HDQ/1-wire support for OMAP2430/3430

You resolved all issues with patchet we were talking about, so I only would like to see documentation update about how hdq operates in w1 stack and kernel parameters you are using in the driver.

I am posting a five patches series to support HDQ/1-wire module of OMAP2430 and 3430 platforms. The HDQ support is internally

using a bq27000 battery driver.

Please let me know if there are any comments on my patch set.

Evgeniy Polyakov,
I would like to thank you for clearing my doubts about the W1 subsystem. Please let me know if you have any further comments on my patches.

Hi,

Quoted 3 lines

You resolved all issues with patchet we were talking about, so I only would like to see documentation update about how hdq operates in w1 stack and kernel parameters you are using in the driver.

Sure. I will write the necessary documentation.

Thanks,
Madhu

-----Original Message-----
From: Evgeniy Polyakov [mailto:[email protected]]
Sent: Monday, December 10, 2007 5:04 PM
To: Madhusudhan Chikkature Rajashekar
Cc: [email protected]; [email protected]
Subject: Re: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430

Hi.

Quoted 1 line · Madhusudhan Chikkature Rajashekar

I am posting a five patches series to support HDQ/1-wire module of OMAP2430 and 3430 platforms. The HDQ support is internally

tested

Quoted 7 lines

using a bq27000 battery driver.

Please let me know if there are any comments on my patch set.

Evgeniy Polyakov,
I would like to thank you for clearing my doubts about the W1 subsystem. Please let me know if you have any further comments on my patches.

Ack, thanks a lot for your work.

You resolved all issues with patchet we were talking about, so I only would like to see documentation update about how hdq operates in w1 stack and kernel parameters you are using in the driver.

-----Original Message-----
From: Tony Lindgren [mailto:[email protected]]
Sent: Sunday, December 16, 2007 5:52 AM
To: Madhusudhan Chikkature Rajashekar
Cc: 'Evgeniy Polyakov'; [email protected]; [email protected]
Subject: Re: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430

Quoted 3 lines · Madhusudhan Chikkature Rajashekar

Hi,

Quoted 1 line

You resolved all issues with patchet we were talking

about, so I only

Quoted 4 lines

Quoted 2 lines

would like to see documentation update about how hdq operates in w1 stack and kernel parameters you are using in the driver.

Sure. I will write the necessary documentation.

Quoted 8 lines

Thanks,
Madhu

-----Original Message-----
From: Evgeniy Polyakov [mailto:[email protected]]
Sent: Monday, December 10, 2007 5:04 PM
To: Madhusudhan Chikkature Rajashekar
Cc: [email protected];

[email protected]

Quoted 5 lines

Subject: Re: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430

Hi.

On Mon, Dec 10, 2007 at 03:45:25PM +0530, Madhusudhan

Quoted 1 line · Chikkature Rajashekar

Quoted 1 line

I am posting a five patches series to support HDQ/1-wire

module of OMAP2430 and 3430 platforms. The HDQ support is internally

Quoted 7 lines

tested

Quoted 6 lines

using a bq27000 battery driver.

Please let me know if there are any comments on my patch set.

Evgeniy Polyakov,
I would like to thank you for clearing my doubts about

the W1 subsystem.

Quoted 5 lines

Quoted 1 line

Please let me know if you have any further comments on my patches.

Ack, thanks a lot for your work.

You resolved all issues with patchet we were talking about,

so I only

Quoted 2 lines

would like to see documentation update about how hdq operates in w1 stack and kernel parameters you are using in the driver.

Madhu, can you please repost your complete series one more time? Please
make sure the message subject describes what the patch does instead of the same subject for all of them. The subject line appears in the git-commit
message, and it's a pain to re-edit each patch before applying.

Thanks,

Tony