Build failure in drivers/net/ehea/ehea_main.c
Hi Andrew,
Kernel build fails on my machine with error :
LD drivers/net/ehea/built-in.o
CC [M] drivers/net/ehea/ehea_main.odrivers/net/ehea/ehea_main.c: In function ‘ehea_driver_sysfs_add’:drivers/net/ehea/ehea_main.c:2812: error: ‘struct device_driver’ has no member named ‘kobj’drivers/net/ehea/ehea_main.c:2815: error: ‘struct device_driver’ has no member named ‘kobj’drivers/net/ehea/ehea_main.c:2818: error: ‘struct device_driver’ has no member named ‘kobj’drivers/net/ehea/ehea_main.c: In function ‘ehea_driver_sysfs_remove’:drivers/net/ehea/ehea_main.c:2830: error: ‘struct device_driver’ has no member named ‘kobj’
make[3]: *** [drivers/net/ehea/ehea_main.o] Error 1
make[2]: *** [drivers/net/ehea] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2
The structure device_driver(in device.h) has a member struct driver_private which contains the member kobj (according to drivers/base/base.h).
But in device.h struct driver_private has been declared localy and neither defined nor included from base.h.
So my effort to use driver->driver_private->obj also does not work. (I am surprised from where do you access the struct device_driver)
Thanks and Regards
Sudhir Kumar
Quoted 21 lines · Sudhir Kumar
Hi Andrew,
Kernel build fails on my machine with error :LD
drivers/net/ehea/built-in.o
CC [M]drivers/net/ehea/ehea_main.odrivers/net/ehea/ehea_main.c: In function ???ehea_driver_sysfs_add???:drivers/net/ehea/ehea_main.c:2812: error: ???structdevice_driver??? has no member named ???kobj???drivers/net/ehea/ehea_main.c:2815: error: ???structdevice_driver??? has no member named ???kobj???drivers/net/ehea/ehea_main.c:2818: error: ???structdevice_driver??? has no member named ???kobj???drivers/net/ehea/ehea_main.c: In function ???ehea_driver_sysfs_remove???:drivers/net/ehea/ehea_main.c:2830: error: ???structdevice_driver??? has no member named ???kobj???
make[3]: *** [drivers/net/ehea/ehea_main.o] Error 1
make[2]: *** [drivers/net/ehea] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2
Quoted 6 lines
The structure
device_driver(in device.h)has a member structdriver_privatewhich contains the member kobj (according todrivers/base/base.h).
But indevice.hstructdriver_privatehas been declared localy and neither defined nor included frombase.h.
So my effort to usedriver->driver_private->objalso does not work. (I am surprised from where do you access the structdevice_driver)
That is because a driver should not be accessing such a field.
And especially not in this manner, why would this driver be creating a symlink that has already been created by the driver core? This whole thing can just be removed with no problems. Can you try just removing the ehea_driver_sysfs_add and ehea_driver_sysfs_remove functions to verify this as I don't have the hardware present to test it out.
thanks,
greg k-h
Hi,
sorry for answering so late, I'm only tracking netdev and ppc mailing list.
Quoted 7 lines · Greg KH
Quoted 6 lines
The structure
device_driver(in device.h)has a member structdriver_privatewhich contains the member kobj (according todrivers/base/base.h).
But indevice.hstructdriver_privatehas been declared localy and neither defined nor included frombase.h.
So my effort to usedriver->driver_private->objalso does not work. (I am surprised from where do you access the structdevice_driver)
Quoted 7 lines
That is because a driver should not be accessing such a field.
And especially not in this manner, why would this driver be creating a symlink that has already been created by the driver core? This whole thing can just be removed with no problems. Can you try just removing the
ehea_driver_sysfs_addandehea_driver_sysfs_removefunctions to verify this as I don't have the hardware present to test it out.
The eHEA driver tries to orginize its sys-entries as close as possible to other ethernet drivers. Each eHEA NIC has multiple ports which is not that common in PCI. This means that each port is represented by a subdirectory which has not the "driver" sys-link, only the root directory has. Some tools expect to have this driver link in each port directory. That is the reason why this link is created manually.
Are there any other ways to create this link?
Regards,
Jan-Bernd Themann + Christoph Raisch
Quoted 20 lines · Jan-Bernd Themann
Hi,
sorry for answering so late, I'm only tracking netdev and ppc mailing list.
Quoted 7 lines · Greg KH
Quoted 6 lines
The structure
device_driver(in device.h)has a member structdriver_privatewhich contains the member kobj (according todrivers/base/base.h).
But indevice.hstructdriver_privatehas been declared localy and neither defined nor included frombase.h.
So my effort to usedriver->driver_private->objalso does not work. (I am surprised from where do you access the structdevice_driver)Quoted 7 lines
That is because a driver should not be accessing such a field.
And especially not in this manner, why would this driver be creating a symlink that has already been created by the driver core? This whole thing can just be removed with no problems. Can you try just removing the
ehea_driver_sysfs_addandehea_driver_sysfs_removefunctions to verify this as I don't have the hardware present to test it out.
Quoted 8 lines
The eHEA driver tries to orginize its sys-entries as close as possible to other ethernet drivers. Each eHEA NIC has multiple ports which is not that common in PCI. This means that each port is represented by a subdirectory which has not the "driver" sys-link, only the root directory has. Some tools expect to have this driver link in each port directory. That is the reason why this link is created manually.
Are there any other ways to create this link?
This is now broken in mainline...
drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_add':drivers/net/ehea/ehea_main.c:2812: error: 'struct device_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2815: error: 'struct device_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2818: error: 'struct device_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_remove':drivers/net/ehea/ehea_main.c:2830: error: 'struct device_driver' has no member named 'kobj'
Quoted 33 lines · Nathan Lynch
Quoted 20 lines · Jan-Bernd Themann
Hi,
sorry for answering so late, I'm only tracking netdev and ppc mailing list.
Quoted 7 lines · Greg KH
Quoted 6 lines
The structure
device_driver(in device.h)has a member structdriver_privatewhich contains the member kobj (according todrivers/base/base.h).
But indevice.hstructdriver_privatehas been declared localy and neither defined nor included frombase.h.
So my effort to usedriver->driver_private->objalso does not work. (I am surprised from where do you access the structdevice_driver)Quoted 7 lines
That is because a driver should not be accessing such a field.
And especially not in this manner, why would this driver be creating a symlink that has already been created by the driver core? This whole thing can just be removed with no problems. Can you try just removing the
ehea_driver_sysfs_addandehea_driver_sysfs_removefunctions to verify this as I don't have the hardware present to test it out.Quoted 8 lines
The eHEA driver tries to orginize its sys-entries as close as possible to other ethernet drivers. Each eHEA NIC has multiple ports which is not that common in PCI. This means that each port is represented by a subdirectory which has not the "driver" sys-link, only the root directory has. Some tools expect to have this driver link in each port directory. That is the reason why this link is created manually.
Are there any other ways to create this link?
This is now broken in mainline...
Quoted 10 lines
drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_add':drivers/net/ehea/ehea_main.c:2812: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2815: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2818: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_remove':drivers/net/ehea/ehea_main.c:2830: error: 'structdevice_driver' has no member named 'kobj'
Crap, I missed that one. I'll go fix it up right now...
sorry about this.
greg k-h
Quoted 33 lines · Nathan Lynch
Quoted 20 lines · Jan-Bernd Themann
Hi,
sorry for answering so late, I'm only tracking netdev and ppc mailing list.
Quoted 7 lines · Greg KH
Quoted 6 lines
The structure
device_driver(in device.h)has a member structdriver_privatewhich contains the member kobj (according todrivers/base/base.h).
But indevice.hstructdriver_privatehas been declared localy and neither defined nor included frombase.h.
So my effort to usedriver->driver_private->objalso does not work. (I am surprised from where do you access the structdevice_driver)Quoted 7 lines
That is because a driver should not be accessing such a field.
And especially not in this manner, why would this driver be creating a symlink that has already been created by the driver core? This whole thing can just be removed with no problems. Can you try just removing the
ehea_driver_sysfs_addandehea_driver_sysfs_removefunctions to verify this as I don't have the hardware present to test it out.Quoted 8 lines
The eHEA driver tries to orginize its sys-entries as close as possible to other ethernet drivers. Each eHEA NIC has multiple ports which is not that common in PCI. This means that each port is represented by a subdirectory which has not the "driver" sys-link, only the root directory has. Some tools expect to have this driver link in each port directory. That is the reason why this link is created manually.
