Skip to contentSkip to conversation

Problem with matrox framebuffer in 2.6.23.x

DISCUSSION Dirk Heinrichs 1 participant 2 messages Dec 13, 2007 – Dec 14, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

I apologize if this is not the right place to ask, but I wanted to check if there is a mistake from my side before I open a new report in bugzilla.

The problem I have is that with 2.6.23.[89], the screen turns black immediately after switching into framebuffer mode. This doesn't happen with 2.6.22.12. All kernels have been compiled with GCC 4.1.3 on an Ubuntu box with a K6-3 cpu and the fb boot options for all kernels are:
video=matroxfb:vesa:0x105.

The config files for the working and non-working kernels are attached in gzipped form. I don't see anything in the configs that would trigger the problem, but maybe somebody here on the list does.

Many thanks in advance...

Dirk

#1 lore raw
Quoted 1 line · On Thursday 13 December 2007 13:28:25 Dirk Heinrichs wrote:

... and the fb boot options for all kernels are: video=matroxfb:vesa:0x105.

Got a hint via p.m. to change the above to video=matroxfb:1024x768-16@85 for the 2.6.23.x kernels. And it works fine.

Bye...

Dirk