), 14 deletions(-)

index be4b7a9..b15b7c0 100644
@@ -50,7 +50,7 @@ __kernel_vsyscall:
 	/*
 	 * Pad out the segment to match the size of the sysenter.S version.
 	 */
-VDSO32_vsyscall_eh_frame_size = 0x44
+VDSO32_vsyscall_eh_frame_size = 0x40
 	.section .data,"aw",@progbits
 	.space VDSO32_vsyscall_eh_frame_size-(.LENDFDEDLSI-.LSTARTFRAMEDLSI), 0
 	.previous

index fe88d34..5415b56 100644
@@ -71,7 +71,7 @@ __kernel_vsyscall:
 	/*
 	 * Pad out the segment to match the size of the sysenter.S version.
 	 */
-VDSO32_vsyscall_eh_frame_size = 0x44
+VDSO32_vsyscall_eh_frame_size = 0x40
 	.section .data,"aw",@progbits
 	.space VDSO32_vsyscall_eh_frame_size-(.LENDFDE1-.LSTARTFRAME), 0
 	.previous

index 902d5fc..e2800af 100644
@@ -84,31 +84,25 @@ VDSO32_SYSENTER_RETURN:	/* Symbol used by sysenter.c via vdso32-syms.h */
 	.uleb128 0
 	/* What follows are the instructions for the table generation.
 	   We have to record all changes of the stack pointer.  */
-	.byte 0x04		/* DW_CFA_advance_loc4 */
-	.long .Lpush_ecx-.LSTART_vsyscall
+	.byte 0x40 + (.Lpush_ecx-.LSTART_vsyscall) /* DW_CFA_advance_loc */
 	.byte 0x0e		/* DW_CFA_def_cfa_offset */
 	.byte 0x08		/* RA at offset 8 now */
-	.byte 0x04		/* DW_CFA_advance_loc4 */
-	.long .Lpush_edx-.Lpush_ecx
+	.byte 0x40 + (.Lpush_edx-.Lpush_ecx) /* DW_CFA_advance_loc */
 	.byte 0x0e		/* DW_CFA_def_cfa_offset */
 	.byte 0x0c		/* RA at offset 12 now */
-	.byte 0x04		/* DW_CFA_advance_loc4 */
-	.long .Lenter_kernel-.Lpush_edx
+	.byte 0x40 + (.Lenter_kernel-.Lpush_edx) /* DW_CFA_advance_loc */
 	.byte 0x0e		/* DW_CFA_def_cfa_offset */
 	.byte 0x10		/* RA at offset 16 now */
 	.byte 0x85, 0x04	/* DW_CFA_offset %ebp -16 */
 	/* Finally the epilogue.  */
-	.byte 0x04		/* DW_CFA_advance_loc4 */
-	.long .Lpop_ebp-.Lenter_kernel
+	.byte 0x40 + (.Lpop_ebp-.Lenter_kernel)	/* DW_CFA_advance_loc */
 	.byte 0x0e		/* DW_CFA_def_cfa_offset */
 	.byte 0x0c		/* RA at offset 12 now */
 	.byte 0xc5		/* DW_CFA_restore %ebp */
-	.byte 0x04		/* DW_CFA_advance_loc4 */
-	.long .Lpop_edx-.Lpop_ebp
+	.byte 0x40 + (.Lpop_edx-.Lpop_ebp) /* DW_CFA_advance_loc */
 	.byte 0x0e		/* DW_CFA_def_cfa_offset */
 	.byte 0x08		/* RA at offset 8 now */
-	.byte 0x04		/* DW_CFA_advance_loc4 */
-	.long .Lpop_ecx-.Lpop_edx
+	.byte 0x40 + (.Lpop_ecx-.Lpop_edx) /* DW_CFA_advance_loc */
 	.byte 0x0e		/* DW_CFA_def_cfa_offset */
 	.byte 0x04		/* RA at offset 4 now */
 	.align 4

Confirm this fixes the compile errors I was seeing with x86.git

Harvey

Badari,

I am unable to get past lib/kref.c:33 and cut here. The machine just stalls, I see no output at the console. I don't get a backtrace like you do, even with xmon enabled :(

	Warm Regards,
	Balbir Singh
	Linux Technology Center
	IBM, ISTL

Hi,

2.6.24-rc4-mm1 build failed at drivers/net/wireless/ath5k/base.c for some inline functions like this:
drivers/net/wireless/ath5k/base.c:292: sorry, unimplemented: inlining failed in call to 'ath5k_extend_tsf': function body not available

fix it with adjust the order of inline function body.