Are there any other ways to create this link?
This is now broken in mainline...
Quoted 10 lines
drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_add':drivers/net/ehea/ehea_main.c:2812: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2815: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2818: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_remove':drivers/net/ehea/ehea_main.c:2830: error: 'structdevice_driver' has no member named 'kobj'
Does the patch below fix this? That driver should not have been trying to create symlinks that the driver core has already created for it. Dumb, dumb, dumb...
thanks,
greg k-h
------------------
--- drivers/net/ehea/ehea_main.c | 37 ------------------------------------- 1 file changed, 37 deletions(-)
drivers/net/ehea/ehea_main.c +0 -37
@@ -2804,34 +2804,6 @@ static void __devinit logical_port_releaof_node_put (port->ofdev.node); } -static int ehea_driver_sysfs_add (struct device *dev, -struct device_driver *driver) -{ -int ret; - - ret =sysfs_create_link (&driver->kobj, &dev->kobj, -kobject_name (&dev->kobj)); -if (ret ==0 ) { - ret =sysfs_create_link (&dev->kobj, &driver->kobj, -"driver" ); -if (ret) -sysfs_remove_link (&driver->kobj, -kobject_name (&dev->kobj)); - } -return ret; -} - -static void ehea_driver_sysfs_remove (struct device *dev, -struct device_driver *driver) -{ -struct device_driver *drv = driver; - -if (drv) { -sysfs_remove_link (&drv->kobj,kobject_name (&dev->kobj)); -sysfs_remove_link (&dev->kobj,"driver" ); - } -} -static struct device *ehea_register_port (struct ehea_port *port,struct device_node *dn) {
@@ -2856,16 +2828,8 @@ static struct device *ehea_register_port goto out_unreg_of_dev; } - ret =ehea_driver_sysfs_add (&port->ofdev.dev, &ehea_driver.driver); -if (ret) { -ehea_error ("failed to register sysfs driver link" ); - goto out_rem_dev_file; - } -return &port->ofdev.dev; -out_rem_dev_file: -device_remove_file (&port->ofdev.dev, &dev_attr_log_port_id); out_unreg_of_dev:of_device_unregister (&port->ofdev); out:
@@ -2874,7 +2838,6 @@ out:static void ehea_unregister_port (struct ehea_port *port) { -ehea_driver_sysfs_remove (&port->ofdev.dev, &ehea_driver.driver);device_remove_file (&port->ofdev.dev, &dev_attr_log_port_id);of_device_unregister (&port->ofdev); }
Quoted 42 lines · Greg KH
Quoted 30 lines · Nathan Lynch
Quoted 17 lines · Jan-Bernd Themann
Quoted 7 lines · Greg KH
Quoted 6 lines
The structure
device_driver(in device.h)has a member structdriver_privatewhich contains the member kobj (according todrivers/base/base.h).
But indevice.hstructdriver_privatehas been declared localy and neither defined nor included frombase.h.
So my effort to usedriver->driver_private->objalso does not work. (I am surprised from where do you access the structdevice_driver)Quoted 7 lines
That is because a driver should not be accessing such a field.
And especially not in this manner, why would this driver be creating a symlink that has already been created by the driver core? This whole thing can just be removed with no problems. Can you try just removing the
ehea_driver_sysfs_addandehea_driver_sysfs_removefunctions to verify this as I don't have the hardware present to test it out.Quoted 8 lines
The eHEA driver tries to orginize its sys-entries as close as possible to other ethernet drivers. Each eHEA NIC has multiple ports which is not that common in PCI. This means that each port is represented by a subdirectory which has not the "driver" sys-link, only the root directory has. Some tools expect to have this driver link in each port directory. That is the reason why this link is created manually.
Are there any other ways to create this link?
This is now broken in mainline...
Quoted 10 lines
drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_add':drivers/net/ehea/ehea_main.c:2812: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2815: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2818: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_remove':drivers/net/ehea/ehea_main.c:2830: error: 'structdevice_driver' has no member named 'kobj'
Quoted 2 lines
Does the patch below fix this? That driver should not have been trying to create symlinks that the driver core has already created for it.
Yes, it fixes the build error, by just removing the code that got broken. Jan-Bernd gave a rationale for creating the symlink that didn't really seem to be answered.
