Driver for dvb-T via usb : 1164:2efc
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi,
Are you interested to update the dib0700 driver to record that above mentionned YUAN device is working ?
Do you have any advice how to improve stability ?
Thanks,
Alain
Quoted 22 lines · Alain Roos
Hi,
- At the time of doing "hg clone", the head was :
changeset: 7115:3f704aa9d92e tag: tip date: Tue Jan 29 16:32:35 2008 -0200- The patch is attached (if you don't like attachments in this mailing list, all my apologies)
I'm running linux kernel 2.6.23.14, using distro Debian Etch, kaffeine as a TV viewer.
The only issue is that after some channel zapping or even immediately, the tuner does no longer respond, kaffeine hangs, modules cannot be unloaded even with rmmod -f (the dongle being disconnected). The lsusb command hangs also.
Only rebooting helps (and sucks).
The chips on the board are :
DIBcom 7070PB1-AXGXba-G-a
and
DIBcom 0700C-XCXXa-G
Quoted 4 lines
I would be most grateful if someone has an idea about improving the stability of the driver.
Also I've found in the archives a thread : http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015525.html
involving Patrick Boettcher and Michael Wünscher about a similar device
That ID was 1164:1efc
Quoted 4 lines
(I had the same driver information under Windows).
Alain Roos (Alsace / France)
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] [PATCH] Emtec 810S DVB-T Stick (164:2efc)
Hi,
I've something interesting in the unstability issue for my Emtec 810S DVB-T Stick
When the kaffeine TV screen freezes, the
dmesg indicates that the USB device is disconnected and syslog continus to report that i2c-adapter is used :
master_xfer[0] W or [1] R, addr= 0x40, len=2
Best regards,
Alain
Quoted 41 lines · Alain Roos
Hi,
Are you interested to update the dib0700 driver to record that above mentionned YUAN device is working ?
Do you have any advice how to improve stability ?
Thanks,
Alain
Quoted 22 lines · Alain Roos
Hi,
- At the time of doing "hg clone", the head was :
changeset: 7115:3f704aa9d92e tag: tip date: Tue Jan 29 16:32:35 2008 -0200- The patch is attached (if you don't like attachments in this mailing list, all my apologies)
I'm running linux kernel 2.6.23.14, using distro Debian Etch, kaffeine as a TV viewer.
The only issue is that after some channel zapping or even immediately, the tuner does no longer respond, kaffeine hangs, modules cannot be unloaded even with rmmod -f (the dongle being disconnected). The lsusb command hangs also.
Only rebooting helps (and sucks).
The chips on the board are :
DIBcom 7070PB1-AXGXba-G-a
and
DIBcom 0700C-XCXXa-GQuoted 4 lines
I would be most grateful if someone has an idea about improving the stability of the driver.
Also I've found in the archives a thread : http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015525.html
involving Patrick Boettcher and Michael Wünscher about a similar deviceThat ID was 1164:1efc
Quoted 2 lines
(I had the same driver information under Windows).
Quoted 9 lines
Quoted 2 lines
Alain Roos (Alsace / France)
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb