Skip to contentSkip to conversation

OF-platform PATA driver

PATCH Applied Anton Vorontsov 4 participants 11 messages Jan 9, 2008 – Jan 16, 2008

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v4 cover OF-platform PATA driver

Hi all,

Here is the resend (aka v4) version of the OF-platform PATA driver and related patches.

Changes since v3:
- Acked-by: Paul Mundt <[email protected]>
- In the powerpc specific patch: update defconfig and use machine_device_initcall -- this is new call found in the galak/powerpc.git.

Changes since v2:
- "PPC" added to PATA_PLATFORM "depends on" Kconfig entry; I didn't remove EMBEDDED "depends on" -- this wasn't discussed much and these patches should not depend on the decision.
- cosmetic fixes;
- "s/ioport_shift/reg_shift/g" patch dropped.

Changes since v1:
- __pata_platform_probe now accepts pio_mask argument;
- pata-platform compatible property renamed to ata-generic;
- pata_of_platform understands pio-mode property. It's used to pass pio_mask to the __pata_platform_probe. That is, in ata-generic context pio-mode means "pio mode the bus already configured for";
- New optional patch that renames pata_platform_info's ioport_shift to reg_shift.

Changes since RFC:
- nuked drivers/ata/pata_platform.h;
- powerpc bits: proper localbus node added.

Signature · 4 lines
Anton Vorontsov
email: [email protected]
backup email: [email protected]
irc://irc.freenode.net/bd2
#1 lore raw

PATCH v4 1/3 pata_platform: make probe and remove functions device type neutral

Split pata_platform_{probe,remove} into two pieces:
1. pata_platform_{probe,remove} -- platform_device-dependant bits;
2. __ptata_platform_{probe,remove} -- device type neutral bits.

This is done to not duplicate code for the OF-platform driver.

---
 drivers/ata/pata_platform.c   |  144 ++++++++++++++++++++++++----------------
 include/linux/pata_platform.h |    9 +++
 2 files changed, 95 insertions(+), 58 deletions(-)
drivers/ata/pata_platform.c +86 -58
index ac03a90..224bb6c 100644
@@ -93,14 +93,9 @@ static struct ata_port_operations pata_platform_port_ops = {
 };
 
 static void pata_platform_setup_port(struct ata_ioports *ioaddr,
-				     struct pata_platform_info *info)
+				     unsigned int shift)
 {
-	unsigned int shift = 0;
-
 	/* Fixup the port shift for platforms that need it */
-	if (info && info->ioport_shift)
-		shift = info->ioport_shift;
-
 	ioaddr->data_addr	= ioaddr->cmd_addr + (ATA_REG_DATA    << shift);
 	ioaddr->error_addr	= ioaddr->cmd_addr + (ATA_REG_ERR     << shift);
 	ioaddr->feature_addr	= ioaddr->cmd_addr + (ATA_REG_FEATURE << shift);
@@ -114,8 +109,13 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
 }
 
 /**
- *	pata_platform_probe		-	attach a platform interface
- *	@pdev: platform device
+ *	__pata_platform_probe		-	attach a platform interface
+ *	@dev: device
+ *	@io_res: Resource representing I/O base
+ *	@ctl_res: Resource representing CTL base
+ *	@irq_res: Resource representing IRQ and its flags
+ *	@ioport_shift: I/O port shift
+ *	@__pio_mask: PIO mask
  *
  *	Register a platform bus IDE interface. Such interfaces are PIO and we
  *	assume do not support IRQ sharing.
@@ -135,42 +135,18 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
  *
  *	If no IRQ resource is present, PIO polling mode is used instead.
  */
-static int __devinit pata_platform_probe(struct platform_device *pdev)
+int __devinit __pata_platform_probe(struct device *dev,
+				    struct resource *io_res,
+				    struct resource *ctl_res,
+				    struct resource *irq_res,
+				    unsigned int ioport_shift,
+				    int __pio_mask)
 {
-	struct resource *io_res, *ctl_res;
 	struct ata_host *host;
 	struct ata_port *ap;
-	struct pata_platform_info *pp_info;
 	unsigned int mmio;
-	int irq;
-
-	/*
-	 * Simple resource validation ..
-	 */
-	if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) {
-		dev_err(&pdev->dev, "invalid number of resources\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Get the I/O base first
-	 */
-	io_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	if (io_res == NULL) {
-		io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		if (unlikely(io_res == NULL))
-			return -EINVAL;
-	}
-
-	/*
-	 * Then the CTL base
-	 */
-	ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1);
-	if (ctl_res == NULL) {
-		ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		if (unlikely(ctl_res == NULL))
-			return -EINVAL;
-	}
+	int irq = 0;
+	int irq_flags = 0;
 
