: move ColdFire pit.c to its own coldfire directory
PATCH 3/6 : move ColdFire pit.c to its own coldfire directory
Move common ColdFire CPU pit.c to common coldfire platform directory.
Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel.
Signed-off-by Greg Ungerer <[email protected]
arch/m68knommu/platform/5307/pit.c +0 -97
@@ -1,97 +0,0 @@ -/***************************************************************************/ - -/* -* pit.c -- Freescale ColdFire PIT timer. Currently this type of -* hardware timer only exists in the Freescale ColdFire -* 5270/5271, 5282 and other CPUs. -* -* Copyright (C) 1999-2007, Greg Ungerer ([email protected]) -* Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com) -*/ - -/***************************************************************************/ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/param.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <asm/machdep.h> -#include <asm/io.h> -#include <asm/coldfire.h> -#include <asm/mcfpit.h> -#include <asm/mcfsim.h> - -/***************************************************************************/ - -/* -* By default use timer1 as the system clock timer. -*/ -#define TA (a) (MCF_IPSBAR + MCFPIT_BASE1 + (a)) - -/***************************************************************************/ - -static irqreturn_t hw_tick (int irq,void *dummy) -{ -unsigned short pcsr; - -/* Reset the ColdFire timer */ - pcsr =__raw_readw (TA (MCFPIT_PCSR )); -__raw_writew (pcsr |MCFPIT_PCSR_PIF ,TA (MCFPIT_PCSR )); - -return arch_timer_interrupt (irq, dummy); -} - -/***************************************************************************/ - -static struct irqaction coldfire_pit_irq = { - .name ="timer" , - .flags =IRQF_DISABLED |IRQF_TIMER , - .handler = hw_tick, -}; - -void hw_timer_init (void ) -{ -volatile unsigned char *icrp; -volatile unsigned long *imrp; - -setup_irq (MCFINT_VECBASE +MCFINT_PIT1 , &coldfire_pit_irq); - - icrp = (volatile unsigned char *) (MCF_IPSBAR +MCFICM_INTC0 + -MCFINTC_ICR0 +MCFINT_PIT1 ); - *icrp =ICR_INTRCONF ; - - imrp = (volatile unsigned long *) (MCF_IPSBAR +MCFICM_INTC0 +MCFPIT_IMR ); - *imrp &= ~MCFPIT_IMR_IBIT ; - -/* Set up PIT timer 1 as poll clock */ -__raw_writew (MCFPIT_PCSR_DISABLE ,TA (MCFPIT_PCSR )); -__raw_writew (((MCF_CLK /2 ) /64 ) /HZ ,TA (MCFPIT_PMR )); -__raw_writew (MCFPIT_PCSR_EN |MCFPIT_PCSR_PIE |MCFPIT_PCSR_OVW | -MCFPIT_PCSR_RLD |MCFPIT_PCSR_CLK64 ,TA (MCFPIT_PCSR )); -} - -/***************************************************************************/ - -unsigned long hw_timer_offset (void ) -{ -volatile unsigned long *ipr; -unsigned long pmr, pcntr, offset; - - ipr = (volatile unsigned long *) (MCF_IPSBAR +MCFICM_INTC0 +MCFPIT_IMR ); - - pmr =__raw_readw (TA (MCFPIT_PMR )); - pcntr =__raw_readw (TA (MCFPIT_PCNTR )); - -/* -* If we are still in the first half of the upcount and a -* timer interrupt is pending, then add on a ticks worth of time. -*/ - offset = ((pmr - pcntr) * (1000000 /HZ )) / pmr; -if ((offset < (1000000 /HZ /2 )) && (*ipr &MCFPIT_IMR_IBIT )) - offset +=1000000 /HZ ; -return offset; -} - -/***************************************************************************/
arch/m68knommu/platform/coldfire/pit.c +97 -0
97 lines not on this page · raw message