Quoted 43 lines · Nathan Lynch
Quoted 42 lines · Greg KH
Quoted 40 lines · Nathan Lynch
Quoted 17 lines · Jan-Bernd Themann
Quoted 7 lines · Greg KH
Quoted 6 lines
The structure
device_driver(in device.h)has a member structdriver_privatewhich contains the member kobj (according todrivers/base/base.h).
But indevice.hstructdriver_privatehas been declared localy and neither defined nor included frombase.h.
So my effort to usedriver->driver_private->objalso does not work. (I am surprised from where do you access the structdevice_driver)Quoted 7 lines
That is because a driver should not be accessing such a field.
And especially not in this manner, why would this driver be creating a symlink that has already been created by the driver core? This whole thing can just be removed with no problems. Can you try just removing the
ehea_driver_sysfs_addandehea_driver_sysfs_removefunctions to verify this as I don't have the hardware present to test it out.Quoted 8 lines
The eHEA driver tries to orginize its sys-entries as close as possible to other ethernet drivers. Each eHEA NIC has multiple ports which is not that common in PCI. This means that each port is represented by a subdirectory which has not the "driver" sys-link, only the root directory has. Some tools expect to have this driver link in each port directory. That is the reason why this link is created manually.
Are there any other ways to create this link?
This is now broken in mainline...
drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_add':drivers/net/ehea/ehea_main.c:2812: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2815: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2818: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_remove':drivers/net/ehea/ehea_main.c:2830: error: 'structdevice_driver' has no member named 'kobj'
Quoted 6 lines
Quoted 2 lines
Does the patch below fix this? That driver should not have been trying to create symlinks that the driver core has already created for it.
Yes, it fixes the build error, by just removing the code that got broken. Jan-Bernd gave a rationale for creating the symlink that didn't really seem to be answered.
See my other post to him. I do not see why this is not just duplicating the same exact code in the driver core. If you are trying to "fake out" userspace by saying a device is bound to a driver, well, that's just wrong.
thanks,
greg k-h
Quoted 17 lines · you
Quoted 16 lines · Greg KH
Quoted 14 lines · Nathan Lynch
Jan-Bernd Themann wrote:
This is now broken in mainline...
drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_add':drivers/net/ehea/ehea_main.c:2812: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2815: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2818: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_remove':drivers/net/ehea/ehea_main.c:2830: error: 'structdevice_driver' has no member named 'kobj'
Quoted 14 lines
Quoted 2 lines
Does the patch below fix this? That driver should not have been trying to create symlinks that the driver core has already created for it.
Yes, it fixes the build error, by just removing the code that got broken. Jan-Bernd gave a rationale for creating the symlink that didn't really seem to be answered.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
The eHEA driver tries to orginize its sys-entries as close as possible to other ethernet drivers. Each eHEA NIC has multiple ports which is not that common in PCI. This means that each port is represented by a subdirectory which has not the "driver" sys-link, only the root directory has. Some tools expect to have this driver link in each port directory. That is the reason why this link is created manually.
In addition to the explaination above:
Just to be sure that we talk about the same thing:
The eHEA driver controlls multiple eHEAs which have multiple ethernet ports each. So the logical structure looks like this:
eHEA1 ---> port1 (ethX)
-> port2 (ethX+1)
-> port3 (ethX+2)
...
eHEA2 ---> port1 (eth?)
-> port2
-> port3 ...
This structure is represented in /sys/bus/ibmebus/devices in the same way described above.
If you want to determine the driver belonging to an ethX, you would go the following path:/sys/class/net/ethX/device/driver
ls /sys/class/net/ethX/device:
drwxr-xr-x 2 root root 0 2008-01-29 10:00 . drwxr-xr-x 4 root root 0 2008-01-29 10:00 .. lrwxrwxrwx 1 root root 0 2008-01-29 10:00 bus -> ../../../../bus/ibmebus
-r--r--r-- 1 root root 4096 2008-01-29 10:00 devspec
lrwxrwxrwx 1 root root 0 2008-01-29 10:00 driver -> ../../../../bus/ibmebus/drivers/ehea
^^^^^
In our case this one is created by the code that does not work any longer.
