usb regression in 2.6.24-rc4
Greetings guys & gals;
This was sent about an hour ago to the usb-devel list also.
-------------
Just a few minutes ago I needed to make use of my scanner, an Epson 1250u.
Firing up xsane, the usual select the device menu window didn't show, and it went straight to my tv card as the only input device.
I couldn't recall the name of the tool that scans for scanners that's in the sane package, or should be, so I then did an lsusb, but got an empty result!
Unplugging the usb cable from the scanner, then reconnecting the usb cable got me the usual disconnect and connect messages in the log, but xsane still couldn't find it.
So I rebooted to 2.6.24-rc4 again, same result. lsusb still gave an empty result. The two kernels were generated from the same .config as far as I know. The -rc3 .config was fed to a "make oldconfig" to make the -rc4 .config as is the usual practice.
So I then rebooted to 2.6.24-rc3, and it all works again. I got the scanning done and the pix sent on their merry way.
Anybody have a suggestion of what to check, or maybe a patch to revert? Or a .config option that needs to be enabled?
Signature · 6 lines
Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Nothing is impossible for the man who doesn't have to do it himself. -- A.H. Weiler
Quoted 1 line · Gene Heskett
Greetings guys & gals;
Hi ,
Quoted 20 lines
This was sent about an hour ago to the usb-devel list also.
-------------
Just a few minutes ago I needed to make use of my scanner, an Epson 1250u.Firing up xsane, the usual select the device menu window didn't show, and it went straight to my tv card as the only input device.
I couldn't recall the name of the tool that scans for scanners that's in the sane package, or should be, so I then did an lsusb, but got an empty result!
Unplugging the usb cable from the scanner, then reconnecting the usb cable got me the usual disconnect and connect messages in the log, but xsane still couldn't find it.
So I rebooted to 2.6.24-rc4 again, same result. lsusb still gave an empty result. The two kernels were generated from the same .config as far as I know. The -rc3 .config was fed to a "make oldconfig" to make the -rc4 .config as is the usual practice.
Quoted 6 lines
So I then rebooted to 2.6.24-rc3, and it all works again. I got the scanning done and the pix sent on their merry way.
Anybody have a suggestion of what to check, or maybe a patch to revert? Or a .config option that needs to be enabled?
Sounds for me like this one :
http://lkml.org/lkml/2007/12/6/409
Gabriel
Quoted 28 lines · Gabriel C
Quoted 1 line · Gene Heskett
Greetings guys & gals;
Hi ,
Quoted 23 lines
This was sent about an hour ago to the usb-devel list also.
-------------
Just a few minutes ago I needed to make use of my scanner, an Epson 1250u.Firing up xsane, the usual select the device menu window didn't show, and it went straight to my tv card as the only input device.
I couldn't recall the name of the tool that scans for scanners that's in the sane package, or should be, so I then did an lsusb, but got an empty result!
Unplugging the usb cable from the scanner, then reconnecting the usb cable got me the usual disconnect and connect messages in the log, but xsane still couldn't find it.
So I rebooted to 2.6.24-rc4 again, same result. lsusb still gave an empty result. The two kernels were generated from the same .config as far as I know. The -rc3 .config was fed to a "make oldconfig" to make the -rc4 .config as is the usual practice.
So I then rebooted to 2.6.24-rc3, and it all works again. I got the scanning done and the pix sent on their merry way.
Quoted 7 lines
Quoted 3 lines
Anybody have a suggestion of what to check, or maybe a patch to revert? Or a .config option that needs to be enabled?
Sounds for me like this one :
Yes, http://bugzilla.kernel.org/show_bug.cgi?id=9504 .
Gene, please try the patch at http://lkml.org/lkml/2007/12/7/364
Thanks,
Rafael