Skip to contentSkip to conversation

My own TT S2-3200 problems ;-)

linux-dvb manu 1 participant 1 message Feb 27, 2008 1 message not in the archive Media (V4L/DVB)

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

manu

author
#1 lore raw
Quoted 58 lines · David BERCOT

Hi,

Like many others, I'm trying to use my TT S2-3200 under Debian. Before
trying softwares (VDR, etc...), I'd like to install it properly.

Here is my steps (from many tutorials) :
FIRMWARE

# mkdir /data/debian/DVB
# cd /data/debian/DVB
# wget http://www.linuxtv.org/downloads/firmware/dvb-ttpci-01.fw-2622
# cd /lib/firmware/
# cp -a /data/debian/DVB/dvb-ttpci-01.fw-2622 .
# ln -s dvb-ttpci-01.fw-2622 dvb-ttpci-01.fw

DRIVER

# cd /data/debian/DVB
# apt-get install mercurial
# hg clone http://jusst.de/hg/multiproto
# cd multiproto
# make
# make install
# modprobe stb6100
# modprobe stb0899
# modprobe lnbp21
# modprobe budget-ci

DMESG

# dmesg
saa7146: register extension 'budget_ci dvb'.
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 22
saa7146: found saa7146 @ mem ffffc20001598c00 (revision 1, irq 22)
(0x13c2,0x1019).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget S2-3200 PCI)
adapter has MAC addr = 00:d0:5c:0b:a5:8b
input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input9
budget_ci: CI interface initialised
stb0899_write_regs [0xf1b6]: 02
stb0899_write_regs [0xf1c2]: 00
stb0899_write_regs [0xf1c3]: 00
_stb0899_read_reg: Reg=[0xf000], data=81
stb0899_get_dev_id: ID reg=[0x81]
stb0899_get_dev_id: Device ID=[8], Release=[1]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400],
Offset=[0xf334], Data=[0x444d4431]
_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400],
Offset=[0xf33c], Data=[0x00000001] stb0899_get_dev_id: Demodulator
Core
ID=[DMD1], Version=[1] _stb0899_read_s2reg Device=[0xfafc], Base
address=[0x00000800], Offset=[0xfa2c], Data=[0x46454331]
_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800],
Offset=[0xfa34], Data=[0x00000001] stb0899_get_dev_id: FEC Core
ID=[FEC1], Version=[1] stb0899_attach: Attaching STB0899
stb6100_attach: Attaching STB6100 DVB: registering frontend 0 
(STB0899
Multistandard)... dvb_ca adaptor 0: PC card did not respond :(
Quoted 4 lines

Do you have any clue about this error ?

Thank you very much.

Hi David,
did you manage to test with the cam to get something working? I would be thrilled to know if someone has ever managed to get the TT 3200 to work with a CAM (I mean the full monty: lock+good picture ;-) Bye
Manu

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb