Skip to contentSkip to conversation

Please pull u-boot-83xx.git

U-Boot-Users Applied Kim Phillips 4 participants 4 messages Jan 29, 2008 – Feb 12, 2008

lore
Share & tools
lore
#0 lore raw

Wolfgang D.,

We're up to three versions of patches from different people to fix non-powerpc build breakage (due to the new SPI driver), so I decided to make this easy for you :)

I've chosen and applied Ben Warren's version of the fix (which declares the new CONFIG_MPC8XXX_SPI define), along with some seemingly harmless TQM834x flash size fixes. Please pull:

The following changes since commit 98b742489c09780be6a832eeaa4e5eff824792bb:
Wolfgang Denk (1):
inka4x0: remove dead code

are available in the git repository at:

git://www.denx.de/git/u-boot-mpc83xx.git

Ben Warren (1):
Fix conditional compilation of mpx8xxx_spi driver

Jens Gehrlein (2):
TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
TQM834x: enable DHCP

 drivers/spi/mpc8xxx_spi.c     |    4 ++--
 include/configs/MPC8349EMDS.h |    1 +
 include/configs/TQM834x.h     |    7 ++++---
 3 files changed, 7 insertions(+), 5 deletions(-)

Danke schoen,

Kim

#1 lore raw

Dear Kim,

Quoted 15 lines · in message <[email protected]> you wrote:

We're up to three versions of patches from different people to fix non-powerpc build breakage (due to the new SPI driver), so I decided to make this easy for you :)

I've chosen and applied Ben Warren's version of the fix (which declares the new CONFIG_MPC8XXX_SPI define), along with some seemingly harmless TQM834x flash size fixes. Please pull:

The following changes since commit 98b742489c09780be6a832eeaa4e5eff824792bb:
Wolfgang Denk (1):
inka4x0: remove dead code

are available in the git repository at:

Quoted 8 lines

git://www.denx.de/git/u-boot-mpc83xx.git

Ben Warren (1):
Fix conditional compilation of mpx8xxx_spi driver

Jens Gehrlein (2):
TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
TQM834x: enable DHCP

Applied, thanks a lot!

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
All this doesn't alter anything, you know. The world is still full of
stupid people. They don't use their brains. They don't seem  to  want
to think straight.                    - Terry Pratchett, _Soul Music_
#2 lore raw

[U-Boot-Users] Taishan or ppc440gx pci reset

Hi,
I'm using the amcc taishan board and have a pci-x device connected to it.
1) how do I take the pci device out of reset at boot up ?
2) and how do i reset the pci device ?

thanks
Kunal

_________________________________________________________________
Climb to the top of the charts!?Play the word scramble challenge with star power.
http://club.live.com/star_shuffle.aspx?icid=starshuffle_wlmailtextlink_jan

#3 lore raw

[U-Boot-Users] Taishan or ppc440gx pci reset

Quoted 2 lines · k b

I'm using the amcc taishan board and have a pci-x device connected to it.
1) how do I take the pci device out of reset at boot up ?

This will be done automatically upon bootup/reset.

Quoted 1 line

2) and how do i reset the pci device ?

I don't think that you can force a PCI reset manually. The PCI reset is most likely directly coupled with the board reset.

But why are you asking? Do you experience problems with PCI-X devices on Taishan?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================