 	/*
 	 * Check for MMIO
@@ -181,20 +157,21 @@ static int __devinit pata_platform_probe(struct platform_device *pdev)
 	/*
 	 * And the IRQ
 	 */
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		irq = 0;	/* no irq */
+	if (irq_res && irq_res->start > 0) {
+		irq = irq_res->start;
+		irq_flags = irq_res->flags;
+	}
 
 	/*
 	 * Now that that's out of the way, wire up the port..
 	 */
-	host = ata_host_alloc(&pdev->dev, 1);
+	host = ata_host_alloc(dev, 1);
 	if (!host)
 		return -ENOMEM;
 	ap = host->ports[0];
 
 	ap->ops = &pata_platform_port_ops;
-	ap->pio_mask = pio_mask;
+	ap->pio_mask = __pio_mask;
 	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
 	/*
@@ -209,25 +186,24 @@ static int __devinit pata_platform_probe(struct platform_device *pdev)
 	 * Handle the MMIO case
 	 */
 	if (mmio) {
-		ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, io_res->start,
+		ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start,
 				io_res->end - io_res->start + 1);
-		ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
+		ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start,
 				ctl_res->end - ctl_res->start + 1);
 	} else {
-		ap->ioaddr.cmd_addr = devm_ioport_map(&pdev->dev, io_res->start,
+		ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start,
 				io_res->end - io_res->start + 1);
-		ap->ioaddr.ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start,
+		ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start,
 				ctl_res->end - ctl_res->start + 1);
 	}
 	if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
-		dev_err(&pdev->dev, "failed to map IO/CTL base\n");
+		dev_err(dev, "failed to map IO/CTL base\n");
 		return -ENOMEM;
 	}
 
 	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
 
-	pp_info = pdev->dev.platform_data;
-	pata_platform_setup_port(&ap->ioaddr, pp_info);
+	pata_platform_setup_port(&ap->ioaddr, ioport_shift);
 
 	ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport",
 		      (unsigned long long)io_res->start,
@@ -235,26 +211,78 @@ static int __devinit pata_platform_probe(struct platform_device *pdev)
 
 	/* activate */
 	return ata_host_activate(host, irq, irq ? ata_interrupt : NULL,
-				 pp_info ? pp_info->irq_flags : 0,
-				 &pata_platform_sht);
+				 irq_flags, &pata_platform_sht);
 }
+EXPORT_SYMBOL_GPL(__pata_platform_probe);
 
 /**
- *	pata_platform_remove	-	unplug a platform interface
- *	@pdev: platform device
+ *	__pata_platform_remove		-	unplug a platform interface
+ *	@dev: device
  *
  *	A platform bus ATA device has been unplugged. Perform the needed
  *	cleanup. Also called on module unload for any active devices.
  */
-static int __devexit pata_platform_remove(struct platform_device *pdev)
+int __devexit __pata_platform_remove(struct device *dev)
 {
-	struct device *dev = &pdev->dev;
 	struct ata_host *host = dev_get_drvdata(dev);
 
 	ata_host_detach(host);
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(__pata_platform_remove);
+
+static int __devinit pata_platform_probe(struct platform_device *pdev)
+{
+	struct resource *io_res;
+	struct resource *ctl_res;
+	struct resource *irq_res;
+	struct pata_platform_info *pp_info = pdev->dev.platform_data;
+
+	/*
+	 * Simple resource validation ..
+	 */
+	if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) {
+		dev_err(&pdev->dev, "invalid number of resources\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Get the I/O base first
+	 */
+	io_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (io_res == NULL) {
+		io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (unlikely(io_res == NULL))
+			return -EINVAL;
+	}
+
+	/*
+	 * Then the CTL base
+	 */
+	ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1);
+	if (ctl_res == NULL) {
+		ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		if (unlikely(ctl_res == NULL))
+			return -EINVAL;
+	}
+
+	/*
+	 * And the IRQ
+	 */
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (irq_res)
+		irq_res->flags = pp_info ? pp_info->irq_flags : 0;
+
+	return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res,
+				     pp_info ? pp_info->ioport_shift : 0,
+				     pio_mask);
+}
+
+static int __devexit pata_platform_remove(struct platform_device *pdev)
+{
+	return __pata_platform_remove(&pdev->dev);
+}
 
 static struct platform_driver pata_platform_driver = {
 	.probe		= pata_platform_probe,
include/linux/pata_platform.h +9 -0
index 5799e8d..6a7a92d 100644
@@ -15,4 +15,13 @@ struct pata_platform_info {
 	unsigned int irq_flags;
 };
 