The sym-link is not gereated automatically as the device for portX is added to the eHEA device (as subnode) where the eHEA device is not a bus.
If this sym-link is of interest (which I guess is the case as most devices have it) we have to create it somehow.
Would the following proposal work?
There is an exported kernel function called "device_bind_driver" which creates the same links. However, it does some additional stuff as well and there is currently no "device_unbind_driver" yet. Either "device_unbind_driver" needs to be added or the following two already existing functions could be exported:
driver_sysfs_adddriver_sysfs_remove
Regards,
Jan-Bernd & Christoph Raisch
Quoted 58 lines · Jan-Bernd Themann
Quoted 17 lines · you
Quoted 16 lines · Greg KH
Quoted 14 lines · Nathan Lynch
Jan-Bernd Themann wrote:
This is now broken in mainline...
drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_add':drivers/net/ehea/ehea_main.c:2812: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2815: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c:2818: error: 'structdevice_driver' has no member named 'kobj'drivers/net/ehea/ehea_main.c: In function 'ehea_driver_sysfs_remove':drivers/net/ehea/ehea_main.c:2830: error: 'structdevice_driver' has no member named 'kobj'Quoted 14 lines
Quoted 2 lines
Does the patch below fix this? That driver should not have been trying to create symlinks that the driver core has already created for it.
Yes, it fixes the build error, by just removing the code that got broken. Jan-Bernd gave a rationale for creating the symlink that didn't really seem to be answered.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
The eHEA driver tries to orginize its sys-entries as close as possible to other ethernet drivers. Each eHEA NIC has multiple ports which is not that common in PCI. This means that each port is represented by a subdirectory which has not the "driver" sys-link, only the root directory has. Some tools expect to have this driver link in each port directory. That is the reason why this link is created manually.
In addition to the explaination above:
Just to be sure that we talk about the same thing:
The eHEA driver controlls multiple eHEAs which have multiple ethernet ports each. So the logical structure looks like this:
eHEA1 ---> port1 (ethX)-> port2 (ethX+1) -> port3 (ethX+2) ... eHEA2 ---> port1 (eth?) -> port2 -> port3...
This structure is represented in/sys/bus/ibmebus/devicesin the same way described above.If you want to determine the driver belonging to an ethX, you would go the following path:
/sys/class/net/ethX/device/driverls
/sys/class/net/ethX/device:drwxr-xr-x 2 root root 0 2008-01-29 10:00 . drwxr-xr-x 4 root root 0 2008-01-29 10:00 .. lrwxrwxrwx 1 root root 0 2008-01-29 10:00 bus -> ../../../../bus/ibmebus
Quoted 7 lines
-r--r--r-- 1 root root 4096 2008-01-29 10:00 devspec
lrwxrwxrwx 1 root root 0 2008-01-29 10:00 driver -> ../../../../bus/ibmebus/drivers/ehea
^^^^^
In our case this one is created by the code that does not work any longer.The sym-link is not gereated automatically as the device for portX is added to the eHEA device (as subnode) where the eHEA device is not a bus.
Then please fix that, no other driver has this kind of problem, right? Are you just passing the wrong "device" to the networking subsystem?
Quoted 2 lines
If this sym-link is of interest (which I guess is the case as most devices have it) we have to create it somehow.
Why would you have to do this by hand? What makes this driver so unique in the kernel that it would have to do this? We have lots of other multi-port ethernet drivers today without this issue, right?
confused,
greg k-h
Greg KH <[email protected]> wrote on 29.01.2008 14:23:09:
Quoted 1 line · Jan-Bernd Themann
...
Quoted 1 line
Quoted 1 line
The sym-link is not gereated automatically as the device for portX is
added
Quoted 6 lines
Quoted 1 line
to the eHEA device (as subnode) where the eHEA device is not a bus.
Then please fix that, no other driver has this kind of problem, right? Are you just passing the wrong "device" to the networking subsystem?
Quoted 1 line
If this sym-link is of interest (which I guess is the case as most
devices
Quoted 9 lines
Quoted 1 line
have it) we have to create it somehow.
Why would you have to do this by hand? What makes this driver so unique in the kernel that it would have to do this? We have lots of other multi-port ethernet drivers today without this issue, right?
confused,
greg k-h
well, the major difference is hea is not PCI.
