Skip to contentSkip to conversation

Please pull u-boot-mpc83xx.git

U-Boot-Users Kim Phillips 3 participants 6 messages Dec 20, 2007 – Jan 8, 2008

lore
Share & tools
lore
#0 lore raw

Wolfgang D., please pull mainly mpc837x support and libfdt code updates for mpc83xx (this pull request depends on the mpc85xx pull request):

The following changes since commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2:
Wolfgang Denk (1):

        Release v1.3.1

are available in the git repository at:

git://www.denx.de/git/u-boot-mpc83xx.git

Anton Vorontsov (1):
MPC8360E-MDS: configure and enable second UART

Dave Liu (6):
mpc83xx: Add the support of MPC837x SoC
mpc83xx: Add the support of MPC8315E SoC
mpc83xx: Add the support of MPC837xEMDS board
mpc83xx: Add the MPC837xEMDS board readme
mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
mpc83xx: update the CREDITS and MAINTAINERS

Joakim Tjernlund (1):
Add support CONFIG_UEC_ETH3 in MPC83xx

Kim Phillips (8):
mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
mpc83xx: fix remaining fdt_find_node_by_path references
mpc83xx: supress compiler warning
mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
mpc83xx: convert to using do_fixup_*()
mpc83xx: remove FLAT_TREE code
mpc83xx: rm remaining FLAT_TREE code

Kumar Gala (1):
Remove CONFIG options related to OF that we dont use

Paul Gortmaker (3):
sbc8349: Remove board specific ECC code
sbc8349: migrate board to libfdt
sbc8349: enable libfdt by default on WRS SBC8349 board.

Timur Tabi (1):
83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions

 CREDITS                                   |    5 +
 MAINTAINERS                               |    2 +
 MAKEALL                                   |    1 +
 Makefile                                  |   10 +
 board/freescale/mpc8313erdb/mpc8313erdb.c |   14 +-
 board/freescale/mpc8323erdb/mpc8323erdb.c |   10 -
 board/freescale/mpc832xemds/mpc832xemds.c |   14 +-
 board/freescale/mpc832xemds/pci.c         |   46 +--
 board/freescale/mpc8349emds/mpc8349emds.c |   14 +-
 board/freescale/mpc8349emds/pci.c         |   76 ++---
 board/freescale/mpc8349itx/mpc8349itx.c   |   14 +-
 board/freescale/mpc8349itx/pci.c          |   76 ++---
 board/freescale/mpc8360emds/mpc8360emds.c |   61 +++-
 board/freescale/mpc8360emds/pci.c         |   46 +--
 board/freescale/mpc837xemds/Makefile      |   50 +++
 board/freescale/mpc837xemds/config.mk     |   28 ++
 board/freescale/mpc837xemds/mpc837xemds.c |  132 +++++++
 board/freescale/mpc837xemds/pci.c         |   65 +++
 board/sbc8349/pci.c                       |   52 ++-
 board/sbc8349/sbc8349.c                   |  347 +----------------
 cpu/mpc83xx/Makefile                      |    2 +-
 cpu/mpc83xx/cpu.c                         |  362 ++----------------
 cpu/mpc83xx/cpu_init.c                    |    6 +-
 cpu/mpc83xx/fdt.c                         |   72 ++++
 cpu/mpc83xx/pci.c                         |   83 ++---
 cpu/mpc83xx/spd_sdram.c                   |    7 +-
 cpu/mpc83xx/speed.c                       |  201 ++++++++--
 doc/README.mpc837xemds                    |  104 +++++
 drivers/net/tsec.c                        |   10 +
 drivers/qe/uec.c                          |   23 ++
 include/asm-ppc/global_data.h             |   15 +-
 include/asm-ppc/immap_83xx.h              |  145 +++++++-
 include/configs/MPC8313ERDB.h             |    9 +-
 include/configs/MPC8323ERDB.h             |   12 +-
 include/configs/MPC832XEMDS.h             |   12 +-
 include/configs/MPC8349EMDS.h             |    8 +-
 include/configs/MPC8349ITX.h              |   11 +-
 include/configs/MPC8360EMDS.h             |   15 +-
 include/configs/MPC837XEMDS.h             |  600 +++++++++++++++++++++++++++++
 include/configs/sbc8349.h                 |   10 +-
 include/mpc83xx.h                         |  261 ++++++++++++--
 net/eth.c                                 |    3 +
 42 files changed, 1953 insertions(+), 1081 deletions(-)
 create mode 100644 board/freescale/mpc837xemds/Makefile
 create mode 100644 board/freescale/mpc837xemds/config.mk
 create mode 100644 board/freescale/mpc837xemds/mpc837xemds.c
 create mode 100644 board/freescale/mpc837xemds/pci.c
 create mode 100644 cpu/mpc83xx/fdt.c
 create mode 100644 doc/README.mpc837xemds
 create mode 100644 include/configs/MPC837XEMDS.h

p.s. I was unable to get the UEC and PHY latency fixes
to a satisfactory state without re-reverting the relocation for 83xx commit (assuming that was what was causing Joakim's and Russell's problem). Now I'm going on vacation (random email access). btw, they should probably go through Ben Warren (net custodian) anyway.