+extern int __devinit __pata_platform_probe(struct device *dev,
+					   struct resource *io_res,
+					   struct resource *ctl_res,
+					   struct resource *irq_res,
+					   unsigned int ioport_shift,
+					   int __pio_mask);
+
+extern int __devexit __pata_platform_remove(struct device *dev);
+
 #endif /* __LINUX_PATA_PLATFORM_H */
Signature · 1 line
1.5.2.2
#2 lore raw

PATCH v4 2/3 pata_of_platform: OF-Platform PATA device driver

In reply to Anton Vorontsov

This driver nicely wraps around pata_platform library functions, and provides OF platform bus bindings to the PATA devices.

Also add || PPC to the PATA_PLATFORM's "depends on" Kconfig entry, needed for PA Semi Electra.

---
 drivers/ata/Kconfig            |   12 ++++-
 drivers/ata/Makefile           |    1 +
 drivers/ata/pata_of_platform.c |  104 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 116 insertions(+), 1 deletions(-)
 create mode 100644 drivers/ata/pata_of_platform.c
drivers/ata/Kconfig +11 -1
index ba63619..64b4964 100644
@@ -607,13 +607,23 @@ config PATA_WINBOND_VLB
 
 config PATA_PLATFORM
 	tristate "Generic platform device PATA support"
-	depends on EMBEDDED || ARCH_RPC
+	depends on EMBEDDED || ARCH_RPC || PPC
 	help
 	  This option enables support for generic directly connected ATA
 	  devices commonly found on embedded systems.
 
 	  If unsure, say N.
 
+config PATA_OF_PLATFORM
+	tristate "OpenFirmware platform device PATA support"
+	depends on PATA_PLATFORM && PPC_OF
+	help
+	  This option enables support for generic directly connected ATA
+	  devices commonly found on embedded systems with OpenFirmware
+	  bindings.
+
+	  If unsure, say N.
+
 config PATA_ICSIDE
 	tristate "Acorn ICS PATA support"
 	depends on ARM && ARCH_ACORN
drivers/ata/Makefile +1 -0
index b13feb2..ebcee64 100644
@@ -67,6 +67,7 @@ obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp4xx_cf.o
 obj-$(CONFIG_PATA_SCC)		+= pata_scc.o
 obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
 obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
+obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
 obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
 # Should be last but two libata driver
 obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
drivers/ata/pata_of_platform.c new file +104 -0

104 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#6 lore raw

PATCH v4 3/3 MPC8349E-mITX: introduce localbus and pata nodes

In reply to Anton Vorontsov

This patch adds localbus and pata nodes to use CF IDE interface on MPC8349E-mITX boards.

Patch also updates defconfig and adds some code to probe localbus.

---
 arch/powerpc/boot/dts/mpc8349emitx.dts     |   17 ++++++++++++++++-
 arch/powerpc/configs/mpc834x_itx_defconfig |    3 ++-
 arch/powerpc/platforms/83xx/mpc834x_itx.c  |   12 ++++++++++++
 3 files changed, 30 insertions(+), 2 deletions(-)
arch/powerpc/boot/dts/mpc8349emitx.dts +16 -1
index e354f26..06d5b9c 100644
@@ -253,6 +253,21 @@
 		device_type = "pci";
 	};
 
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8349e-localbus",
+			     "fsl,pq2pro-localbus";
+		reg = <e0005000 d8>;
+		ranges = <3 0 f0000000 210>;
 
-
+		pata@3,0 {
+			compatible = "fsl,mpc8349emitx-pata", "ata-generic";
+			reg = <3 0 10 3 20c 4>;
+			reg-shift = <1>;
+			pio-mode = <6>;
+			interrupts = <17 8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
 };
arch/powerpc/configs/mpc834x_itx_defconfig +2 -1
index 6feb86e..2fbe4e5 100644
@@ -570,7 +570,8 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
arch/powerpc/platforms/83xx/mpc834x_itx.c +12 -0
index aa76819..50e8f63 100644
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
+#include <linux/of_platform.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -37,6 +38,17 @@
 
 #include "mpc83xx.h"
 
+static struct of_device_id __initdata mpc834x_itx_ids[] = {
+	{ .compatible = "fsl,pq2pro-localbus", },
+	{},
+};
+
+static int __init mpc834x_itx_declare_of_platform_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL);
+}
+machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
+
 /* ************************************************************************
  *
  * Setup the architecture
Signature · 1 line
1.5.2.2
#3 lore raw

Re: [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver

In reply to Anton Vorontsov

Hi Anton,

Juts one small trivial comment (could be fixed later).