All PCI cards we checked have a 1:1 relationship between PCI function (PCI config space)
and a single ethernet port.
Even if the same Ethernet chip has two ports, it shows up as two separate adapters from the PCI perspective (two PCI entries in /sys/bus/pci/devices
host:/ # ls -l /sys/bus/pci/devices/0000\:c8\:01.0/ total 0
lrwxrwxrwx 1 root root 0 2008-01-28 14:59 bus -> ../../../../bus/pci
-r--r--r-- 1 root root 4096 2008-01-28 14:59 class
-rw-r--r-- 1 root root 256 2008-01-28 14:59 config
-r--r--r-- 1 root root 4096 2008-01-28 14:59 device
-r--r--r-- 1 root root 4096 2008-01-29 14:26 devspec
lrwxrwxrwx 1 root root 0 2008-01-28 14:59 driver ->
../../../../bus/pci/drivers/e1000
-r--r--r-- 1 root root 4096 2008-01-28 14:59 irq -r--r--r-- 1 root root 4096 2008-01-29 14:26 local_cpus -r--r--r-- 1 root root 4096 2008-01-28 14:59 modalias
lrwxrwxrwx 1 root root 0 2008-01-29 14:26 net:eth1 ->
../../../../class/net/eth1
-r--r--r-- 1 root root 4096 2008-01-28 14:59 resource
....
host:/ # ls -l /sys/bus/pci/devices/0000\:c8\:01.1/ total 0
lrwxrwxrwx 1 root root 0 2008-01-28 14:59 bus -> ../../../../bus/pci
-r--r--r-- 1 root root 4096 2008-01-28 14:59 class
-rw-r--r-- 1 root root 256 2008-01-28 14:59 config
-r--r--r-- 1 root root 4096 2008-01-28 14:59 device
-r--r--r-- 1 root root 4096 2008-01-29 14:29 devspec
lrwxrwxrwx 1 root root 0 2008-01-28 14:59 driver ->
../../../../bus/pci/drivers/e1000
-r--r--r-- 1 root root 4096 2008-01-28 14:59 irq -r--r--r-- 1 root root 4096 2008-01-29 14:29 local_cpus -r--r--r-- 1 root root 4096 2008-01-28 14:59 modalias
lrwxrwxrwx 1 root root 0 2008-01-29 14:29 net:eth2 ->
../../../../class/net/eth2
...
These pci functions corresponds to a/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port0
and/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port1
The busdriver currently does not find out, how many ports are in a /sys/bus/ibmebus/devices/789D.001.XXXXXX-P1.
This is up to the hardware specific driver responsible for ehea or ehca. Think of a PCI card where the PCI busdriver
can not determine how many ports are implemented on the card.
How should this be mapped to /sys ?
Should we try to "flatten" the ports to something like /sys/bus/ibmebus/devices/789D.001.XXXXXX-P1 /sys/bus/ibmebus/devices/789D.001.XXXXXX-P1_port0 /sys/bus/ibmebus/devices/789D.001.XXXXXX-P1_port1
...which means physical hierarchy information would look a bit strange, but could be the simpler one.
The way which corresponds to the hardware would be to improve the kernel in such a way that hierarchical ports also wortk for netdev_register.
Then we could keep this structure /sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port0 /sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port1
So, which way should we try?
Gruss / Regards
Christoph Raisch
Quoted 28 lines · Christoph Raisch
These pci functions corresponds to a
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port0
and/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port1The busdriver currently does not find out, how many ports are in a
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1.
This is up to the hardware specific driver responsible for ehea or ehca. Think of a PCI card where the PCI busdriver
can not determine how many ports are implemented on the card.How should this be mapped to /sys ?
Should we try to "flatten" the ports to something like
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1_port0/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1_port1
...which means physical hierarchy information would look a bit strange, but could be the simpler one.The way which corresponds to the hardware would be to improve the kernel in such a way that hierarchical ports also wortk for
netdev_register.
Then we could keep this structure/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port0/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port1
Quoted 7 lines
So, which way should we try?
Gruss / Regards
Christoph Raisch
Hi,
so far we fould 2 options. The ibmebus manages (add / remove) ONLY eHEA adapters (not ehea ethernet ports).
All ethernet ports have to be added / removed by the eHEA device driver when an eHEA adapter has been added by the ibmebus as a new device. This means the sysfs-links "driver" for our eHEA ethernet devices (ports) are not automatically generated.
