sh: r2d - add lcd planel timings to sm501 platform data

@@ -14,6 +14,7 @@
 #include <linux/serial_8250.h>
 #include <linux/sm501.h>
 #include <linux/pm.h>
+#include <linux/fb.h>
 #include <asm/machvec.h>
 #include <asm/rts7751r2d.h>
 #include <asm/voyagergx.h>

@@ -129,9 +130,53 @@ static struct resource sm501_resources[]
 	},
 };
 
+static struct fb_videomode sm501_default_mode = {
+	.pixclock	= 35714,
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 105,
+	.right_margin	= 50,
+	.upper_margin	= 35,
+	.lower_margin	= 0,
+	.hsync_len	= 96,
+	.vsync_len	= 2,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+	.flags		= (SM501FB_FLAG_USE_INIT_MODE |
+			   SM501FB_FLAG_USE_HWCURSOR |
+			   SM501FB_FLAG_USE_HWACCEL |
+			   SM501FB_FLAG_DISABLE_AT_EXIT),
+
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub_crt,
+	.fb_pnl		= &sm501_pdata_fbsub_pnl,
+	.flags		= SM501_FBPD_SWAP_FB_ENDIAN,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+	.fb		= &sm501_fb_pdata,
+};
+
 static struct platform_device sm501_device = {
 	.name		= "sm501",
 	.id		= -1,
+	.dev		= {
+		.platform_data	= &sm501_platform_data,
+	},
 	.num_resources	= ARRAY_SIZE(sm501_resources),
 	.resource	= sm501_resources,
 };