Quoted 2 lines · On Wed, 9 Jan 2008 22:10:41 +0300 Anton Vorontsov <[email protected]>…

+static struct of_device_id pata_of_platform_match[] = {

This could be declared const.

Signature · 3 lines
Cheers,
Stephen Rothwell                    [email protected]
http://www.canb.auug.org.au/~sfr/
#4 lore raw

Re: [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver

Quoted 9 lines · Stephen Rothwell

Hi Anton,

Juts one small trivial comment (could be fixed later).

Quoted 2 lines · On Wed, 9 Jan 2008 22:10:41 +0300 Anton Vorontsov <[email protected]>…

+static struct of_device_id pata_of_platform_match[] = {

This could be declared const.

Good point, but let's not hold up merge based on this. Need something for janitors to do too, and it's good enough to merge as-is. :)

-Olof

#5 lore raw

Re: [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver

Quoted 6 lines · On Wed, 9 Jan 2008 18:36:34 -0600 Olof Johansson <[email protected]> wrote:
Quoted 4 lines · Stephen Rothwell

Hi Anton,

Juts one small trivial comment (could be fixed later).

Quoted 8 lines
Quoted 5 lines · On Wed, 9 Jan 2008 22:10:41 +0300 Anton Vorontsov <[email protected]>…
Quoted 2 lines

+static struct of_device_id pata_of_platform_match[] = {

This could be declared const.

Good point, but let's not hold up merge based on this. Need something for janitors to do too, and it's good enough to merge as-is. :)

Absolutely. To me that is what "(could be fixed later)" means. :-)

Signature · 3 lines
Cheers,
Stephen Rothwell                    [email protected]
http://www.canb.auug.org.au/~sfr/

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev

#7 lore raw
In reply to Anton Vorontsov

Hi,

I've applied 1/3 and 2/3 together with my electra_ide move to pasemi.git for-2.6.25, and will ask Paul to pull that. Kumar said he'd take 3/3.

I also added the const to the match table as spotted by Stephen.

-Olof

Quoted 40 lines · Anton Vorontsov

Hi all,

Here is the resend (aka v4) version of the OF-platform PATA driver and related patches.

Changes since v3:
- Acked-by: Paul Mundt <[email protected]>
- In the powerpc specific patch: update defconfig and use machine_device_initcall -- this is new call found in the galak/powerpc.git.

Changes since v2:
- "PPC" added to PATA_PLATFORM "depends on" Kconfig entry; I didn't remove EMBEDDED "depends on" -- this wasn't discussed much and these patches should not depend on the decision.
- cosmetic fixes;
- "s/ioport_shift/reg_shift/g" patch dropped.

Changes since v1:
- __pata_platform_probe now accepts pio_mask argument;
- pata-platform compatible property renamed to ata-generic;
- pata_of_platform understands pio-mode property. It's used to pass pio_mask to the __pata_platform_probe. That is, in ata-generic context pio-mode means "pio mode the bus already configured for";
- New optional patch that renames pata_platform_info's ioport_shift to reg_shift.

Changes since RFC:
- nuked drivers/ata/pata_platform.h;
- powerpc bits: proper localbus node added.

Signature · 8 lines
Anton Vorontsov
email: [email protected]
backup email: [email protected]
irc://irc.freenode.net/bd2
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
#9 lore raw

PATCH 1/1 pasemi: Move electra-ide to pata_of_platform

In reply to Anton Vorontsov

Move electra-ide glue over to the new pata_of_platform framework, and add the quirks needed to that driver.