Option 1)
- We can create then ourselves. Therefore we would
need two functions exported and included in the proper header file:
- static int driver_sysfs_add(struct device *dev)
- static void driver_sysfs_remove(struct device *dev)
Option 2)
- we just leave it out which would be inconsistent with other pci based ethernet adapters.
So far we prefer option 1.
Do you see any other ways we should investigate?
To resolve the build issue I've posted a first patch to remove the old sysfs links.
Regards,
Jan-Bernd & Christoph
Quoted 19 lines · Christoph Raisch
Greg KH <[email protected]> wrote on 29.01.2008 14:23:09:
Quoted 1 line · Jan-Bernd Themann
...
Quoted 1 line
Quoted 1 line
The sym-link is not gereated automatically as the device for portX is
added
Quoted 6 lines
Quoted 1 line
to the eHEA device (as subnode) where the eHEA device is not a bus.
Then please fix that, no other driver has this kind of problem, right? Are you just passing the wrong "device" to the networking subsystem?
Quoted 1 line
If this sym-link is of interest (which I guess is the case as most
devices
Quoted 6 lines
Quoted 1 line
have it) we have to create it somehow.
Why would you have to do this by hand? What makes this driver so unique in the kernel that it would have to do this? We have lots of other multi-port ethernet drivers today without this issue, right?
Quoted 5 lines
Quoted 3 lines
confused,
greg k-h
well, the major difference is hea is not PCI.
What is it? It has to live on some kind of bus, right?
Quoted 48 lines
All PCI cards we checked have a 1:1 relationship between PCI function (PCI config space) and a single ethernet port.
Even if the same Ethernet chip has two ports, it shows up as two separate adapters from the PCI perspective (two PCI entries in/sys/bus/pci/deviceshost:/ # ls -l /sys/bus/pci/devices/0000\:c8\:01.0/ total 0
lrwxrwxrwx 1 root root 0 2008-01-28 14:59 bus -> ../../../../bus/pci(quoted diff) +0
-4-r--r--r-- 1 root root 4096 2008-01-28 14:59 class -rw-r--r-- 1 root root 256 2008-01-28 14:59 config -r--r--r-- 1 root root 4096 2008-01-28 14:59 device -r--r--r-- 1 root root 4096 2008-01-29 14:26 devspeclrwxrwxrwx 1 root root 0 2008-01-28 14:59 driver ->
../../../../bus/pci/drivers/e1000(quoted diff) +0
-3-r--r--r-- 1 root root 4096 2008-01-28 14:59 irq -r--r--r-- 1 root root 4096 2008-01-29 14:26 local_cpus -r--r--r-- 1 root root 4096 2008-01-28 14:59 modaliaslrwxrwxrwx 1 root root 0 2008-01-29 14:26 net:eth1 ->
../../../../class/net/eth1
-r--r--r-- 1 root root 4096 2008-01-28 14:59 resource
....
host:/ # ls -l /sys/bus/pci/devices/0000\:c8\:01.1/ total 0
lrwxrwxrwx 1 root root 0 2008-01-28 14:59 bus -> ../../../../bus/pci(quoted diff) +0
-4-r--r--r-- 1 root root 4096 2008-01-28 14:59 class -rw-r--r-- 1 root root 256 2008-01-28 14:59 config -r--r--r-- 1 root root 4096 2008-01-28 14:59 device -r--r--r-- 1 root root 4096 2008-01-29 14:29 devspeclrwxrwxrwx 1 root root 0 2008-01-28 14:59 driver ->
../../../../bus/pci/drivers/e1000(quoted diff) +0
-3-r--r--r-- 1 root root 4096 2008-01-28 14:59 irq -r--r--r-- 1 root root 4096 2008-01-29 14:29 local_cpus -r--r--r-- 1 root root 4096 2008-01-28 14:59 modaliaslrwxrwxrwx 1 root root 0 2008-01-29 14:29 net:eth2 ->
../../../../class/net/eth2
...These pci functions corresponds to a
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port0
and/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port1The busdriver currently does not find out, how many ports are in a
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1.
This is up to the hardware specific driver responsible for ehea or ehca. Think of a PCI card where the PCI busdriver
can not determine how many ports are implemented on the card.