---
drivers/net/wireless/ath5k/base.c | 67 ++++++++++++++++----------------------

1 file changed, 29 insertions(+), 38 deletions(-)

diff -upr linux/drivers/net/wireless/ath5k/base.c linux.new/drivers/net/wireless/ath5k/base.c
@@ -250,8 +250,19 @@ static int 	ath5k_rxbuf_setup(struct ath
 static int 	ath5k_txbuf_setup(struct ath5k_softc *sc,
 				struct ath5k_buf *bf,
 				struct ieee80211_tx_control *ctl);
+
 static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
-				struct ath5k_buf *bf);
+				struct ath5k_buf *bf)
+{
+	BUG_ON(!bf);
+	if (!bf->skb)
+		return;
+	pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
+			PCI_DMA_TODEVICE);
+	dev_kfree_skb(bf->skb);
+	bf->skb = NULL;
+}
+
 /* Queues setup */
 static struct 	ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc,
 				int qtype, int subtype);

@@ -278,14 +289,29 @@ static int 	ath5k_beacon_setup(struct at
 				struct ieee80211_tx_control *ctl);
 static void 	ath5k_beacon_send(struct ath5k_softc *sc);
 static void 	ath5k_beacon_config(struct ath5k_softc *sc);
-static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp);
+
+static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
+{
+	u64 tsf = ath5k_hw_get_tsf64(ah);
+
+	if ((tsf & 0x7fff) < rstamp)
+		tsf -= 0x8000;
+
+	return (tsf & ~0x7fff) | rstamp;
+}
+
 /* Interrupt handling */
 static int 	ath5k_init(struct ath5k_softc *sc);
 static int 	ath5k_stop_locked(struct ath5k_softc *sc);
 static int 	ath5k_stop_hw(struct ath5k_softc *sc);
 static irqreturn_t ath5k_intr(int irq, void *dev_id);
 static void 	ath5k_tasklet_reset(unsigned long data);
-static inline void ath5k_update_txpow(struct ath5k_softc *sc);
+
+static inline void ath5k_update_txpow(struct ath5k_softc *sc)
+{
+	ath5k_hw_set_txpower_limit(sc->ah, 0);
+}
+
 static void 	ath5k_calibrate(unsigned long data);
 /* LED functions */
 static void 	ath5k_led_off(unsigned long data);

@@ -1341,21 +1367,6 @@ err_unmap:
 	return ret;
 }
 
-static inline void
-ath5k_txbuf_free(struct ath5k_softc *sc, struct ath5k_buf *bf)
-{
-	BUG_ON(!bf);
-	if (!bf->skb)
-		return;
-	pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
-			PCI_DMA_TODEVICE);
-	dev_kfree_skb(bf->skb);
-	bf->skb = NULL;
-}
-
-
-
-
 /**************\
 * Queues setup *
 \**************/

@@ -2046,20 +2057,6 @@ ath5k_beacon_config(struct ath5k_softc *
 #undef TSF_TO_TU
 }
 
-static inline
-u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
-{
-	u64 tsf = ath5k_hw_get_tsf64(ah);
-
-	if ((tsf & 0x7fff) < rstamp)
-		tsf -= 0x8000;
-
-	return (tsf & ~0x7fff) | rstamp;
-}
-
-
-
-
 /********************\
 * Interrupt handling *
 \********************/

@@ -2295,12 +2292,6 @@ ath5k_tasklet_reset(unsigned long data)
 	ath5k_reset(sc->hw);
 }
 
-static inline void
-ath5k_update_txpow(struct ath5k_softc *sc)
-{
-	ath5k_hw_set_txpower_limit(sc->ah, 0);
-}
-
 /*
  * Periodically recalibrate the PHY to account
  * for temperature/environment changes.

The 2.6.24-rc4 with the above patch, boots fine for me either, and with 2.6.24-rc4-mm1 i get similar backtrace,

Badness at lib/kref.c:33
NIP: c00000000021908c LR: c000000000217b88 CTR: c00000000029b71c
REGS: c00000003c066fc0 TRAP: 0700 Not tainted (2.6.24-rc4-mm1-autokern1)
MSR: 8000000000029032 <EE,ME,IR,DR> CR: 88002022 XER: 00000001 TASK = c00000003ef4c840[339] 'insmod' THREAD: c00000003c064000 CPU: 0
GPR00: 0000000000000000 c00000003c067240 c0000000005d32c0 c00000003e0101a0
GPR04: fffffffffffffff2 fffffffffffffffe 000000000000000a 0000000000000002
GPR08: 0000000000000000 c00000003ef8ae50 ffffffffffffffff c000000000449269
GPR12: 0000000024002084 c000000000515980 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000240000 0000000000000000
GPR20: 0000000010000290 0000000000000002 c00000003ef3f970 c00000003ef3f970
GPR24: 0000000000000001 0000000000000000 c00000003c039958 c00000003c039918
GPR28: 0000000000000000 c00000003ef3fa60 c00000000058e588 c00000003e010198 NIP [c00000000021908c] .kref_get+0x10/0x2c
LR [c000000000217b88] .kobject_get+0x20/0x3c

