Skip to contentSkip to conversation

raid1 and raid 10 always writes all data to all disks?

DISCUSSION Keld Jørn Simonsen 2 participants 4 messages Feb 2, 2008 – Feb 4, 2008 MD RAID

lore
Share & tools
lore
#0 lore raw

I found a sentence in the HOWTO:

"raid1 and raid 10 always writes all data to all disks"

I think this is wrong for raid10.

eg

a raid10,f2 of 4 disks only writes to two of the disks - not all 4 disks. Is that true?

best regards
keld

#1 lore raw
Quoted 11 lines · Keld Jørn Simonsen

I found a sentence in the HOWTO:

"raid1 and raid 10 always writes all data to all disks"

I think this is wrong for raid10.

eg

a raid10,f2 of 4 disks only writes to two of the disks - not all 4 disks. Is that true?

I suspect that really should have read "all mirror copies," in the raid10 case.

Signature · 10 lines
Bill Davidsen <[email protected]>
 "Woe unto the statesman who makes war without a reason that will still
 be valid when the war is over..." Otto von Bismark 



-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#2 lore raw
Quoted 7 lines · Bill Davidsen
Quoted 6 lines · Keld Jørn Simonsen

I found a sentence in the HOWTO:

"raid1 and raid 10 always writes all data to all disks"

I think this is wrong for raid10.

Quoted 8 lines
Quoted 5 lines

eg

a raid10,f2 of 4 disks only writes to two of the disks - not all 4 disks. Is that true?

I suspect that really should have read "all mirror copies," in the raid10 case.

OK, I changed the text to:

raid1 always writes all data to all disks.

raid10 always writes all data to the number of copies that the raid holds. For example on a raid10,f2 or raid10,o2 of 6 disks, the data will only be written 2 times.

Best regards
Keld
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw
Quoted 16 lines · Keld Jørn Simonsen
Quoted 14 lines · Bill Davidsen
Quoted 12 lines · Keld Jørn Simonsen

I found a sentence in the HOWTO:

"raid1 and raid 10 always writes all data to all disks"

I think this is wrong for raid10.

eg

a raid10,f2 of 4 disks only writes to two of the disks - not all 4 disks. Is that true?

Quoted 7 lines
Quoted 2 lines

I suspect that really should have read "all mirror copies," in the raid10 case.

OK, I changed the text to:

raid1 always writes all data to all disks.

Just to be really pedantic, you might say "devices" instead of disks, since many or most arrays are on partitions. Otherwise I like this, it's much clearer.

Quoted 8 lines

raid10 always writes all data to the number of copies that the raid holds. For example on a raid10,f2 or raid10,o2 of 6 disks, the data will only be written 2 times.

Best regards
Keld

Signature · 10 lines
Bill Davidsen <[email protected]>
 "Woe unto the statesman who makes war without a reason that will still
 be valid when the war is over..." Otto von Bismark 



-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html