Quoted 8 lines
How should this be mapped to /sys ?
Should we try to "flatten" the ports to something like
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1_port0/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1_port1
...which means physical hierarchy information would look a bit strange, but could be the simpler one.
No. Why have a separate "port" device for every ethernet port? What keeps you from just creating the different network devices for your device, and pointing the parent to the same 789D.001.XXXXXX-P1 device?
Lots of PCI devices hang "class devices" off of them all the time, why would this be any different from that?
I think you all are trying to make this more complex than it really is :)
thanks,
greg k-h
Greg KH <[email protected]> wrote on 07.02.2008 23:17:12:
Quoted 2 lines · Christoph Raisch
What is it? It has to live on some kind of bus, right?
It is a piece of hardware with a firmware/hypervisor abstraction layer on top.
The hypervisor provides virtualization interfaces to
add and remove ethernet adapters and ports.
Each port is represented in the open firmware device tree (OFDT) as a subnode of the
ehea adapter node.
System P has a userspace DLPAR application communicating with firmware, the kernel, and
the hardware management console to change all that on the flight. This tool needs a capability to identify which open firmware device tree entry
belongs to which ethernet device.
Each node created by the ibmebus driver has a devspec entry associated to the
device node in OFDT, used by the DLPAR application.
Each port created by the ibmebus driver has a devspec entry associated to the
port node in OFDT, used by the DLPAR application.
Quoted 3 lines
Quoted 3 lines
host:/ # ls -l /sys/bus/pci/devices/0000\:c8\:01.0/ total 0
...
Quoted 1 line
Quoted 1 line
-r--r--r-- 1 root root 4096 2008-01-29 14:26 devspec
...
Quoted 9 lines
Quoted 9 lines
These pci functions corresponds to a
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port0
and/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/port1The busdriver currently does not find out, how many ports are in a
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1.
This is up to the hardware specific driver responsible for ehea or
ehca.
Quoted 12 lines
Quoted 11 lines
Think of a PCI card where the PCI busdriver
can not determine how many ports are implemented on the card.How should this be mapped to /sys ?
Should we try to "flatten" the ports to something like
/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1_port0/sys/bus/ibmebus/devices/789D.001.XXXXXX-P1_port1
...which means physical hierarchy information would look a bit strange, but could be the simpler one.
Quoted 7 lines
No. Why have a separate "port" device for every ethernet port? What keeps you from just creating the different network devices for your device, and pointing the parent to the same 789D.001.XXXXXX-P1 device?
I think you all are trying to make this more complex than it really is :)
If you register multiple netdevs in a ehea adapter node,
how is it possible to find out which ethXXX belongs to which devspec port entry in the OFDT?
Is there a simpler way than the one we chose to get this in addition?
Quoted 4 lines
thanks,
greg k-h
Gruss / Regards
Christoph Raisch
Quoted 20 lines · Jan-Bernd Themann
Hi,
sorry for answering so late, I'm only tracking netdev and ppc mailing list.
Quoted 7 lines · Greg KH
Quoted 6 lines
The structure
device_driver(in device.h)has a member structdriver_privatewhich contains the member kobj (according todrivers/base/base.h).
But indevice.hstructdriver_privatehas been declared localy and neither defined nor included frombase.h.
So my effort to usedriver->driver_private->objalso does not work. (I am surprised from where do you access the structdevice_driver)Quoted 7 lines
That is because a driver should not be accessing such a field.
And especially not in this manner, why would this driver be creating a symlink that has already been created by the driver core? This whole thing can just be removed with no problems. Can you try just removing the
ehea_driver_sysfs_addandehea_driver_sysfs_removefunctions to verify this as I don't have the hardware present to test it out.
Quoted 8 lines
The eHEA driver tries to orginize its sys-entries as close as possible to other ethernet drivers. Each eHEA NIC has multiple ports which is not that common in PCI. This means that each port is represented by a subdirectory which has not the "driver" sys-link, only the root directory has. Some tools expect to have this driver link in each port directory. That is the reason why this link is created manually.
Are there any other ways to create this link?
The driver core already creates this link for you. Don't try to duplicate what is already there for you.
It should just be a matter of deleting the code, and everything should be fine. See the patch that I just sent.
thanks,
greg k-h