[2.6.24] bcm203x bluetooth dongle does not work
Hi,
after trying around with my ancient bcm2033 bluetooth dongle i found it not working in 2.6.24 - I debugged udev and found it loading the firmware correctly but the device seems to have problems disconnecting.
I found an Ubuntu bug which mentions a patch which supposed to be 2.6.20 material. It still applies and fixes my problem:
Ubuntu Bug:
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/85247
Patch:
http://launchpadlibrarian.net/7058766/bcm203x-2.6.20-backport.diff
So it seems this patch never went in but most likely should.
Flo
Signature · 3 lines
Florian Lohoff [email protected] +49-171-2280134 Those who would give up a little freedom to get a little security shall soon have neither - Benjamin Franklin
Hi Florian,
Quoted 7 lines
after trying around with my ancient bcm2033 bluetooth dongle i found it not working in 2.6.24 - I debugged udev and found it loading the firmware correctly but the device seems to have problems disconnecting.
I found an Ubuntu bug which mentions a patch which supposed to be 2.6.20 material. It still applies and fixes my problem:
Quoted 7 lines
Ubuntu Bug:
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/85247Patch:
http://launchpadlibrarian.net/7058766/bcm203x-2.6.20-backport.diffSo it seems this patch never went in but most likely should.
we moved away from using a timer and using a workqueue now. It wrote the patch to use a workqueue and tested that it works. Starting with 2.6.19 we the usage of a workqueue is default. Can you verify that non of the kernels 2.6.19-2.6.23 are working. We might have missed a change inside the USB subsystem within the 2.6.24 timeframe.
Regards
Marcel
Quoted 5 lines · Marcel Holtmann
we moved away from using a timer and using a workqueue now. It wrote the patch to use a workqueue and tested that it works. Starting with 2.6.19 we the usage of a workqueue is default. Can you verify that non of the kernels 2.6.19-2.6.23 are working. We might have missed a change inside the USB subsystem within the 2.6.24 timeframe.
My tests were on 2.6.24 which does not work as described. Newer kernels dont boot due to crash in ide-cd so i cant test ...
Flo
Signature · 3 lines
Florian Lohoff [email protected] +49-171-2280134 Those who would give up a little freedom to get a little security shall soon have neither - Benjamin Franklin
Hi,
Quoted 5 lines · Marcel Holtmann
we moved away from using a timer and using a workqueue now. It wrote the patch to use a workqueue and tested that it works. Starting with 2.6.19 we the usage of a workqueue is default. Can you verify that non of the kernels 2.6.19-2.6.23 are working. We might have missed a change inside the USB subsystem within the 2.6.24 timeframe.
I went through the kernels i still have on this box (FSC LifeBook E8110) and here are the results. Except the debian 2.6.18-5-686 no newer kernel works. The onboard bluetooth works like a charm always whereas the bcm203x simply does not reconnect after loading firmware from 2.6.19 on.
2.6.18-5-686 (debian) works 2.6.19 breaks 2.6.21-rc5 breaks 2.6.22-rc5 breaks 2.6.22-2-686 (debian) breaks 2.6.23-1-686 (debian) breaks 2.6.24 breaks
It basically looks always like this:
<insert>
usb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice
Bluetooth: Broadcom Blutonium firmware driver ver 1.1
usbcore: registered new interface driver bcm203x
<wait for 30 seconds - then pull>
bcm203x_complete: URB failed with status -84
usb 1-1: USB disconnect, address 2
Flo
Signature · 3 lines
Florian Lohoff [email protected] +49-171-2280134 Those who would give up a little freedom to get a little security shall soon have neither - Benjamin Franklin