Call Trace:
[c00000003c067240] [c000000000217a48] .kobject_set_name_vargs+0x38/0x60 (unreliable)
[c00000003c0672c0] [c000000000217ffc] .kobject_add+0x88/0x20c
[c00000003c067350] [c00000000029b7ec] .device_add+0xd0/0x648
[c00000003c067410] [d000000000613c84] .scsi_alloc_target+0x238/0x414 [scsi_mod]
[c00000003c0674e0] [d000000000614e70] .__scsi_scan_target+0xac/0x718 [scsi_mod]
[c00000003c067630] [d00000000061566c] .scsi_scan_channel+0x78/0xdc [scsi_mod]
[c00000003c0676d0] [d0000000006157f0] .scsi_scan_host_selected+0x120/0x194 [scsi_mod]
[c00000003c067780] [d000000000682148] .ibmvscsi_probe+0x450/0x4fc [ibmvscsic]
[c00000003c067870] [c000000000025fe8] .vio_bus_probe+0x74/0x9c
[c00000003c067900] [c00000000029f2c8] .driver_probe_device+0x110/0x1ec
[c00000003c067990] [c00000000029f57c] .__driver_attach+0xd0/0x160
[c00000003c067a20] [c00000000029da58] .bus_for_each_dev+0x7c/0xcc
[c00000003c067ad0] [c00000000029f634] .driver_attach+0x28/0x40
[c00000003c067b50] [c00000000029e6a4] .bus_add_driver+0xe8/0x2b4
[c00000003c067c00] [c00000000029fd80] .driver_register+0x80/0x9c
[c00000003c067c80] [c0000000000260b0] .vio_register_driver+0x40/0x5c
[c00000003c067d10] [d000000000682c04] .init_module+0x68/0xa4 [ibmvscsic]
[c00000003c067da0] [c00000000009301c] .sys_init_module+0xf4/0x1ac
[c00000003c067e30] [c00000000000872c] syscall_exit+0x0/0x40

Instruction dump:
7d808120 4e800020 38a00000 4bfffad0 38000001 90030000 7c0004ac 4e800020 80030000 7c0007b4 2f800000 40be0008 <0fe00000> 7c001828 30000001 7c00192d

Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

Thanks. That enabled me to compile as well. Now, if I can figure out why the resulting kernel has a boot process that hangs... :-)

Miles

How about running 2.6.24-rc4 with _only_ the patch to this driver to convert it to krefs? Does that combination cause problems?

The patch is at:
http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-01-driver/kobject-convert-hvcs-to-use-kref-not-kobject.patch

and you can also try:
http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-01-driver/kobject-convert-hvc_console-to-use-kref-not-kobject.patch
if you have the hardware.

thanks,

greg k-h

thanks, applied.

Ingo

in theory the git merges could be generated as a flat series of patch files:

x86.git.foo-fixes.patch
x86.git.bar-updates.patch
x86.git.foo-fixes-feh.patch
...

which could also include the commit log. "git-log -p" might be a suitable generator. For example, x86.git can be processed per commit, via this script:

  for N in `git-rev-list --reverse --no-merges --remove-empty master..mm`; do 
    git-log -p $N
  done

the following git-export-quilt script (just wrote it, might be buggy, so careful - and it blows away the patches/ directory wherever you run it) will generate a series file into patches/series that can be applied via quilt:

  rm -rf patches
  mkdir patches
  for N in `git-rev-list --reverse --no-merges --remove-empty master..mm`; do
   git-log -p -1 $N > .tmp
   export SUBJECT=`head -5 .tmp | tail -1`

   # generate filename out of subject line:
   FILE=x86.git-"`echo $SUBJECT | cut -c10- |
        tr '[:punct:] \t' '-' | tr -s - | tr '[:upper:]' '[:lower:]'`"

   # generate unique name:
   while [ -f patches/$FILE.patch ]; do FILE="$FILE"_; done

echo $FILE.patch
mv .tmp patches/$FILE.patch
echo $FILE.patch >> patches/series
done

ls -l patches/series

i ran this script over x86.git and it produced a patch series with 247 patches that quilt was able to push correctly. (in theory this concept should work for other git trees too - but i have not tried it)

this would increase the series size quite substantially though - but it would make cherry-picking and patch based bisection a lot easier.