Kim

#1 lore raw
Quoted 13 lines

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of Kim Phillips
Sent: den 21 december 2007 00:57
To: Wolfgang Denk
Cc: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Please pull u-boot-mpc83xx.git

Wolfgang D., please pull mainly mpc837x support and libfdt code updates
for mpc83xx (this pull request depends on the mpc85xx pull request):

Quoted 8 lines

The following changes since commit
41be969f4957115ed7b1fe8b890bfaee99d7a7a2:
Wolfgang Denk (1):

        Release v1.3.1

are available in the git repository at:

git://www.denx.de/git/u-boot-mpc83xx.git

gaa, no network driver fixes? When do you plan to send them?

Jocke

#2 lore raw
Quoted 18 lines · Joakim Tjernlund
Quoted 18 lines

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of Kim Phillips
Sent: den 21 december 2007 00:57
To: Wolfgang Denk
Cc: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Please pull u-boot-mpc83xx.git

Wolfgang D., please pull mainly mpc837x support and libfdt code updates
for mpc83xx (this pull request depends on the mpc85xx pull request):

The following changes since commit
41be969f4957115ed7b1fe8b890bfaee99d7a7a2:
Wolfgang Denk (1):

        Release v1.3.1
Quoted 7 lines
Quoted 3 lines

are available in the git repository at:

git://www.denx.de/git/u-boot-mpc83xx.git

gaa, no network driver fixes? When do you plan to send them?

Jocke

Kim, what about the network driver fixes we worked on before X-mas? Please push those too before the merge window closes.

Jocke

#3 lore raw
In reply to Joakim Tjernlund
Quoted 18 lines · On Fri, 21 Dec 2007 01:15:08 +0100 "Joakim Tjernlund"…
Quoted 18 lines

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of Kim Phillips
Sent: den 21 december 2007 00:57
To: Wolfgang Denk
Cc: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Please pull u-boot-mpc83xx.git

Wolfgang D., please pull mainly mpc837x support and libfdt code updates
for mpc83xx (this pull request depends on the mpc85xx pull request):

The following changes since commit
41be969f4957115ed7b1fe8b890bfaee99d7a7a2:
Wolfgang Denk (1):

        Release v1.3.1
Quoted 5 lines
Quoted 3 lines

are available in the git repository at:

git://www.denx.de/git/u-boot-mpc83xx.git

gaa, no network driver fixes? When do you plan to send them?

as I said in the original pull request:

"p.s. I was unable to get the UEC and PHY latency fixes
to a satisfactory state without re-reverting the relocation for 83xx commit (assuming that was what was causing Joakim's and Russell's problem). Now I'm going on vacation (random email access). btw, they should probably go through Ben Warren (net custodian) anyway."

however, networking now seems to be totally broken, so whatever we can get together for the new deadline for Ben, I'll try and help with.

Kim

#4 lore raw
Quoted 35 lines · Kim Phillips
Quoted 18 lines · On Fri, 21 Dec 2007 01:15:08 +0100 "Joakim Tjernlund"…
Quoted 18 lines

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of Kim Phillips
Sent: den 21 december 2007 00:57
To: Wolfgang Denk
Cc: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Please pull u-boot-mpc83xx.git

Wolfgang D., please pull mainly mpc837x support and libfdt code updates
for mpc83xx (this pull request depends on the mpc85xx pull request):

The following changes since commit
41be969f4957115ed7b1fe8b890bfaee99d7a7a2:
Wolfgang Denk (1):

        Release v1.3.1
Quoted 5 lines
Quoted 3 lines

are available in the git repository at:

git://www.denx.de/git/u-boot-mpc83xx.git

gaa, no network driver fixes? When do you plan to send them?

as I said in the original pull request:

"p.s. I was unable to get the UEC and PHY latency fixes
to a satisfactory state without re-reverting the relocation for 83xx commit (assuming that was what was causing Joakim's and Russell's problem). Now I'm going on vacation (random email access). btw, they should probably go through Ben Warren (net custodian) anyway."

Quoted 4 lines

however, networking now seems to be totally broken, so whatever we can get together for the new deadline for Ben, I'll try and help with.

Kim

Ahh, I never read that far so I didn't see that p.s.
Not sure what problem you are referring to, but I don't
have any problems with the latest patches for the new networking driver with the minor updates I sent December 18, I don't need to enable full relocation.

I think the relocation patch is only needed if you move the flash mapping somewhere else like Russel did.

Jocke

#5 lore raw
In reply to Kim Phillips
Quoted 2 lines · In message <[email protected]> you wrote:

Wolfgang D., please pull mainly mpc837x support and libfdt code updates for mpc83xx (this pull request depends on the mpc85xx pull request):

Please try and avoid such dependencies on other custodian trees.

Quoted 7 lines

The following changes since commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2:
Wolfgang Denk (1):

        Release v1.3.1

are available in the git repository at:

git://www.denx.de/git/u-boot-mpc83xx.git

Sorry, this does not apply cleanly even though I pulled the FDT and 85xx repos first:

CONFLICT (content): Merge conflict in cpu/mpc83xx/cpu.c

Please fix and send new pull request.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Am besten betrachten Sie Fehlermeldungen als eine  Art  Psycho-Test,
mit  dem  herausgefunden  werden soll, wie belastbar Sie sind."
 - Dr. R. Wonneberger, Kompaktf?hrer LaTeX, Kap. 1.6: Fehlermeldungen