---

Applied with the rest of the patches to pasemi.git for-2.6.25

 arch/powerpc/platforms/pasemi/electra_ide.c |   96 ----------------------------
 b/arch/powerpc/configs/pasemi_defconfig     |    4 -
 b/arch/powerpc/platforms/pasemi/Kconfig     |    9 --
 b/arch/powerpc/platforms/pasemi/Makefile    |    1 
 b/drivers/ata/pata_of_platform.c            |   20 ++++-
5 files changed, 17 insertions(+), 113 deletions(-)
arch/powerpc/configs/pasemi_defconfig +2 -2
index 9d21b08..797f0df 100644
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.24-rc6
-# Fri Dec 28 11:01:53 2007
+# Tue Jan 15 10:26:10 2008
 #
 CONFIG_PPC64=y
 
@@ -152,7 +152,6 @@ CONFIG_PPC_PASEMI=y
 CONFIG_PPC_PASEMI_IOMMU=y
 # CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
 CONFIG_PPC_PASEMI_MDIO=y
-CONFIG_ELECTRA_IDE=y
 # CONFIG_PPC_CELLEB is not set
 # CONFIG_PPC_PS3 is not set
 # CONFIG_PPC_CELL is not set
@@ -663,6 +662,7 @@ CONFIG_PATA_PCMCIA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
arch/powerpc/platforms/pasemi/Kconfig +0 -9
index b3458a1..348e061 100644
@@ -37,13 +37,4 @@ config PPC_PASEMI_MDIO
 	help
 	  Driver for MDIO via GPIO on PWRficient platforms
 
-config ELECTRA_IDE
-      tristate "Electra IDE driver"
-      default y
-      depends on PPC_PASEMI && ATA
-      select PATA_PLATFORM
-      help
-	This includes driver support for the Electra on-board IDE
-	interface.
-
 endmenu
arch/powerpc/platforms/pasemi/Makefile +0 -1
index f47fcac..2cd2a4f 100644
@@ -1,4 +1,3 @@
 obj-y	+= setup.o pci.o time.o idle.o powersave.o iommu.o
 obj-$(CONFIG_PPC_PASEMI_MDIO)	+= gpio_mdio.o
-obj-$(CONFIG_ELECTRA_IDE) += electra_ide.o
 obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o
arch/powerpc/platforms/pasemi/electra_ide.c deleted +0 -96

96 lines not on this page · raw message

drivers/ata/pata_of_platform.c +15 -5
index b7bc4e4..938f48a 100644
@@ -34,11 +34,20 @@ static int __devinit pata_of_platform_probe(struct of_device *ofdev,
 		return -EINVAL;
 	}
 
-	ret = of_address_to_resource(dn, 1, &ctl_res);
-	if (ret) {
-		dev_err(&ofdev->dev, "can't get CTL address from "
-			"device tree\n");
-		return -EINVAL;
+	if (of_device_is_compatible(dn, "electra-ide")) {
+		/* Altstatus is really at offset 0x3f6 from the primary window
+		 * on electra-ide. Adjust ctl_res and io_res accordingly.
+		 */
+		ctl_res = io_res;
+		ctl_res.start = ctl_res.start+0x3f6;
+		io_res.end = ctl_res.start-1;
+	} else {
+		ret = of_address_to_resource(dn, 1, &ctl_res);
+		if (ret) {
+			dev_err(&ofdev->dev, "can't get CTL address from "
+				"device tree\n");
+			return -EINVAL;
+		}
 	}
 
 	ret = of_irq_to_resource(dn, 0, &irq_res);
@@ -76,6 +85,7 @@ static int __devexit pata_of_platform_remove(struct of_device *ofdev)
 
 static struct of_device_id pata_of_platform_match[] = {
 	{ .compatible = "ata-generic", },
+	{ .compatible = "electra-ide", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, pata_of_platform_match);
#10 lore raw

Re: [PATCH] [POWERPC] pasemi: Move electra-ide to pata_of_platform

Quoted 5 lines · Olof Johansson

Move electra-ide glue over to the new pata_of_platform framework, and add the quirks needed to that driver.

---

Quoted 8 lines

Applied with the rest of the patches to pasemi.git for-2.6.25

 arch/powerpc/platforms/pasemi/electra_ide.c |   96 ----------------------------
 b/arch/powerpc/configs/pasemi_defconfig     |    4 -
 b/arch/powerpc/platforms/pasemi/Kconfig     |    9 --
 b/arch/powerpc/platforms/pasemi/Makefile    |    1 
 b/drivers/ata/pata_of_platform.c            |   20 ++++-
5 files changed, 17 insertions(+), 113 deletions(-)

ACK

#8 lore raw
In reply to Olof Johansson
Quoted 6 lines · Olof Johansson

Hi,

I've applied 1/3 and 2/3 together with my electra_ide move to pasemi.git for-2.6.25, and will ask Paul to pull that. Kumar said he'd take 3/3.

I also added the const to the match table as spotted by Stephen.

Great news, thank you!

Signature · 4 lines
Anton Vorontsov
email: [email protected]
backup email: [email protected]
irc://irc.freenode.net/bd2