Ingo

Yeah, this (very likely) due to the new SACK processing (in net-2.6.25). I'll look what could go wrong with fack_count calculations, most likely it's the reason (I've found earlier one out-of-place retransmission segment in one of my test case which already indicated that there's something incorrect with them but didn't have time to debug it yet).

Thanks for report. Some info about how easily you can reproduce & couple of sentences about the test case might be useful later on when evaluating the fix.

 i.

Fix a panic, by changing
hidinput_mapping_quirks(,, unsigned long *bit,)
to
hidinput_mapping_quirks(,, unsigned long **bit,)

The `bit' in this function is an out parameter.

---
 drivers/hid/hid-input-quirks.c |   36 +++++++++++++++----------------
 drivers/hid/hid-input.c        |    2 -
 include/linux/hid.h            |    2 -
 3 files changed, 20 insertions(+), 20 deletions(-)

@@ -526,7 +526,7 @@ extern void hidinput_disconnect(struct h
 int hid_set_field(struct hid_field *, unsigned, __s32);
 int hid_input_report(struct hid_device *, int type, u8 *, int, int);
 int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
-int hidinput_mapping_quirks(struct hid_usage *, struct input_dev *, unsigned long *, int *);
+int hidinput_mapping_quirks(struct hid_usage *, struct input_dev *, unsigned long **, int *);
 void hidinput_event_quirks(struct hid_device *, struct hid_field *, struct hid_usage *, __s32);
 int hidinput_apple_event(struct hid_device *, struct input_dev *, struct hid_usage *, __s32);
 void hid_input_field(struct hid_device *hid, struct hid_field *field, __u8 *data, int interrupt);

@@ -382,7 +382,7 @@ static void hidinput_configure_usage(str
 	}
 
 	/* handle input mappings for quirky devices */
-	ret = hidinput_mapping_quirks(usage, input, bit, &max);
+	ret = hidinput_mapping_quirks(usage, input, &bit, &max);
 	if (ret)
 		goto mapped;
 

@@ -16,16 +16,16 @@
 #include <linux/input.h>
 #include <linux/hid.h>
 
-#define map_abs(c)      do { usage->code = c; usage->type = EV_ABS; bit = input->absbit; *max = ABS_MAX; } while (0)
-#define map_rel(c)      do { usage->code = c; usage->type = EV_REL; bit = input->relbit; *max = REL_MAX; } while (0)
-#define map_key(c)      do { usage->code = c; usage->type = EV_KEY; bit = input->keybit; *max = KEY_MAX; } while (0)
-#define map_led(c)      do { usage->code = c; usage->type = EV_LED; bit = input->ledbit; *max = LED_MAX; } while (0)
+#define map_abs(c)      do { usage->code = c; usage->type = EV_ABS; *bit = input->absbit; *max = ABS_MAX; } while (0)
+#define map_rel(c)      do { usage->code = c; usage->type = EV_REL; *bit = input->relbit; *max = REL_MAX; } while (0)
+#define map_key(c)      do { usage->code = c; usage->type = EV_KEY; *bit = input->keybit; *max = KEY_MAX; } while (0)
+#define map_led(c)      do { usage->code = c; usage->type = EV_LED; *bit = input->ledbit; *max = LED_MAX; } while (0)
 
-#define map_abs_clear(c)        do { map_abs(c); clear_bit(c, bit); } while (0)
-#define map_key_clear(c)        do { map_key(c); clear_bit(c, bit); } while (0)
+#define map_abs_clear(c)        do { map_abs(c); clear_bit(c, *bit); } while (0)
+#define map_key_clear(c)        do { map_key(c); clear_bit(c, *bit); } while (0)
 
 static int quirk_belkin_wkbd(struct hid_usage *usage, struct input_dev *input,
-			      unsigned long *bit, int *max)
+			      unsigned long **bit, int *max)
 {
 	if ((usage->hid & HID_USAGE_PAGE) != HID_UP_CONSUMER)
 		return 0;

@@ -41,7 +41,7 @@ static int quirk_belkin_wkbd(struct hid_
 }
 
 static int quirk_cherry_cymotion(struct hid_usage *usage, struct input_dev *input,
-			      unsigned long *bit, int *max)
+			      unsigned long **bit, int *max)
 {
 	if ((usage->hid & HID_USAGE_PAGE) != HID_UP_CONSUMER)
 		return 0;

@@ -57,7 +57,7 @@ static int quirk_cherry_cymotion(struct 
 }
 
 static int quirk_logitech_ultrax_remote(struct hid_usage *usage, struct input_dev *input,
-			      unsigned long *bit, int *max)
+			      unsigned long **bit, int *max)
 {
 	if ((usage->hid & HID_USAGE_PAGE) != HID_UP_LOGIVENDOR)
 		return 0;